期刊文献+

多尺度纳米银烧结接头连接强度及塑性 被引量:3

Bonding strength and plasticity of multiscale composite nanosilver paste for low temperature sintering
在线阅读 下载PDF
导出
摘要 以低温烧结连接使用的纳米银膏为研究对象,通过计算获得银膏中纳米银颗粒与微米银颗粒的最佳配比并制备复合银膏.研究了银膏中不同溶剂对接头孔隙形成的影响,对比了纳米银膏与复合银膏硬度、弹性模量及塑性因子.结果表明,在250℃的烧结温度下松油醇和酒精的混合有机溶剂有利于烧结接头质量的提升,其烧结层孔隙率明显低于乙二醇制备的复合银膏烧结接头.与纳米银膏烧结接头相比,复合银膏烧结层压痕面积较大,硬度与弹性模量较低.当烧结时间为10~30 min时,复合银膏烧结层塑性因子高于纳米银膏烧结层. Nano silver paste for low temperature sintering bonding was studied.The optimal ratio of nano silver particles to micro silver particles in the silver paste was calculated and then was made into composite silver paste.The effect of different solvents on the porosity of the sintering joint was investigated.Meanwhile,the hardness,elastic modulus,and plasticity of the sintered joints by nano silver paste and micro silver paste were studied.The results indicated that the composite silver paste using the mixed organic solvent improved the quality of the sintered joints under 250°C.The porosity in the joints was significantly lower using the mixed organic solvent than that using glycol.Compared with nano silver sintered joints,the sintered joints using composite silver paste showed larger indentation area but lower hardness and elastic modulus.When the sintering time ranged from 10min to 30min,the plasticity of the composite silver joints was higher than that of the nano silver sintered joints.
作者 李昭 刘洋 张浩 孙凤莲 LI Zhao;LIU Yang;ZHANG Hao;SUN Fenglian(Harbin University of Science and Technology,Harbin 150040,China)
机构地区 哈尔滨理工大学
出处 《焊接学报》 EI CAS CSCD 北大核心 2019年第10期106-110,I0005,I0006,共7页 Transactions of The China Welding Institution
基金 国家自然科学基金资助项目(51604090) 黑龙江省自然科学基金资助项目(E2017050) 黑龙江省普通本科高等学校青年创新人才培养计划资助项目(UNPYSCT-2015042)
关键词 低温烧结 复合银膏 硬度 弹性模量 塑性 low temperature sintering composite silver paste hardness elastic modulus plasticity
  • 相关文献

参考文献3

二级参考文献65

  • 1肖久梅,黄继华.微电子互连用导电胶研究进展[J].中国胶粘剂,2004,13(6):43-48. 被引量:10
  • 2邹贵生,吴爱萍,胡乃军,白海林,王延军,任家烈,宋秀华,易汉平,宗军,史锴.Bi-Sr-Ca-Cu-O高温超导材料的连接技术[J].金属热处理,2006,31(6):1-9. 被引量:3
  • 3王春青,田艳红,孔令超.电子封装与组装无铅化应用中的问题[J].半导体行业,2006(6):46-51. 被引量:2
  • 4张启运.无铅钎焊的困惑、出路和前景[J].焊接,2007(2):6-10. 被引量:21
  • 5PUTTLITZ K Z,GALYON G T.Impact of the ROHS Directive on high-performance electronic systems[J].Journal of Materials Science:Materials in Electronics,2007,18(1):347-365.
  • 6TU K N,GUSAK A M,LI M.Physics and materials challenges for lead-free solders[J].Journal of Applied Physics,2003,93(3):1335-1353.
  • 7ALLEN G L,BAYLES R A,GIL W W,et al.Small particle melting of pure metals[J].Thin Solid Films,1986,144:297-308.
  • 8GROZA J R,DOWDING R J.Nanoparticulate materials densification[J].Nanostructured Materials,1996,7(7):749-768.
  • 9BAI J H,LU G Q.Thermomechanical reliability of low-temperature sintered silver die attached sic power device assembly[J].IEEE Transactions on Device and Materials Reliability,2006,6(3):436-441.
  • 10DEEGAN R D,BAKAJIN O,DUPONT T F,et al.Capillary flow as the cause of ring stains from dried liquid drops[J].Nature,1997,389:827-829.

共引文献55

同被引文献12

引证文献3

二级引证文献9

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部