期刊文献+

切削刀具PVD涂层技术的研究与发展 被引量:8

在线阅读 下载PDF
导出
摘要 PVD涂层技术较之CVD具有显著优点,成为新型刀具涂层的主流技术之一。低温沉积最有效的磁控溅射方法,沉积速率高,工作气压低,镀膜质量高,工艺稳定,便于大规模工业生产,在切削刀具涂层应用中发展迅速。切削加工技术发展对刀具涂层硬度耐磨性抗氧化性与基体结合强度等综合机械性能的要求不断提高,超硬多元和多层等新型涂层得到开发,尤其是基于低温PVD沉积技术的纳米复合涂层正在成为研究热点,并显示出良好的发展前景。
出处 《机电技术》 2003年第B09期88-92,共5页 Mechanical & Electrical Technology
  • 相关文献

参考文献11

  • 1王福贞,闻立时编著,中国机械工程学会热处理学会主编.表面沉积技术[M]. 机械工业出版社, 1989
  • 2GredicT,ZlatanovicM.Properties of tin coatings deposited onto hotworksteel substrates plasma nit rided at low pressure[].Surface&CoatingsTechnology.1992
  • 3ZlatanovicM,GredicT,KunosicA.Substrate-induced changes inTiN and(Ti,Al)N coatings due to plasma nitriding[].Surface&CoatingsTechnology.1994
  • 4KorhonenA S,SirvioE H,Sulonen,M S.Plasma nitriding and ion plating with an intensified glow discharge[].Thin Solid films.1983
  • 5ReichelK,BrandlW,MackM,UrlbergerH H,KlenzH.Hybridtechnik zumHerstellen korrosions- und verschleissbestaendigerSchichtkombinationen(Hybrid technique for the production of corrosion- and wear-resistant coating combinations)[].Galvanotechnik.1990
  • 6PetrovI,LosbichlerP,BergstromD et al.Ion-assisted growth ofTi1-xAlxN/Ti1-yNbyN multilayers by combined cathodic-arc/magnetron-sputter deposition[].Thin Solid films.1997
  • 7DingremountN,BergmannE,CollignonP etal.Optimization of duplex coatings built from nitriding and ion plating with continuous and discontinuous operation for construction and hot working steels[].Surface&CoatingsTechnology.1995
  • 8RandawaH,JohnsonP C.Technical note:A review of cathodic arc plasma deposition processes and their application[].Surface&CoatingsTechnology.1987
  • 9ArcherN J.Plasma-assisted chemical vapour deposition ofTiC,TiN andTiCxN1-x[].Thin Solid films.1981
  • 10VoevodinAA,OneillJ P,ZabinskiJ S.Nanocomposite tribological coatings for aerospace applications[].Surface&CoatingsTechnology.1999

同被引文献144

引证文献8

二级引证文献85

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部