Al5A06 sheets by large cold plastic deformation usually have high strength but low plasticity,i.e.weak strength-plasticity matching,which may lead to their poor fatigue property.In this study,annealing treat-ments are...Al5A06 sheets by large cold plastic deformation usually have high strength but low plasticity,i.e.weak strength-plasticity matching,which may lead to their poor fatigue property.In this study,annealing treat-ments are applied on cold rotary forged Al5A06 sheets to regulate strength-plasticity matching and im-prove fatigue properties.The microstructures,tensile mechanical properties and fatigue properties un-der different annealing parameters were analyzed.The abnormal grain growth mechanism of cold rotary forged Al5A06 sheets during 300℃ annealing treatment was investigated,and the fatigue failure mech-anism of Al5A06 sheets with different annealing temperatures was also investigated.The abnormal grain growth during 300℃ annealing treatment is mainly due to the asynchronous recrystallization behavior with low recrystallization driving force,which leads to the early recrystallized regions directly absorb-ing adjacent grains along134crystal direction.The cold rotary forged Al5A06 sheets after 250℃-2 h annealing treatment exhibit the best fatigue property,which is mainly because the optimum strength-plasticity matching brings about coordinate plastic deformation throughout most grains,and the effective dislocation movement between adjacent grains can delay the appearance of strain localization and ac-commodate continuous fatigue cyclic loading.展开更多
中空注浆矿用锚索用6.20 mm 2200 MPa超高强度钢丝因强度要求高,生产难度大,在生产时容易出现断丝,表面处理时采用盐酸两道次浸泡酸洗,酸洗后水冲洗采用先高压水冲洗再浸泡洗然后再高压水冲洗的方式,水冲洗后选用锌系高温快速磷化液,磷...中空注浆矿用锚索用6.20 mm 2200 MPa超高强度钢丝因强度要求高,生产难度大,在生产时容易出现断丝,表面处理时采用盐酸两道次浸泡酸洗,酸洗后水冲洗采用先高压水冲洗再浸泡洗然后再高压水冲洗的方式,水冲洗后选用锌系高温快速磷化液,磷化时间3~5 min,选用8道次拉拔。采用该工艺生产的钢丝能够满足产品的要求。展开更多
基金financially supported by the National Natural Science Foundation of China(no.U21A20131)the Innovative Research Team Development Program of Ministry of Education of China(no.IRT17R83)for the support given to this research.
文摘Al5A06 sheets by large cold plastic deformation usually have high strength but low plasticity,i.e.weak strength-plasticity matching,which may lead to their poor fatigue property.In this study,annealing treat-ments are applied on cold rotary forged Al5A06 sheets to regulate strength-plasticity matching and im-prove fatigue properties.The microstructures,tensile mechanical properties and fatigue properties un-der different annealing parameters were analyzed.The abnormal grain growth mechanism of cold rotary forged Al5A06 sheets during 300℃ annealing treatment was investigated,and the fatigue failure mech-anism of Al5A06 sheets with different annealing temperatures was also investigated.The abnormal grain growth during 300℃ annealing treatment is mainly due to the asynchronous recrystallization behavior with low recrystallization driving force,which leads to the early recrystallized regions directly absorb-ing adjacent grains along134crystal direction.The cold rotary forged Al5A06 sheets after 250℃-2 h annealing treatment exhibit the best fatigue property,which is mainly because the optimum strength-plasticity matching brings about coordinate plastic deformation throughout most grains,and the effective dislocation movement between adjacent grains can delay the appearance of strain localization and ac-commodate continuous fatigue cyclic loading.
文摘中空注浆矿用锚索用6.20 mm 2200 MPa超高强度钢丝因强度要求高,生产难度大,在生产时容易出现断丝,表面处理时采用盐酸两道次浸泡酸洗,酸洗后水冲洗采用先高压水冲洗再浸泡洗然后再高压水冲洗的方式,水冲洗后选用锌系高温快速磷化液,磷化时间3~5 min,选用8道次拉拔。采用该工艺生产的钢丝能够满足产品的要求。
