摘要
为研究应用超声波无缝压胶工艺生产经编无痕泳衣的最佳工艺参数,选取经编锦/氨泳衣面料,以接缝强力和胶条剥离强度作为评价指标,通过对超声波刀轮速度、热风温度、风嘴气压、热压时间和热压温度5个工艺参数设置正交实验,利用极差法和多元线性回归分析这些工艺参数对缝口性能的影响。研究结果表明:最优性能的组合方案为超声波刀轮速度250 cm/min、热风温度290℃、风嘴气压0.06 MPa、压胶时间25 s、压胶温度180℃。经检验发现,根据最佳工艺参数组合制作的经编泳衣面料样品在浸水和水洗后的耐用性符合相关质量标准。
To study the optimal process parameters for producing seamless knitted swimwear using ultrasonic seamless bonding process.Selected warp-knitted nylon/spandex swimwear fabric,with seam strength and adhesive strip peel strength were employed as the evaluation indicators.An orthogonal experiment was conducted with five key process parameters.The impact of these parameters on seam performance was assessed through range analysis and multiple linear regression.Results suggest that an optimal parameter combination,including specific values for ultrasonic knife wheel speed(250 cm/min),hot air temperature(290℃),nozzle air pressure(0.06 MPa),pressing time(25 s),and pressing temperature(180℃),significantly enhances seamless seam performance.Testing confirmed that warp-knitted swimsuit fabric samples produced with these parameters met quality standards for durability post-immersion and water washing.
作者
刘骏
刘苏
LIU Jun;LIU Su(Department of Modern Garment,Anhui University of Applied Technology,Hefei Anhui 230011,China;Research Institute for IntelligentWearable Systems,The Hong Kong Polytechnic University,Hong Kong 999077,China)
出处
《武汉纺织大学学报》
2025年第6期14-18,共5页
Journal of Wuhan Textile University
基金
安徽省高校自然科学研究重点项目(2023AH051430)
安徽省高校自然科学研究重大项目(2023AH040202)
安徽省高校人文社科研究重点项目(2023AH051405)。
关键词
经编无痕泳衣
超声波无缝压胶
工艺参数
接缝强力
剥离强度
knitted seamless swimsuit
ultrasonic seamless adhesive pressing
process parameters
seam strength
peel strength
