摘要
主镜筒是光学仪器上的重要零件,制件表面质量与配合精度要求高,不允许出现冷隔和裂纹等缺陷,同轴度与垂直度公差为0.01 mm。控制产品质量的关键是模具浇注及排溢系统的设计和压铸参数的设置。创新设计了环形进料的浇注与排溢系统,优化压铸工艺参数。使用ProCAST软件模拟主镜筒产品金属溶液充型及凝固过程。根据产品的结构特点设计了三个方向的抽芯机构,保证产品顺利脱模。
The main lens barrel is an important part of the optical instrument,the surface quality and matching accuracy of the workpiece are high,defects such as cold isolation and cracks are not allowed,and the tolerance of coaxiality and perpendicularity is 0.01 mm.The key to controlling product quality is the design of the mold pouring and overflow system and the setting of die casting parameters.The pouring and overflow system of annular feed is innovatively designed to optimize the die-casting process parameters.ProCAST software was used to simulate the metal solution filling and solidification process of the primary tube product.According to the structural characteristics of the product,the core-pulling mechanism in three directions is designed to ensure the smooth demoulding of the product.
作者
杜翠玲
方玉建
戴二林
吴仁庚
DU Cuiling;FANG Yujian;DAI Erlin;WU Rengeng(Intelligent Manufacturing college,Dongguan Technician college,Dongguan 523000,Guangdong China;Technology R&D Department,DongGuan Homay Hardware Co.,Ltd.,Dongguan 523000,Guangdong China)
出处
《中国铸造装备与技术》
CAS
2024年第5期80-85,共6页
China Foundry Machinery & Technology
关键词
压铸成型
浇注与排溢系统
模拟分析
环形进料
抽芯机构
Die casting
Pouring and drainage systems
Simulation analysis
Annular feeding
Core-pulling mechanism
