Tetrahydrofuran(THF) extract of coal tar pitch(CTP) was used instead of blending CTP with pretreated pyrolysis fuel oil to prepare an isotropic pitch precursor with excellent spinnability for general-purpose carbon fi...Tetrahydrofuran(THF) extract of coal tar pitch(CTP) was used instead of blending CTP with pretreated pyrolysis fuel oil to prepare an isotropic pitch precursor with excellent spinnability for general-purpose carbon fibre through bromination-dehydrobromination. The feasibility and effectiveness of synthesising an isotropic pitch precursor derived from THF-soluble(CTP-THFs) is demonstrated in this study.The results show that CTP-THFs contains more light components than CTP;CTP-THFs and CTP monomer proportions were 62.52% and 45.32%, respectively. However, based on comparisons of CTP-THFsBr0 and CTPBr0 characterisations, CTP-THFs exhibits better polycondensation than CTP. Bromination-dehydrobro mination promotes polycondensation of pitch precursors, leading to greater carbon aromaticity in CTP-THFsBr5, CTP-THFsBr10, and CTP-THFsBr15 than that in CTP-THFsBr0 and CTPBr0. CTP-THFsBr5 and CTP-THFsBr10 have excellent spinnability even with softening points as high as 230 ℃. The pericondensed carbon and carbon aromaticity of CTP-THFsBr5 and CTP-THFsBr10 are high owing to the higher degree of polycondensation;however, they still possess a more linear molecular structure. The as-prepared carbon fibre exhibits homogeneity and uniformity, and the mechanical performance is comparable with that of commercial general-purpose carbon fibre products.展开更多
Mesophase pitch carbon fibers have an ultra-high modulus and thermal conductivity that are unmatched by other carbon fibers,making it irreplaceable in many fields.However,due to the high temperature dependence of the ...Mesophase pitch carbon fibers have an ultra-high modulus and thermal conductivity that are unmatched by other carbon fibers,making it irreplaceable in many fields.However,due to the high temperature dependence of the viscosity of the melted pitch and the poor mechanical properties of pitch fibers,it is difficult to reduce the fiber diameter when using continuous spinning.We used the Mathworks Matlab software to optimize the mesophase pitch melt spinning model and to simulate the effects of spinning temperature,mass flow rate,winder speed,and quenching air temperature near the spinneret on the maximum shear rate during drawing.Simulation results demonstrate that applying gradient cooling to the melt upon exiting the spinneret significantly reduces the maximum shear rate and extends the drawing zone,thereby promoting the spinning stability and helping reduce the fiber diameter.In the experiment,instead of quenching in air,we applied gradient cooling to the melt,whose temperature decreased according to the equation Ta=298+278exp(−11.4z),where Ta is the final air temperature in Kelvin,and z is the distance from the spinneret in meters.It was found the gradient cooling greatly improved the draw-down ratio,reducing the average diameter of the pitch fibers from 20.8 to 13.1μm,along with improved process stability.The experimental results are in excellent agreement with the predictions.At the same time,the tensile strength of the 1150℃ carbonized fibers increased from 0.6 to 1.1 GPa.Although the degree of orientation of the fibers decreased slightly,the tight bonding between microcrystals,the suppression of splitting,and the smaller diameter improved the mechanical properties of carbon fibers.This study provides an effective method for reducing the fiber diameter while improving continuity.展开更多
基金the financial support provided by the National Natural Science Foundation of China (22008254)the Fundamental Research Funds for the Central Universities (2020XJHH01)+1 种基金the National Training Program of Innovation and Entrepreneurship for Undergraduates (C202003309)China University of Mining and Technology (Beijing) Yueqi Outstanding Scholar Project (2020JCB02)。
文摘Tetrahydrofuran(THF) extract of coal tar pitch(CTP) was used instead of blending CTP with pretreated pyrolysis fuel oil to prepare an isotropic pitch precursor with excellent spinnability for general-purpose carbon fibre through bromination-dehydrobromination. The feasibility and effectiveness of synthesising an isotropic pitch precursor derived from THF-soluble(CTP-THFs) is demonstrated in this study.The results show that CTP-THFs contains more light components than CTP;CTP-THFs and CTP monomer proportions were 62.52% and 45.32%, respectively. However, based on comparisons of CTP-THFsBr0 and CTPBr0 characterisations, CTP-THFs exhibits better polycondensation than CTP. Bromination-dehydrobro mination promotes polycondensation of pitch precursors, leading to greater carbon aromaticity in CTP-THFsBr5, CTP-THFsBr10, and CTP-THFsBr15 than that in CTP-THFsBr0 and CTPBr0. CTP-THFsBr5 and CTP-THFsBr10 have excellent spinnability even with softening points as high as 230 ℃. The pericondensed carbon and carbon aromaticity of CTP-THFsBr5 and CTP-THFsBr10 are high owing to the higher degree of polycondensation;however, they still possess a more linear molecular structure. The as-prepared carbon fibre exhibits homogeneity and uniformity, and the mechanical performance is comparable with that of commercial general-purpose carbon fibre products.
文摘Mesophase pitch carbon fibers have an ultra-high modulus and thermal conductivity that are unmatched by other carbon fibers,making it irreplaceable in many fields.However,due to the high temperature dependence of the viscosity of the melted pitch and the poor mechanical properties of pitch fibers,it is difficult to reduce the fiber diameter when using continuous spinning.We used the Mathworks Matlab software to optimize the mesophase pitch melt spinning model and to simulate the effects of spinning temperature,mass flow rate,winder speed,and quenching air temperature near the spinneret on the maximum shear rate during drawing.Simulation results demonstrate that applying gradient cooling to the melt upon exiting the spinneret significantly reduces the maximum shear rate and extends the drawing zone,thereby promoting the spinning stability and helping reduce the fiber diameter.In the experiment,instead of quenching in air,we applied gradient cooling to the melt,whose temperature decreased according to the equation Ta=298+278exp(−11.4z),where Ta is the final air temperature in Kelvin,and z is the distance from the spinneret in meters.It was found the gradient cooling greatly improved the draw-down ratio,reducing the average diameter of the pitch fibers from 20.8 to 13.1μm,along with improved process stability.The experimental results are in excellent agreement with the predictions.At the same time,the tensile strength of the 1150℃ carbonized fibers increased from 0.6 to 1.1 GPa.Although the degree of orientation of the fibers decreased slightly,the tight bonding between microcrystals,the suppression of splitting,and the smaller diameter improved the mechanical properties of carbon fibers.This study provides an effective method for reducing the fiber diameter while improving continuity.
