期刊文献+

Al-Ti-C与Al-Ti-B晶粒细化剂的Zr中毒机理 被引量:27

Poisoning mechanism of Zr on grain refiner of Al-Ti-C and Al-Ti-B
在线阅读 下载PDF
导出
摘要 通过采用扫描电镜(SEM)、能谱仪(EDS)、X射线衍射(XRD)等对Al-Ti-Zr-C与Al-Ti-Zr-B试验合金中Al3Zr、Al3Ti、TiC或TiB2等第二相粒子结合情况的观察,研究晶粒细化剂的Zr中毒机理。结果表明:两种实验铝合金的凝固组织中Al3Zr均容易与Al3Ti结合形成聚积体,从而抑制了Al3Ti异质形核、细化晶粒的作用,出现所谓晶粒细化剂的Zr中毒现象;而TiC、TiB2粒子基本不与Al3Zr结合,但受Al3Zr的影响出现了团聚现象。根据边-边匹配晶体学模型(E2EM)计算表明:Al3Zr与Al3Ti、α-Ti具有多种可能的共格位向关系,而与TiC/TiB2粒子均只有一种可能的共格位向关系。母相-新相的共格位向关系的多少可作为晶粒细化剂设计的晶体学理论参考。 The poisoning mechanism of zirconium on the grain-refining efficiency of Al-Ti-C and Al-Ti-B based grain refiner was been studied by observing the phases distribution between Al3Zr,Al3Ti,TiC and TiB2 particles in the Al-Ti-Zr-C and/or Al-Ti-Zr-B alloys using X-ray diffraction(XRD) and scanning electron microscope(SEM) equipped with energy dispersive spectrometer(EDS).The results show that Al3Zr particles are easy to combine with Al3Ti particles both in Al-Ti-Zr-C and Al-Ti-Zr-B alloys,the potency of Al3Ti performed as nucleation centers is impaired and results in the poisoning phenomenon.While TiC and TiB2 particles seem not to integrate with Al3Zr particles though the agglomeration of TiB2 particles.The calculation results of edge-to-edge matching model(E2EM) indicate that Al3Zr has a better crystallographic matching with Al3Ti and α-Ti solute than it does with TiC and TiB2 particles,which implies the quantities of the orientation relationships(ORs) between the matrix and precipitate can be used as a crystallography theoretical consultation in designing grain refiner.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2012年第2期371-378,共8页 The Chinese Journal of Nonferrous Metals
基金 国家重点基础研究发展计划资助项目(2010CB731700)
关键词 晶粒细化剂 AL-TI-C AL-TI-B ZR 中毒机理 grain refiner Al-Ti-C Al-Ti-B Zr poisoning mechanism
  • 相关文献

参考文献24

  • 1MCCARTNEY D G.Grain refining of aluminium and its alloys using inoculants[J].International Materials Reviews,1989,34(5):247-260.
  • 2MURTY B S,KORI S A,CHAKRABORTY M.Grain refinement of aluminium and its alloys by heterogeneous nucleation and alloying[J].International Materials Reviews,2002,47(1):3-29.
  • 3JONES G,PEARSON J.Factors affecting the grain-refinement of aluminum using titanium and boron additives[J].Metallurgical and Materials Transactions B,1976,7(2):223-234.
  • 4BUNN A M,SCHUMACHER P,KEARNS M A,BOOTHROYD C B,GREER A L.Grain refinement by Al-Ti-B alloys in aluminium melts a study of the mechanisms of poisoning by zirconium[J].Materials Science and Technology,1999,15(10):1115-1123.
  • 5LI H,SRITHARAN T,SEOW H P.Grain refinement of DIN226 alloy at high titanium and boron inoculation levels[J].Scripta Materialia,1996,35(7):869-872.
  • 6ABDEL-HAMID A A,ZAID A I O.Poisoning of Grain Refinement of Some Aluminium Alloys[C] //MOHAMED F H,SAID M M.Current Advances in Mechanical Design and ProductionⅦ.Oxford:Pergamon,2000:331-338.
  • 7刘胜胆,张新明,陈明安,游江海,张小艳.Effect of Zr content on quench sensitivity of AlZnMgCu alloys[J].中国有色金属学会会刊:英文版,2007,17(4):787-792. 被引量:14
  • 8DING H M,LIU X F,YU L N.Influence of zirconium on grain refining efficiency of Al-Ti-C master alloys[J].Journal of Materials Science,2007,42(23):9817-9821.
  • 9ZHANG M X,KELLY P M.Edge-to-edge matching and its applications(PartⅠ).Application to the simple HCP/BCC system[J].Acta Materialia,2005,53(4):1073-1084.
  • 10ZHANG M X,KELLY P M.Edge-to-edge matching and its applications(PartⅡ).Application to Mg-Al,Mg-Y and Mg-Mn alloys[J].Acta Materialia,2005,53(4):1085-1096.

二级参考文献15

  • 1THOMPSON D S.Metallurgical factors affecting high strength aluminum alloy production[J].Metallurgical Transactions A,1975,A6:671-683.
  • 2ISKANDAR M,REYES D,GAXIOLA Y,FUDGE E,FOYOS J,LEE E W,KALU P,GARMESTANI H,OGREN J,ES-SAID O S.On identifying the most critical step in the sequence of heat treating operations in 7249 aluminum alloy[J].Engineering Failure Analysis,2003,10:199-207.
  • 3LIM S T,YUN S J,NAM S W.Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications[J].Mater Sci EngA,2004,371(1/2):82-90.
  • 4DESCHAMPS A,BRECHET C.Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu alloy[J].Scripta Materialia,1998,39(11):1517-1522.
  • 5DORWARD R C,BEERNTSEN D J.Grain structure and quench-rate effects on strength and toughness of AA7050Al-Zn-Mg-Cu-Zr alloy plate[J].Metallurgical and Materials Transactions A,1995,A26:2481-2484.
  • 6DUMONT D,DESCHAMPS A,BRECHET C.Characterization of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behavior[J].Materials Science and Technology,2004,20 (5):567-576.
  • 7ROBSON J D,PRANGNELL P B.Predicting the recrystallized volume fraction in AA7050 hot rolled plate[J].Material Science and Technology,2002,18(6):607-619.
  • 8ROMETSCH P A,SCHAFFER G B.An age hardening model for Al-7Si-Mg casting alloys[J].Mater Sci Eng A,2002,A325(1/2):424-432.
  • 9ENGLER O,SACHOT E,EHRSTROM J C.Recrystallisation and texture in hot deformed aluminium alloy 7010 thick plates[J].Materials Science and Technology,1996,12:717-729.
  • 10DESCHAMPS A,BRECHET C.Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy[J].Mater Sci Eng A,1998,A251:200-207.

共引文献13

同被引文献219

引证文献27

二级引证文献85

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部