期刊文献+

重力场中铝热剂的燃烧特性研究 被引量:3

Study on Combustion Characteristics of a Thermit in the Gravitation Field
在线阅读 下载PDF
导出
摘要 研究了重力场作用下有液相生成的铝热剂的燃烧特性。研究了CaO ,CaF2 等添加剂以及预热温度对铝热剂燃烧温度和燃烧速率的影响。结果表明 ,在重力场作用下有液相生成的铝热剂的燃烧速率为反应产物熔体向未反应粉末中的渗透速率。提高预热温度可使燃烧温度升高 。 The combustion characteristics of the thermit in the presence of liquid phase in the field of gravitational forces were investigated. The effects of the additions such as CaO,CaF 2 on the combustion temperature and the combustion wave velocity were also investigated. It is found that the permeation velocity of molten reaction products to porous base is higher than that of the heat conductivity through the porous thermit. The combustion wave velocity is controlled by the permeation velocity. The combustion temperature and combustion wave velocity increases with increasing the preheating temperature.
出处 《粉末冶金技术》 CAS CSCD 北大核心 2001年第6期348-350,共3页 Powder Metallurgy Technology
关键词 铝热剂 燃烧 重力场 铝热反应 复合钢管 SHS thermit combustion gravitational field
  • 相关文献

参考文献3

二级参考文献5

  • 1段辉平.北京科技大学博士论文[M].,1996..
  • 2陈德和.不锈钢的组织与性能[M].北京:机械工业出版社,1977.176.
  • 3肖纪美,不锈钢的金用学问题(第2版),1983年,230页
  • 4陈德和,不锈钢的组织与性能,1977年,176页
  • 5段辉平,博士学位论文,1996年

共引文献17

同被引文献42

  • 1张衍诚,潘冶,张传.含稀释剂的Al-Cr_2O_3体系燃烧合成反应热力学分析与反应模型[J].中国工程科学,2004,6(6):63-67. 被引量:9
  • 2赵忠民,张龙,白鸿柏,郑坚,王建江.SHS制备纳米/微米结构抗弹陶瓷可行性研究[J].特种铸造及有色合金,2004,24(6):17-19. 被引量:6
  • 3赵忠民,张龙,王卫国,宋义刚.Al_2O_3/ZrO_2快速凝固复合陶瓷显微结构与力学行为[J].特种铸造及有色合金,2006,26(11):681-684. 被引量:7
  • 4LEE J H, YOSHIKAWA A, KAIDEN H, et al. Microstrueture of Y2O3 doped Al2O3/ZrO2 eutectic fibers grown by the micro-pullingdown method[J].Journal of Crystal Growth, 2001, 231 : 179-185.
  • 5LEE J H, YOSHIKAWA A, DURBIN S D, et al, Microstrue(ure of Al2O3/ZrO2 eutectic fibers grown by the micro-pulling-down method[J]. Journal of Crystal Growth, 2001, 222:791-796.
  • 6LLORCA J, ORERA V M. Directionally solidified eutectic ceramic oxides[J]. Progress in Materials Science, 2006, 51(6): 711-822.
  • 7PENA J I, MERINO R I, HARLAN N R, et al. Microstructure of Y2O3 doped Al2O3/ZrO2 eutectics grown by the laser floating zone method[J].J. Eur. Ceram. Soc. , 2002, 22:2 595-2 602.
  • 8LARREA A, DE LA FUENTE G F, MERIUO R l,et al. ZrO2- Al2O3 eutectic plates produced by laser zone mehing[J]. J. Eur. Ceram. Soc., 2002, 22: 191-198.
  • 9SAYIR A, FARMER S C. The effect of the microstructure on mechanical properties of directionatly solidified Al2O3/ZrO2 (Y2O3) eutectic[J]. Acta Mater. , 2000, 48:4 691-4 697.
  • 10ZHAO Z M, ZHANG L, ZHENG J, et al. Microstructure and mechanical properties of Al2O3/ZrO2 composite produced by combustion synthesis[J]. Scripta Materialia, 2005, 53:995-1 000.

引证文献3

二级引证文献4

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部