期刊文献+

基于电磁作用增加轮轨黏着力的仿真研究 被引量:5

Simulation Research on Increasing Wheel-Rail Adhesion Based on Electromagnetic Effect
在线阅读 下载PDF
导出
摘要 针对列车牵引和制动时黏着力不足的问题,基于电磁作用原理提出一种安装在转向架上的新型电磁增黏装置。围绕高速旋转车轮,设置电磁线圈,建立电磁增黏装置基本结构模型,在车轮与钢轨之间形成电磁场,分析轮轨之间电磁作用力随列车速度的变化规律,以及电磁吸力对轮轨黏着力的影响。通过调整线圈高度和厚度比例及围绕车轮上下空间的布置,强化轮轨接触附近的磁场强度和磁力线分布,设计电磁增黏装置导磁外壳形式和气隙控制磁路的导向及作用范围,同时考虑车辆限界及安装条件,优化性能和结构参数。仿真结果表明,电磁增黏装置可以明显提高各个速度阶段轮轨之间垂向压力,增加轮轨黏着力;同时,通过调节两侧车轮压力,可提高列车运行平稳性。 Aimed at the problem of insufficient adhesion during train traction and braking,a novel electromagnetic thickening device mounted on the bogie is proposed based on the principle of electromagnetic action. Around the high-speed rotating wheel,the electromagnetic coil is set,the basic structural model of the electromagnetic thickening device is established,an electromagnetic field between the wheel and the rail is formed, and the variation law of the electromagnetic force between the wheel and the rail with the train speed,and the impact of electromagnetic attraction on the wheel rail adhesion are analyzed. By adjusting the coil height and thickness ratio and the arrangement around the upper and lower spaces of the wheel,the magnetic field strength and the magnetic field line distribution near the wheel-rail contact are strengthened, and the electromagnetically-adhesive device magnetic conductive shell form and the air gap control magnetic circuit are guided and scoped,and the vehicle is considered,taking into consideration the limit and installation conditions to optimize performance and structural parameters. The simulation results show that the electromagnetic thickening device can significantly improve the vertical pressure between the wheel and rail at each speed stage,and can increase the wheel-rail adhesion. At the same time,by adjusting the pressure at both sides of the wheel,the running stability of the train can be improved.
作者 应之丁 陈家敏 YING Zhiding;CHEN Jiamin(Institute of Railway Transit,Tongji University,Shanghai 201804,China)
出处 《同济大学学报(自然科学版)》 EI CAS CSCD 北大核心 2020年第1期101-104,共4页 Journal of Tongji University:Natural Science
基金 国家重点研发计划(2017YFB1201302-12B) 上海市自然科学基金(17ZR1432000)
关键词 轮轨关系 轮轨增压 电磁场分析 仿真优化 wheel-rail interface wheel and rail pressurization electromagnetic field analysis simulation and optimization
  • 相关文献

参考文献8

二级参考文献58

  • 1孙翔.高粘着利用机车的系统设计[J].西南交通大学学报,1994,29(3):235-248. 被引量:12
  • 2王文健,刘启跃.车轮剥离性能试验研究[J].西南交通大学学报,2005,40(2):228-231. 被引量:15
  • 3黄志辉,张红军,孙永鹏.三轴转向架一系悬挂弹簧设计[J].机车电传动,2005(4):36-37. 被引量:12
  • 4熊嘉阳,金学松.铁路曲线钢轨初始波磨演化分析[J].机械工程学报,2006,42(6):60-66. 被引量:15
  • 5龚积球 张定贤.轮轨间的粘着及滑动[J].机车电传动,1986,(5).
  • 6H.Verbeeck 善方法.关于车轮和钢轨间粘着的现在认识及其利用和改善方法.铁道部科技情报研究所专题情报资料[M].,1975,11..
  • 7HERNANDEZ E G, LEWIS R. Twin disc assessment of wheel/rail adhesion[J]. Wear, 2008 (265): 1 309-1 316.
  • 8NICCOL1NI E, BERTHIER Y. Wheel-rail adhesion: Laboratory study of "natural" third body role on locomotives wheels and rails[J]. Wear, 2005 (258): 1 172- 1 178.
  • 9HERNANDEZ E G, LEWIS R. Twin disc assessment of wheel/rail adhesion[J]. Wear, 2008 (265): 1 309-1 311.
  • 10POLACH O. Creep force in simulations of traction vehicles running on adhesion limit[J]. Wear, 2005 (258): 992- 1 000.

共引文献107

同被引文献159

引证文献5

二级引证文献41

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部