期刊文献+

中低铝氧化物陶瓷低温烧结研究和烧结助剂的制备 被引量:1

A Study on Low-temperature Sintering Technology and Sintering Additive Preparation for the Mid-low Concentration Al2O3 Oxide Ceramics
在线阅读 下载PDF
导出
摘要 基于氧化物陶瓷低温烧结理论,针对中低铝陶瓷(Al2O318%~75%,SiO225%~82%)采用廉价添加物配制了一种低温烧结助剂,烧结助剂包括助熔剂和活化剂两部分。此烧结助剂节能效果显著,改良产品的主要性能均达到或优于原产品。并应用XRD与SEM等研究手段,对原产品和添加烧结助剂产品的微观结构进行对比分析,发现此烧结助剂对改善产品强度,韧性,微观结构,提高化学稳定性与热稳定性均起到较好效果。 A low temperature sintering additive which comprises flux and adds all coming from cheap stuffs was developed. The objective of this study is the Mid-Low Concentration Al2O3 ceramic. The content of Al2O3 is in the range of 18% - 75%; the content of SiO2 in the range of 25 % - 82%. This additive has remarkable energy saving effect. The performances of improved products all achieve or exceed those of former products. It is indicated on the microstructure by SEM and XRD that this low temperature additive has good effects on the product strength, fallibility, improving chemical stability and thermal stability. The additive showed a prospective future for industrial popularization.
出处 《工业加热》 CAS 2007年第1期43-47,共5页 Industrial Heating
关键词 中低铝氧化物 助熔 活化 液相烧结 mid-law aluminium oxide fluxing activation liquid phase sintering
  • 相关文献

参考文献12

  • 1ATKINSON H V,Theories of Normal Grain Growth in Pure Single Phase Systems[J].Acta Metal.1,1988(36):469.
  • 2SHI J L,GAO J H,LIN Z X,et al.Effect of Agglomerates in ZrO2 Powder Compacts on Mixrostructural Development[J],J.Maten Sci,1993(28):342.
  • 3LIN F J,DE JONGHE L C.Initial Coarsening and Microstructural Evolution of Fast-fired and MgO-doped Al2O3[J],J.Am.Ceram.Soc,1997(80):2891.
  • 4EINARSRUD M,HAGEN E,PETTERSEN G.Pressureless Sintering of Titanium Diboride with Nickel,Nickel Boride,and Icon,Additives[J].J.Am.Ceram.Soc,1997(80):3013.
  • 5HAMMER M,HOFFMANN M J.Sintering Model for mixedoxide-derived Lead Zirconate Titanate Ceramics[J],J.Am.Ceram.Soc.,1998(81):3277.
  • 6KUCZYNSKI G C.Self-diffusion in Sintering of Metallic Particles[J].Trans.AIME,1949(185):169.
  • 7KUCZYNSKI G C.Model Experiments and the Theory of Sintering[M].In:Somiya S,Moriyoshi Y(eds).Sintering.Key Papers,London:Elsevier Applied Science,1987.501.
  • 8K1NGERYW D.BERG M.Study of the Initial Stage of Sintering Solids by Viscous Flow,Evaporation-condensation,and Selfdiffusion[J].J Appl Phys,1955(26):1205.
  • 9李加驹.陶瓷工艺学(上册)[M].北京:中国轻工业出版社,1999.
  • 10SVOBODA J,RIEDEL H,GAEBEL R.A Model for Liquid Phase Sinering[J].Acta Mater,1995(44):3215.

二级参考文献46

  • 1苏雪筠,刘粤惠,陈楷.氧化铝瓷的显微结构与断裂韧性关系的研究[J].无机材料学报,1994,9(2):221-226. 被引量:8
  • 2陆章明.提高95瓷性能及低温烧成的途径[J].电子元件与材料,1995,14(4):13-17. 被引量:8
  • 3薛群基,刘惠文.陶瓷摩擦学Ⅱ.陶瓷材料的润滑[J].摩擦学学报,1996,16(2):184-190. 被引量:28
  • 4华南工学院 等.陶瓷工艺学[M].北京:中国建筑工业出版社,1990..
  • 5G. K.L.Goh.L.C.Lim.Effect of Grain Size on Behavior of Alumina Cutring Tools, Wetr, 1997.206:24 - 32.
  • 6Tetsuya Scmda, E. Yamda, M. Kaji. R. C. Bradt. Effect of graing Size on the Sliding Wear and friction almnina at Elevated temperature. J. Am. Cexam.Soc, 1999.82(6):1505 - 11.
  • 7S.J. Binnison.H.M. Chan. B. R.Lawn. Effect of heat treatment on crackresistance curves in a liquid - phase - sintered alumina. J. Am. Ceram.Soc. 1989.72:677 - 79.
  • 8M. Terheci. Grain Boundary and tesing procedure: a new approach to tribology of alumina material, Wear, 1997.211 (2) :289 - 301.
  • 9P. Chantikul, S. J. Bennison. B. R. Lawn. Role d grain Size in the strength and R- Curve Propexlies of Almnina,J. Am. Ceram. Soc, 1990.73:2419-27.
  • 10M.I. Peteson.T.Y.Tien. Effect of the grain boundar thermal expansion coefficient on the fracture toughness in silicon nitride.J. Am. Cemm. Soc,1995.78:2345-52.

共引文献3

同被引文献39

引证文献1

二级引证文献45

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部