期刊文献+

添加剂对MgTiO_3陶瓷性能的影响 被引量:8

Effects of Additives on MgTiO_3 Properties
在线阅读 下载PDF
导出
摘要 研究了H3BO3,CaO-SiO2-B2O3玻璃料及V2O5的添加对MgTiO3陶瓷的烧结和介电性能的影响,并对影响机理作了初步探讨。结果表明:合适的添加剂能够使MgTiO3陶瓷在1240~1300℃之间烧结;添加质量分数为3%的H3BO3,V2O5或1%的CaO-SiO2-B2O3玻璃料的MgTiO3陶瓷的介电常数分别为20.8,17.5和19.8,在5~20MHz下,介电损耗低,多为10-4数量级;在10kHz下,介电常数的温度系数在-66×10-6/℃左右,是一种性能良好的微波介质材料。 The influence of the additives such as H3BO3, CaO-SiO2-B2O3 frit and V2O5 on sintering and dielectric properties of MgTiO3 ceramics was investigated, and the mechanism was also discussed. The results show that MgTiO3 ceramics with proper additives can be sintered between 1260℃ and 1280℃. The dielectric constant of MgTiO3 ceramics with 3wt% H3BO3, V2O5 or lwt% CaO-SiO2-B2O3 frit is 20.8, 17.5 and 19.8 respectively. The dielectric loss is low about 10^-4 between 5MHz and 20 MHz.The temperature coefficient at 10kHz is about -66×10^-6/℃ .The material has good dielectric properties,which can be used as microwave dielectric material.
出处 《硅酸盐通报》 CAS CSCD 北大核心 2005年第4期24-26,30,共4页 Bulletin of the Chinese Ceramic Society
关键词 钛酸镁 烧结温度 介电性能 MGTIO3 陶瓷性能 添加剂 H3BO3 微波介质材料 V2O5 介电常数 MgTiO3 sintering temperature dielectric property
  • 相关文献

参考文献6

二级参考文献12

  • 1徐延献.电子陶瓷材料[M].天津:天津大学出版社,1993..
  • 2Ferrieira V M,Azough F,FreerR,et al.J, Mater[].Resource.1997
  • 3Hill G J,Pells G P,Barnett M A. Radiation Effects Letters . 1986
  • 4Layden G K,Mcquarrie M C. J. Journal of the American Ceramic Society . 1959
  • 5Sato Takuro,et al. Japanese Journal of Applied Physics . 1981
  • 6Baek Jong-Gab,et al. Solid State Ionics . 1996
  • 7Wakino K,Nishikawa Y,Tamura H. Brit. Ceram. Trans. J . 1990
  • 8Subba Rao T,Murthu V R K,Viswanathan B. Ferroelectrics . 1990
  • 9Ferreira V M,et al. Journal of Materials Science . 1993
  • 10Ferrieira V M,Azough F,Baptista J L,et al. Ferroelectrics . 1992

共引文献48

同被引文献79

引证文献8

二级引证文献20

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部