期刊文献+

晶须转动对铝基复合材料热压缩变形行为的影响 被引量:3

Effect of the whisker rotation on the hot compressive deformation behavior of an aluminum matrix composite
在线阅读 下载PDF
导出
摘要 采用平面应变有限元方法研究了晶须转动对晶须增强铝基复合材料热压缩变形行为的影响.数值结果表明:晶须转动不仅引起晶须承载能力的下降,而且也影响基体的塑性变形行为,同时复合材料在热压缩变形过程中表现出明显的应变软化行为.数值分析研究进一步证明:晶须转动是复合材料出现应变软化的重要原因. The effect of the whisker rotation on the hot compressive deformation behavior of the whisker reinforced aluminum matrix composite is investigated by the plane strain finite element method. Numerical results show that the whisker rotation induces a reduction in the whisker carrying load ability and influences the plastic deformation behavior of the matrix. Meanwhile, the composite exhibits significant strain softening during the hot compression. It is proved that the whisker rotation is an important reason for the composite softening.
出处 《材料科学与工艺》 EI CAS CSCD 2004年第1期61-63,66,共4页 Materials Science and Technology
基金 国家自然科学基金资助项目(50071018) '973'资助项目(G2000067206).
关键词 晶须转动 铝基复合材料 热压缩变形 平面应变有限元法 承载能力 应变软化 metal matrix composite whisker rotation hot compressive deformation behavior
  • 相关文献

参考文献8

  • 1韩荣第,刘建,韩滨.SiCw/Al铝复合材料振动攻丝扭矩的试验研究[J].哈尔滨工业大学学报,2002,34(2):252-254. 被引量:6
  • 2张文龙,吴培莲,姜传海,丁冬雁,王德尊,姚忠凯.SiCw/6061Al复合材料的晶须取向与压缩变形行为[J].哈尔滨工业大学学报,1999,31(1):5-9. 被引量:2
  • 3BEATRICE LAY.MAURICE BOIVIN.Thermo—elasto-plastic behaviour of a metal matrix composite Al-6061/SiC and the effect of a precipotate-free zone around the reinforcement[J].Journal of Materials Processing Technology,1995,55:261-267.
  • 4STANDFORD—BEALE C A,CLYNE T W.Extrusion and high temperature deformation of fiber—reinforced aluminum composite[J].Composite Science and Technology,1989,36(2):121—157.
  • 5GENG L,OCHIAI S,HU J Q,et al.Compression testing of a SiCw/Al composite at temperature close to and above the solidus of the matrix alloy[J].Materials Science and Engineering,1998,A246:302—305.
  • 6XIONG Z,GENG L,YAO C K.Investigation of high temperature deformation behavior of a SiC whisker reinforced 6061 aluminum composite[J].Composite Science and Technology,1990,39(2):117—125.
  • 7SORENSEN N J.SURESH S,TVERGAARD V.et al.Effects of reinforcement orientation on the tensile response of metal—matrix composites[J]. Materials Science and Engineering,1995,A197:1—10.
  • 8DONG M.SCHMAUDER S,BIDLINGMMER T,et al.Prediction off the mechanical behaviour of short fiber reinforeed MMCs by combined cell model[J].Computational Material Science,1997,9:121—133.

二级参考文献10

  • 1隈部淳一郎.精密加工振动切削[M].机械工业出版社,1985..
  • 2胡俊青,硕士学位论文,1997年
  • 3Liu Y L,Scripta Mater,1996年,35卷,2期,253页
  • 4Wang Lei,Scripta Mater,1996年,35卷,8期,973页
  • 5费维栋,金属学报,1994年,30卷,6期,B283页
  • 6林均品,金属科学与工艺,1988年,7卷,2期,107页
  • 7卢光熙,金属学教程,1985年,10卷,301页
  • 8胡赓祥,金属学,1982年
  • 9耿林,袁哲俊,董申,姚忠凯.SiCw/Al复合材料切削表面层中SiC-Al界面观察(英文)[J].哈尔滨工业大学学报,1992,24(5):105-107. 被引量:1
  • 10耿林,董申,袁哲俊.SiCw/6061Al复合材料的切削机理研究[J].哈尔滨工业大学学报,1992,24(5):60-64. 被引量:2

共引文献6

同被引文献19

  • 1张雪囡,耿林,王桂松.热挤压对SiCw·SiCp/2024Al组织与性能的影响[J].材料科学与工艺,2004,12(5):482-485. 被引量:9
  • 2郑晶,王智民,王建军,刘明华,张冀粤.热挤压变形对Al-Si复合材料组织性能的影响[J].铸造技术,2006,27(8):839-841. 被引量:3
  • 3WANG G S. GENG L, ZHENG Z Z, et al. Investigation of compression of SiCw/6061Al composites around the solidus of the matrix alloy [ J]. Materials Chemistry and Physics,2001, 70(2): 164- 167.
  • 4HONG S H, CHUNG K H, LEE C H. Effects of hot extrusion parameters on the tensile properties and microstructures of SiCw- 2124Al composites [J]. Materials Science and Engineering A, 1996,206 (2) :225 - 232.
  • 5BORREGO Alberto, FERNANDEZ Ricardo, CARMEN CRISTINA Mariadel. et al. Influence of extrusion temperature on the microstructure and the texture of 6061Al- 15vol. % SiCw PM composites [J]. Composites Science and Technology.2002,62 (6): 731 - 742.
  • 6THAM L.M, GUPTA M, GHENG L. Effect of reinforcement volume fraction on the evolution of reinforcement size during the extrusion of Al - SiC composites [ J ]. Materials Science and Engineering: A, 2002,326:355 - 363.
  • 7L.G. LIM, DUNNE F P E. Modelling central bursting in the extrusion of particulate reinforced metal matrix composite materials [ J]. International of Machine Tools and Manufacture, 1997, 37 (7) :901 - 915.
  • 8XU H, PALMIERE E J. Particulate refinement and redistribution during the axisymmetric compression of an Al/SiCp metal matrix composites [ J ]. Composites Part A, 1999, 30(3): 203 - 211.
  • 9CORBIN S F, WILKINSON D S. The influence of particle distribution on the mechanical response of a particulate metal matrix composites [J]. Acta Metall Mater, 1994,42(4): 1311 - 1318.
  • 10GENG L, OCHIAS I, HU J Q, et al. Compression testing of a SiCw/Al composite at temperature close to and above the solidus of the matrix alloy [ J ]. Materials Science and Engineering, 1998, A246: 302 - 305.

引证文献3

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部