期刊文献+

商业化高效浅结Cz-Si太阳电池

COMMERCIAL SHALLOW EMITTERS Cz-Si SOLAR CELL WITH HIGH EFFICIENCY
原文传递
导出
摘要 采用轻掺杂、浅结工艺,将发射极方块电阻控制在60Ω/□,基于国产生产线的常规工艺,获得了平均效率为17.8%的商业化Cz-Si太阳电池。如果将发射极方块电阻控制在80Ω/□,结合密栅和新型浆料,产业化电池的平均效率可达18%。 Shallow emitters (60Ω/□) with a low doping concentration were adopted, and the sheet resistance is controlled to be 60Ω/□. Cz-Si solar cells are fabricated in the domestic production-line with regular process, and the average efficiency is found to be 17.8%. If the sheet resistance of the shallow emitters is increased to be 80Ω/□ and new sliver paste and tight-grid pattern are adopted, an average efficiency of 18% can be obtained.
出处 《太阳能学报》 EI CAS CSCD 北大核心 2012年第9期1480-1484,共5页 Acta Energiae Solaris Sinica
关键词 Cz—Si 太阳电池 高效 浅结 Cz-Si solar cell high efficiency shallow emitters
  • 相关文献

参考文献14

  • 1Luque A, Hegedu S. Handbook of photovohaic science and engineering[ M ]. West Sussex: John Wiley & Sons Ltd, 2003, 271-272.
  • 2Clugston D A, Basore P A. PCID version 5 : 32-bit solar cell modeling on personal computers [ A ]. 26th IEEE Photovoltaic Specialists Conference [ C ] , Anaheim, CA, 1997, 207-210.
  • 3Vazquez C, Alonso J, Vazquez M A, et al. Efficiency commercial Cz-Si solar cell with a shallow emitter [ J Materials Science and Engineering B, 2010, 172 (1 43-49.
  • 4Zhao J H. Recent advances of high-efficiency single crys- talline silicon solar cells in processing technologies and substrate materials [ J ]. Solar Energy Materials & Solar Cells, 2004, 82( 1 ) : 53-64.
  • 5赵雷,周春兰,李海玲,刁宏伟,王文静.单晶硅太阳电池发射极的模拟优化[J].太阳能学报,2009,30(12):1587-1591. 被引量:8
  • 6何堂贵,唐广.晶体硅太阳电池扩散气氛场均匀性研究[J].电子设计工程,2009,17(9):55-57. 被引量:14
  • 7Bentzen A, Schubert G, Christensen J S, et al. Influence of temperature during phosphorus emitter diffusion from a spray-on source in multicrystalline silicon solar cell pro- cessing [ J ]. Progress in Photovohaies: Research and Applications, 2007, 15(4) : 281-289.
  • 8Seong Je Jeon, Sang Man Koo, Seon Am Hwang. Optimi- zation of lead- and cadmium-free front contact silver paste formulation to achieve high fill factors for industrial screen-printed Si solar cells [ J ]. Solar Energy Materials & Solar Cells, 2009, 93(6-7) : 1103-1109.
  • 9胡伟民,洪垣,周斌.n^+/p常规硅太阳电池表面“死层”的减少方法[J].同济大学学报(自然科学版),1995,23(1):65-68. 被引量:7
  • 10Choulat Patrick, Duerinckx manuel, et al. Minimizing Filip, van Kerschaver Em- the dead layer of industrialphosphorous emitters formed by POC13 diffusion [ A ]. 15th International Photovoltaic Science & Engineering Conference( PVSEC-15 ) [ C ] , Shanghai, China, 2005, 184-185.

二级参考文献6

  • 1蔡世俊.硅高效太阳电池的效率限制[J].固体电子学研究与进展,1994,14(4):347-351. 被引量:2
  • 2Luque A, Hegedus S. Handbook of photovoltaic science and engineering[ M]. West Sussex: John Wiley & Sons Ltd, 2003, 271--272.
  • 3Zhao J H. Recent advances of high-efficiency single crystalline silicon solar cells in processing technologies and substrate materials[ J]. Solar Energy Materials & Solar Cells, 2004, 82 (1): 53-64.
  • 4Kaneko K, Landaud D, Gillon P. Cost estimates of silicon manufacture by metallurgy[ J]. Photovoltaics Bulletin, 2002, (12) : 8--10.
  • 5Clugston D A, Basore P A. PCID version 5: 32-bit solar cellmodeling on personal computers[A]. 26th IEEE Photovoltaic Specialists Conference [ C ]. Anaheim, CA, 1997, 207--210.
  • 6张凤鸣.多晶硅薄膜太阳电池[J].太阳能学报,2003,24(4):555-564. 被引量:21

共引文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部