期刊文献+

影响螺纹锁固厌氧胶性能的因素研究 被引量:8

Study on influence factors of anaerobic adhesives properties for thread-locking
原文传递
导出
摘要 以BPA2EODMA(乙氧化双酚A二甲基丙烯酸酯)和EA(双酚A环氧丙烯酸酯)为主要原料、异丙苯过氧化氢(CHP)为引发剂、1,4-萘醌为阻聚剂、N,N-二甲基苯胺为促进剂和糖精为助促进剂,采用单因素试验法优选出厌氧胶的最佳配方。结果表明:当m(BPA2EODMA):m(EA)=3:7、w(CHP)=3.0%、w(N,N-二甲基苯胺)=0.8%、w(糖精)=0.5%和w(1,4-萘醌)=0.03%时,厌氧胶的综合性能较好,其剪切强度达到26 MPa,施工性能及储存稳定性能俱佳。 With BPA2EODMA(ethoxylated bisphenol A dimethacrylate) and EA(bisphenol A epoxy acrylate) as main raw materials,cumene hydroperoxide(CHP) as initiator,1,4-naphthoquinone as inhibitor,N,N-dimethyl aniline and saccharin as main accelerant and secondary accelerant respectively,the optimal formula of anaerobic adhesive was preferred by single factor experiment method.The results showed that the combination property of anaerobic adhesive was better because its had higher shear strength(26 MPa),good operation property and storage stability when mass ratio of m(BPA2EODMA):m(EA) was 3:7,mass fraction of CHP and N,N-dimethyl aniline were 3.0% and 0.8% respectively,mass fraction of saccharin and 1,4-naphthoquinone were 0.5% and 0.03% respectively.
出处 《中国胶粘剂》 CAS 北大核心 2011年第4期31-35,共5页 China Adhesives
关键词 厌氧胶 乙氧化双酚A二甲基丙烯酸酯 双酚A环氧丙烯酸酯 异丙苯过氧化氢 N N-二甲基苯胺 定位时间 anaerobic adhesive ethoxylated bisphenol A dimethacrylate(BPA2EODMA) bisphenol A epoxy acrylate(EA) cumene hydroperoxide(CHP) N N-dimethyl aniline locating time
  • 相关文献

参考文献8

二级参考文献18

  • 1匡志祥 杨颖泰.一种可预涂厌氧胶的组成[P].CN1086240.1994.
  • 2梁义勋 贾缉熙.单组份螺纹锁固和平面密封厌氧胶的制备方法[P].CN1226589.1999.
  • 3S.阿塔瓦拉 G.M.马瑟拉 H. K.楚 等.室温固化的可控强度耐高温厌氧粘合剂组合物[P].CN265118.1999.
  • 4王兵 李印柏 林新松 等.一种厌氧胶及其制备方法[P].CN1159471.1997.
  • 5John G. Susanne Morrill. Claran B. Allylic phenyl ether (meth) acrylate compositions and novel allylic phenyl ether (meth)acrylate mon omers[P]. US6,231,714B1, 2001-5-15.
  • 6Frederick F, Paul J. Structural Anaerobic adhesive composition with improved cure speed and strength[P]. US 6, 596,808B2,2003- 6 - 22.
  • 7Shabbir Attarwala,Richard D Rich, Natalie R Li. Anaerobic compositions with enthaned toughness and crack resistance[P]. US 2003/0036601A1,200a- 2- 20.
  • 8大森英三[日].丙烯酸酯及其聚合物[M].北京:化学工业出版社,1985.
  • 9杨颖泰.关于厌氧胶质量与技术指标一些问题的讨论[J].粘接,1997,18(1):24-27. 被引量:7
  • 10北京粘接学会编译,李金林.胶粘剂技术与应用手册[M]宇航出版社,1991.

共引文献15

同被引文献42

引证文献8

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部