Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop mor...Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.展开更多
The microwave wireless power transmission technologies for space solar power station are a crucial field in the international space sector,where various countries are competing in its development.This paper surveys th...The microwave wireless power transmission technologies for space solar power station are a crucial field in the international space sector,where various countries are competing in its development.This paper surveys the research experiments and development efforts related to space solar power stations and microwave wireless power transmission technologies worldwide.The objective is to assess the progress and current state of this technological foundation,determine the necessary focus for developing high-power microwave wireless power transmission technology,and provide clarity on the direction of future technology development in these areas.Finally,a distributed space solar power station plan that is immediately feasible is proposed.展开更多
Real-time water-medium endoscopic images can assist doctors in performing operations such as tissue cleaning and nucleus pulpous removal.During medical operating procedures,it is inevitable that tissue particles,debri...Real-time water-medium endoscopic images can assist doctors in performing operations such as tissue cleaning and nucleus pulpous removal.During medical operating procedures,it is inevitable that tissue particles,debris and other contaminants will be suspended within the viewing area,resulting in blurred images and the loss of surface details in biological tissues.Currently,few studies have focused on enhancing such endoscopic images.This paper proposes a water-medium endoscopic image processing method based on dual transmittance in accordance with the imaging characteristics of spinal endoscopy.By establishing an underwater imaging model for spinal endoscopy,we estimate the transmittance of the endoscopic images based on the boundary constraints and local image contrast.The two transmittances are then fused and combined with transmittance maps and ambient light estimations to restore the images before attenuation,ultimately enhancing the details and texture of the images.Experiments comparing classical image enhancement algorithms demonstrate that the proposed algorithm could effectively improve the quality of spinal endoscopic images.展开更多
Metasurfaces offer exceptional capabilities for controlling electromagnetic waves,enabling the realization of unique electromagnetic properties.As communication technology continues to evolve,metasurfaces present prom...Metasurfaces offer exceptional capabilities for controlling electromagnetic waves,enabling the realization of unique electromagnetic properties.As communication technology continues to evolve,metasurfaces present promising applications in wireless communications.This paper reviews the latest advancements in metasurface research within the communication sector,explores metasurface-based wireless relay technologies,and summarizes various wireless communication methods employing different types of metasurfaces across diverse modulation schemes.This paper provides a detailed discussion on the design of wireless communication systems based on coding metasurfaces to simplify transmitter architecture,as well as the development of intelligent coding metasurfaces in the communication field.It also elaborates on the application of vector vortex light fields in metasurface communication.Finally,it offers a forward-looking perspective on wireless communication systems that incorporate coded metasurfaces.This review aims to furnish researchers with a thorough understanding of the current state and future directions of coded metasurface applications in communications.展开更多
The migratory nature of avian species is well known not only to researchers but also to the general public,becoming engrained in cultural traditions and even children's fairy tales.However,our understanding of the...The migratory nature of avian species is well known not only to researchers but also to the general public,becoming engrained in cultural traditions and even children's fairy tales.However,our understanding of these charismatic behaviors made great strides in the 1990s with the advent of small,light-weighted satellite transmitters capable of longterm tracking(Argos,2016).The emergence of this new technology made it possible to track a broader range of species at higher resolution than ever before.In turn,this data enabled detailed understanding of individual avian behavior and habitats,including transboundary migration routes.展开更多
We synthesized tungsten-doped vanadium dioxide(W-VO_(2))particles via a one-step hydrothermal method,followed by their integration with antimony-doped tin oxide(ATO)nanoparticles to formulate a composite coating.Subse...We synthesized tungsten-doped vanadium dioxide(W-VO_(2))particles via a one-step hydrothermal method,followed by their integration with antimony-doped tin oxide(ATO)nanoparticles to formulate a composite coating.Subsequently,the VO_(2)/ATO composite coating was fabricated through a spin-coating process.The impact of varying W-VO_(2) content and coating thickness on the performance of the composite coatings was systematically investigated by employing X-ray diffraction,particle size distribution analysis,spectrometry,and other pertinent test methodologies.Our findings revealed that an escalation in both W-VO_(2) content and coating thickness retained high transmittance in the near-infrared band at lower temperatures.However,as the temperature increased,a notable reduction in transmittance in the near-infrared band was observed,alongside a slight decrease in transmittance within the visible band.Remarkably,when the W-VO_(2) content reached 5%and the coating thickness was 1253 nm,the transmittance of the composite coating surpassed 80%.Furthermore,the heat insulation effect achieved a remarkable 10.0℃increase.Consequently,the synthesized composite coating demonstrates significant potential for smart glass applications,particularly in the realm of heat-insulating glass.展开更多
This paper presents a 4-level pulse amplitude modulation(PAM-4)distributed feedback(DFB)laser driver.The driver adopts a digital slicing architecture to achieve high linearity by adjusting the weights of three thermom...This paper presents a 4-level pulse amplitude modulation(PAM-4)distributed feedback(DFB)laser driver.The driver adopts a digital slicing architecture to achieve high linearity by adjusting the weights of three thermometer-coded main paths.An efficient-biased output stage structure is proposed to reduce power consumption while avoiding the degradation of out-put node bandwidth typically induced by parasitic capacitance in high-current bias path.A two-tap linear and nonlinear feed-for-ward equalizer(FFE)is implemented in the digital domain to extend bandwidth limitations and compensate for the dynamic nonlinearity of the DFB laser.The nonlinear FFE is realized at the cost of lower power consumption and smaller area by utiliz-ing the simultaneity of low-speed parallel data.The chip is fabricated in 28 nm CMOS process.Measurement results indicate that,with a laser bias current of 40 mA,a modulation current of 20 mApp,and an operating rate of 32 Gb/s PAM-4,the overall power consumption of the chip is 372 mW,corresponding to an energy efficiency of 11.6 pJ/b.展开更多
Imaging detector arrays have been widely used in terahertz(THz)astronomical observations,where optical filters play an important role.In this work,a 5-THz metal-mesh bandpass filter(MMBF)using cross-slot-shaped resona...Imaging detector arrays have been widely used in terahertz(THz)astronomical observations,where optical filters play an important role.In this work,a 5-THz metal-mesh bandpass filter(MMBF)using cross-slot-shaped resonators is developed and fabricated on Mylar film through photolithography.Extensive simulations,accounting for factors such as Mylar film loss,surface conductivity,corner errors,and surface roughness,were conducted to assess their impact on the filter’s performance.The measured characteristics,including a center frequency of 5.06 THz,a transmittance of 62%,and a 3-dB fractional bandwidth(FBW)is 38%,obtained via Fourier-transform infrared spectroscopy(FTIR),closely match the simulation results.This scalable metal-mesh filter shows promise for future THz astronomical applications.展开更多
A novel fabrication process related to a smoothly wet chemical etching profile o f InP-based epitaxial layers in the crystal direction of [01for an InP-based monol ithic vertically integrated transmitter with an M...A novel fabrication process related to a smoothly wet chemical etching profile o f InP-based epitaxial layers in the crystal direction of [01for an InP-based monol ithic vertically integrated transmitter with an MQW laser diode and a heterojunction bipolar tran sistors driver circuit is described.A clear eye output diagram via an O/E converter is demonstrat ed und er a 1.25Gb/s non-return-zero pseudorandom code with a pattern length of 2 the integrated transmitter has a power dissipation of about 120mW with an optical output of 2dBm.展开更多
We developed a novel cement evaluation logging tool,named the azimuthally acoustic bond tool（AABT）,which uses a phased-arc array transmitter with azimuthal detection capability.We combined numerical simulations and ...We developed a novel cement evaluation logging tool,named the azimuthally acoustic bond tool（AABT）,which uses a phased-arc array transmitter with azimuthal detection capability.We combined numerical simulations and field tests to verify the AABT tool.The numerical simulation results showed that the radiation direction of the subarray corresponding to the maximum amplitude of the first arrival matches the azimuth of the channeling when it is behind the casing.With larger channeling size in the circumferential direction,the amplitude difference of the casing wave at different azimuths becomes more evident.The test results showed that the AABT can accurately locate the casing collars and evaluate the cement bond quality with azimuthal resolution at the casing-cement interface,and can visualize the size,depth,and azimuth of channeling.In the case of good casingcement bonding,the AABT can further evaluate the cement bond quality at the cementformation interface with azimuthal resolution by using the amplitude map and the velocity of the formation wave.展开更多
The Malkmus band model has been widely used in remote sensing and climate studies. However, its accuracy is not high. To solve this problem, a modified Malkmus band model was proposed by introducing a correction item....The Malkmus band model has been widely used in remote sensing and climate studies. However, its accuracy is not high. To solve this problem, a modified Malkmus band model was proposed by introducing a correction item. The HITRAN (High-resolution TRANsmission) 2008 database and the atmospheric models provided by the Air Force Geophysics Laboratory (AFGL) were used to calculate the molecular transmittances. By fitting the calculated transmittances to those by MODTRAN (MODerate resolution atmospheric TRANsmission) package with the least-squares method, the fitting coefficients of the correction item were obtained under different atmosphere models. The experimental results show that the root mean square errors (RMSE) of the modified model are significantly less than that of the traditional Malkmus band model by 1-2 orders of magnitude. In addition, the modified method is suitable for different atmospheric models and molecules.展开更多
[Objective] To explore a method for the rapid determination of protein con- tent in grains of Panicum miliaceum L. [Method] The near infrared transmittance spec- troscopy （NITS） was used to build the mathematical mo...[Objective] To explore a method for the rapid determination of protein con- tent in grains of Panicum miliaceum L. [Method] The near infrared transmittance spec- troscopy （NITS） was used to build the mathematical models for the quantitative analy- sis of protein content in the grains. Four combinations of treatment that first derivative and second derivative were respectively combined with partial least squares （PLS） and modified partial least squares （MPLS） were set to compare their effects on the original transmission spectrum. [Result] The predicting effects of the 4 combinations were similar. The optimal combination was first derivative with MPLS, in which the average determination coefficient of validation （RSQ） was 0.880 6, correlation coeffi- cient of cross validation （1-VR） was 0.857 0, standard error of calibration （SEC） was 0.342 4, standard error of cross validation （SECV） was 0.375 1, and the standard er- ror of prediction （SEP） was 0.454. [Conclusion] The constructed NITS model is a rapid way for the determination of protein content in grains of P. miliaceum.展开更多
Aiming at the specific protocol of RFID technology,a 915MHz CMOS transmitter front-end for OOK modulation is implemented in a 0.18μm CMOS process. The transmitter incorporates a class-E power amplifier （PA）, a modu...Aiming at the specific protocol of RFID technology,a 915MHz CMOS transmitter front-end for OOK modulation is implemented in a 0.18μm CMOS process. The transmitter incorporates a class-E power amplifier （PA）, a modulator, and a control logic unit. The direct-conversion architecture minimizes the required on-and-off-chip components and provides a low-cost and efficient solution. A novel structure is proposed to provide the modulation depth of 100% and 18% ,respectively. The PA presents an output ldB power of 17.6dBm while maintaining a maximum PAE of 35.4%.展开更多
2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includ...2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.展开更多
A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodiffere...A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodifferential stacked class-A power amplifier using the current reuse technique is proposed to save power. The transmitter mainly includes two parts： a 20MHz ASK modulator based on a constant amplitude phase lock loop （PLL） and a direct up-conversion RF circuit. This design, implemented in a TSMC 0.25μm CMOS process, achieves a - 23. 217dBm output power with a data rate of 1Mbps and dissipates 3.17mA of current with a single 2.5V power supply.展开更多
To investigate whether the protective effects of puerarine （Pur） against cerebral ischemia is associated with depressing the extracellular levels of amino acid transmitters in brain of rats. Methods Male Sprague-Daw...To investigate whether the protective effects of puerarine （Pur） against cerebral ischemia is associated with depressing the extracellular levels of amino acid transmitters in brain of rats. Methods Male Sprague-Dawley rats were subjected to transient middle cerebral artery occlusion （MCAO） for 60 min followed by 24 h reperfusion. Put （50, 100 mg/kg, i.p.） was administered at the onset of MCAO. The infarct rate and edema rate were detected on TTC （2,3,5-triphenyltetrazolium chloride）-stained coronal sections. The extracellular levels of amino acid transmitters were monitored in striatum of rats with ischemic/reperfusion injury using in vivo microdialysis technique. Furthermore, the protective effects of Pur against glutamate-induced neurotoxicity were detected. Glutamate-induced apoptotic and necrotic cells in hippocampus were estimated by flow cytometric analysis of Annexin-V and PI labeling cells. Results Pur （100 mg/kg） significantly decreased infarct size by 31.6% （P〈0.05）, reduced edema volume （P〈0.05）, and improved neurological functions （P〈0.05） following MCAO. In these rats, the ischemia-induced extracellular levels of aspartate （Asp）, glutamate （Glu）, γ-aminobutyric acid （GABA）, and taurine （Tau） were significantly reduced in striatum of vehicle-treated animals by 54.7%, 56.7%, 75.8%, and 68.1% （P〈0.01 and P〈0.05）. Pur reduced the peak values of Glu and Asp more obviously than those of GABA and Tau, and the rate of Glu/GABA during MCAO markedly decreased in Pur-treated MCAO rats, compared with the vehicle-treated MCAO rats. Meanwhile, apoptosis and necrosis induced by Glu in cultured hippocampal neurons were significantly reduced after Pur treatment. Conclusion Acute treatment with Put at the onset of occlusion significantly depresses ischemia-induced efflux of amino acids, especially, excitotoxicity in the striatum, a mechanism underlying the neuroprotective effect on cellular survival.展开更多
A rational plant population is an important attribute to high yield of cotton, because it can provide a beneficial micro environment within the canopy for plant growth and development as well as yield formation. A 2-y...A rational plant population is an important attribute to high yield of cotton, because it can provide a beneficial micro environment within the canopy for plant growth and development as well as yield formation. A 2-yr field experiment was conducted to determine the optimal plant density based on cotton yield in relation to the canopy micro environment （canopy temperature, relative humidity and light transmittance）. Six plant densities （1.2-5.7 plants m^-2） were arranged with a completely randomized block design. The highest cotton yield （1 507 kg ha^-1） was obtained at 3.0 plants m^-2 due to more bolls per unit ground area （79 bolls m2）, while the lowest yield （1 091 kg ha1） was obtained at 1.2 plants m^-2. Under the moderate plant density （3.0 plants m^-2）, there was a lower mean daily temperature （MDT, 27. 1℃） attributing to medium daily minimum temperature （Train, 21.9℃） and the lowest daily maximum temperature （Tmax, 35.8℃）, a moderate mean canopy light transmittance of 0.51, and lower mean daily relative humidity （MRH） of 79.7% from June to October. The results suggest that 3.0 plants m^-2 would be the optimal plant density because it provides a better canopy micro environment.展开更多
基金supported by the Biological Breeding-National Science and Technology Major Project(2023ZD0403305)National Natural Science Foundation of China(32101845)+1 种基金the National Key Research and Development Program of China(2023YFE0105000)the China Agriculture Research System(CARS-04).
文摘Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.
基金Entrusted Fund of National Institute of Information and Communications Technology(NICT),Japan(JPJ012368C02401)。
文摘The microwave wireless power transmission technologies for space solar power station are a crucial field in the international space sector,where various countries are competing in its development.This paper surveys the research experiments and development efforts related to space solar power stations and microwave wireless power transmission technologies worldwide.The objective is to assess the progress and current state of this technological foundation,determine the necessary focus for developing high-power microwave wireless power transmission technology,and provide clarity on the direction of future technology development in these areas.Finally,a distributed space solar power station plan that is immediately feasible is proposed.
文摘Real-time water-medium endoscopic images can assist doctors in performing operations such as tissue cleaning and nucleus pulpous removal.During medical operating procedures,it is inevitable that tissue particles,debris and other contaminants will be suspended within the viewing area,resulting in blurred images and the loss of surface details in biological tissues.Currently,few studies have focused on enhancing such endoscopic images.This paper proposes a water-medium endoscopic image processing method based on dual transmittance in accordance with the imaging characteristics of spinal endoscopy.By establishing an underwater imaging model for spinal endoscopy,we estimate the transmittance of the endoscopic images based on the boundary constraints and local image contrast.The two transmittances are then fused and combined with transmittance maps and ambient light estimations to restore the images before attenuation,ultimately enhancing the details and texture of the images.Experiments comparing classical image enhancement algorithms demonstrate that the proposed algorithm could effectively improve the quality of spinal endoscopic images.
基金supported in part by National Natural Science Foundation of China(U24A20307 and 62175224)in part by the science and technology innovation leading talent project of special support plan for high-level talents in Zhejiang Province(2021R52032)+2 种基金in part by the China Jiliang University Basic Research ExpensesZhejiang University Students Science and Technology Innovation Activity Plan-New Talent Plan(2024R409C054)in part by the Natural Science Foundation of Zhejiang Province under Grant(ZCLZ25F0502).
文摘Metasurfaces offer exceptional capabilities for controlling electromagnetic waves,enabling the realization of unique electromagnetic properties.As communication technology continues to evolve,metasurfaces present promising applications in wireless communications.This paper reviews the latest advancements in metasurface research within the communication sector,explores metasurface-based wireless relay technologies,and summarizes various wireless communication methods employing different types of metasurfaces across diverse modulation schemes.This paper provides a detailed discussion on the design of wireless communication systems based on coding metasurfaces to simplify transmitter architecture,as well as the development of intelligent coding metasurfaces in the communication field.It also elaborates on the application of vector vortex light fields in metasurface communication.Finally,it offers a forward-looking perspective on wireless communication systems that incorporate coded metasurfaces.This review aims to furnish researchers with a thorough understanding of the current state and future directions of coded metasurface applications in communications.
文摘The migratory nature of avian species is well known not only to researchers but also to the general public,becoming engrained in cultural traditions and even children's fairy tales.However,our understanding of these charismatic behaviors made great strides in the 1990s with the advent of small,light-weighted satellite transmitters capable of longterm tracking(Argos,2016).The emergence of this new technology made it possible to track a broader range of species at higher resolution than ever before.In turn,this data enabled detailed understanding of individual avian behavior and habitats,including transboundary migration routes.
基金Funded by Beijing Municipal Science&Technology Commission,Administrative Commission of Zhongguancun Science Park(No.Z221100006722022)。
文摘We synthesized tungsten-doped vanadium dioxide(W-VO_(2))particles via a one-step hydrothermal method,followed by their integration with antimony-doped tin oxide(ATO)nanoparticles to formulate a composite coating.Subsequently,the VO_(2)/ATO composite coating was fabricated through a spin-coating process.The impact of varying W-VO_(2) content and coating thickness on the performance of the composite coatings was systematically investigated by employing X-ray diffraction,particle size distribution analysis,spectrometry,and other pertinent test methodologies.Our findings revealed that an escalation in both W-VO_(2) content and coating thickness retained high transmittance in the near-infrared band at lower temperatures.However,as the temperature increased,a notable reduction in transmittance in the near-infrared band was observed,alongside a slight decrease in transmittance within the visible band.Remarkably,when the W-VO_(2) content reached 5%and the coating thickness was 1253 nm,the transmittance of the composite coating surpassed 80%.Furthermore,the heat insulation effect achieved a remarkable 10.0℃increase.Consequently,the synthesized composite coating demonstrates significant potential for smart glass applications,particularly in the realm of heat-insulating glass.
基金supported in part by Beijing Natural Science Foundation(Grant No.L247013)in part by the National Natural Science Foundation of China(Grant No.92373209)+1 种基金in part by Grant from the Chinese Academy of Sciences(Grant No.ZDBS-LY-JSC008)in part by Xiamen major science and technology project(Grant No.3502Z20221003).
文摘This paper presents a 4-level pulse amplitude modulation(PAM-4)distributed feedback(DFB)laser driver.The driver adopts a digital slicing architecture to achieve high linearity by adjusting the weights of three thermometer-coded main paths.An efficient-biased output stage structure is proposed to reduce power consumption while avoiding the degradation of out-put node bandwidth typically induced by parasitic capacitance in high-current bias path.A two-tap linear and nonlinear feed-for-ward equalizer(FFE)is implemented in the digital domain to extend bandwidth limitations and compensate for the dynamic nonlinearity of the DFB laser.The nonlinear FFE is realized at the cost of lower power consumption and smaller area by utiliz-ing the simultaneity of low-speed parallel data.The chip is fabricated in 28 nm CMOS process.Measurement results indicate that,with a laser bias current of 40 mA,a modulation current of 20 mApp,and an operating rate of 32 Gb/s PAM-4,the overall power consumption of the chip is 372 mW,corresponding to an energy efficiency of 11.6 pJ/b.
基金supported in part by the National Key Research and Development Program of China(Grant No.2023YFA1608200)the National Natural Science Foundation of China(Grant No.12020101002)+1 种基金the Fund from the Chinese Academy of Sciences(Grant No.PTYQ2024BJ0010)supported by the Shanghai Institute of Microsystem and Information Technology。
文摘Imaging detector arrays have been widely used in terahertz(THz)astronomical observations,where optical filters play an important role.In this work,a 5-THz metal-mesh bandpass filter(MMBF)using cross-slot-shaped resonators is developed and fabricated on Mylar film through photolithography.Extensive simulations,accounting for factors such as Mylar film loss,surface conductivity,corner errors,and surface roughness,were conducted to assess their impact on the filter’s performance.The measured characteristics,including a center frequency of 5.06 THz,a transmittance of 62%,and a 3-dB fractional bandwidth(FBW)is 38%,obtained via Fourier-transform infrared spectroscopy(FTIR),closely match the simulation results.This scalable metal-mesh filter shows promise for future THz astronomical applications.
文摘A novel fabrication process related to a smoothly wet chemical etching profile o f InP-based epitaxial layers in the crystal direction of [01for an InP-based monol ithic vertically integrated transmitter with an MQW laser diode and a heterojunction bipolar tran sistors driver circuit is described.A clear eye output diagram via an O/E converter is demonstrat ed und er a 1.25Gb/s non-return-zero pseudorandom code with a pattern length of 2 the integrated transmitter has a power dissipation of about 120mW with an optical output of 2dBm.
基金supported by the National Natural Science Foundation of China(Nos.11204380,11374371,61102102,and11134011)National Science and Technology Major Project(No.2011ZX05020-009)+1 种基金China National Petroleum Corporation(Nos.2014B-4011,2014D-4105,and 2014A-3912)PetroChina Innovation Foundation(No.2014D-5006-0307)
文摘We developed a novel cement evaluation logging tool,named the azimuthally acoustic bond tool（AABT）,which uses a phased-arc array transmitter with azimuthal detection capability.We combined numerical simulations and field tests to verify the AABT tool.The numerical simulation results showed that the radiation direction of the subarray corresponding to the maximum amplitude of the first arrival matches the azimuth of the channeling when it is behind the casing.With larger channeling size in the circumferential direction,the amplitude difference of the casing wave at different azimuths becomes more evident.The test results showed that the AABT can accurately locate the casing collars and evaluate the cement bond quality with azimuthal resolution at the casing-cement interface,and can visualize the size,depth,and azimuth of channeling.In the case of good casingcement bonding,the AABT can further evaluate the cement bond quality at the cementformation interface with azimuthal resolution by using the amplitude map and the velocity of the formation wave.
基金Projects(U1231105,41404013)supported by the National Natural Science Foundation of ChinaProject(2012AA121301)supported by the National Hi-tech Research and Development Program of China
文摘The Malkmus band model has been widely used in remote sensing and climate studies. However, its accuracy is not high. To solve this problem, a modified Malkmus band model was proposed by introducing a correction item. The HITRAN (High-resolution TRANsmission) 2008 database and the atmospheric models provided by the Air Force Geophysics Laboratory (AFGL) were used to calculate the molecular transmittances. By fitting the calculated transmittances to those by MODTRAN (MODerate resolution atmospheric TRANsmission) package with the least-squares method, the fitting coefficients of the correction item were obtained under different atmosphere models. The experimental results show that the root mean square errors (RMSE) of the modified model are significantly less than that of the traditional Malkmus band model by 1-2 orders of magnitude. In addition, the modified method is suitable for different atmospheric models and molecules.
基金Supported by the National Key Technology R&D Program of China (2006BAD02B07)the National Mordern Agricultural Industry System of China(CARS-07-12.5-A12)~~
文摘[Objective] To explore a method for the rapid determination of protein con- tent in grains of Panicum miliaceum L. [Method] The near infrared transmittance spec- troscopy （NITS） was used to build the mathematical models for the quantitative analy- sis of protein content in the grains. Four combinations of treatment that first derivative and second derivative were respectively combined with partial least squares （PLS） and modified partial least squares （MPLS） were set to compare their effects on the original transmission spectrum. [Result] The predicting effects of the 4 combinations were similar. The optimal combination was first derivative with MPLS, in which the average determination coefficient of validation （RSQ） was 0.880 6, correlation coeffi- cient of cross validation （1-VR） was 0.857 0, standard error of calibration （SEC） was 0.342 4, standard error of cross validation （SECV） was 0.375 1, and the standard er- ror of prediction （SEP） was 0.454. [Conclusion] The constructed NITS model is a rapid way for the determination of protein content in grains of P. miliaceum.
文摘Aiming at the specific protocol of RFID technology,a 915MHz CMOS transmitter front-end for OOK modulation is implemented in a 0.18μm CMOS process. The transmitter incorporates a class-E power amplifier （PA）, a modulator, and a control logic unit. The direct-conversion architecture minimizes the required on-and-off-chip components and provides a low-cost and efficient solution. A novel structure is proposed to provide the modulation depth of 100% and 18% ,respectively. The PA presents an output ldB power of 17.6dBm while maintaining a maximum PAE of 35.4%.
基金The National High Technology Research and Develop-ment Program of China (863 Program) (No.2001AA312010).
文摘2.5 Gbit/s monolithic integrated circuits （ICs） for optical fiber transmitter and receiver in 0.35 μm CMOS （complementary metal-oxide-semiconductor transistor） process are presented. The transmitter, which includes a 4： 1 multiplexer and a laser diode driver （LDD）, has four 622 Mbit/s random signals as its inputs and gets a 2.5 Gbit/s driving signal as its output; the receiver detects a 2.5 Gbit/s random signal and gets four 622 Mbit/s signals at the output. The main circuits include a trans-impedance amplifier （TIA）, a limiting amplifier, a clock and data recovery （CDR） unit, and a 1： 4 demultiplexer （DEMUX）. Test results prove the logic functions of the transmitter to be right, and the 10% to 90% rise and fall times of transmitter＇s output data eye diagram are 211.1 ps and 200 ps, respectively. The sensitivity of the receiver is measured to be better than 20 mV. The root mean square jitter of the DEMUX＇s output data is 15.6 ps and that of the clock after 1： 4 frequency dividing is 1.9 ps. Two chips are both applicable to 2.5 Gbit/s optical fiber communication systems.
文摘A 2.4GHz ASK transmitter suitable for a low power wireless capsule endoscope system is presented. A mixer-based frequency up-conversion transmitter architecture is employed to achieve a high data rate. A pseudodifferential stacked class-A power amplifier using the current reuse technique is proposed to save power. The transmitter mainly includes two parts： a 20MHz ASK modulator based on a constant amplitude phase lock loop （PLL） and a direct up-conversion RF circuit. This design, implemented in a TSMC 0.25μm CMOS process, achieves a - 23. 217dBm output power with a data rate of 1Mbps and dissipates 3.17mA of current with a single 2.5V power supply.
基金This study was supported by the Natural Science Foundation of Zhejiang Province (No. M303042)the Key Laboratory for Biomedical Engineering of Ministry of Education of China.
文摘To investigate whether the protective effects of puerarine （Pur） against cerebral ischemia is associated with depressing the extracellular levels of amino acid transmitters in brain of rats. Methods Male Sprague-Dawley rats were subjected to transient middle cerebral artery occlusion （MCAO） for 60 min followed by 24 h reperfusion. Put （50, 100 mg/kg, i.p.） was administered at the onset of MCAO. The infarct rate and edema rate were detected on TTC （2,3,5-triphenyltetrazolium chloride）-stained coronal sections. The extracellular levels of amino acid transmitters were monitored in striatum of rats with ischemic/reperfusion injury using in vivo microdialysis technique. Furthermore, the protective effects of Pur against glutamate-induced neurotoxicity were detected. Glutamate-induced apoptotic and necrotic cells in hippocampus were estimated by flow cytometric analysis of Annexin-V and PI labeling cells. Results Pur （100 mg/kg） significantly decreased infarct size by 31.6% （P〈0.05）, reduced edema volume （P〈0.05）, and improved neurological functions （P〈0.05） following MCAO. In these rats, the ischemia-induced extracellular levels of aspartate （Asp）, glutamate （Glu）, γ-aminobutyric acid （GABA）, and taurine （Tau） were significantly reduced in striatum of vehicle-treated animals by 54.7%, 56.7%, 75.8%, and 68.1% （P〈0.01 and P〈0.05）. Pur reduced the peak values of Glu and Asp more obviously than those of GABA and Tau, and the rate of Glu/GABA during MCAO markedly decreased in Pur-treated MCAO rats, compared with the vehicle-treated MCAO rats. Meanwhile, apoptosis and necrosis induced by Glu in cultured hippocampal neurons were significantly reduced after Pur treatment. Conclusion Acute treatment with Put at the onset of occlusion significantly depresses ischemia-induced efflux of amino acids, especially, excitotoxicity in the striatum, a mechanism underlying the neuroprotective effect on cellular survival.
基金supported by Special Fund for Agro-scientific Research in the Public Interest,China(3-5-19)the Modern Agro-Industry Technology Research System,China(Cotton 2007-2010)the National Transgenic Cotton Production Program,China(2009ZX08013-014B)
文摘A rational plant population is an important attribute to high yield of cotton, because it can provide a beneficial micro environment within the canopy for plant growth and development as well as yield formation. A 2-yr field experiment was conducted to determine the optimal plant density based on cotton yield in relation to the canopy micro environment （canopy temperature, relative humidity and light transmittance）. Six plant densities （1.2-5.7 plants m^-2） were arranged with a completely randomized block design. The highest cotton yield （1 507 kg ha^-1） was obtained at 3.0 plants m^-2 due to more bolls per unit ground area （79 bolls m2）, while the lowest yield （1 091 kg ha1） was obtained at 1.2 plants m^-2. Under the moderate plant density （3.0 plants m^-2）, there was a lower mean daily temperature （MDT, 27. 1℃） attributing to medium daily minimum temperature （Train, 21.9℃） and the lowest daily maximum temperature （Tmax, 35.8℃）, a moderate mean canopy light transmittance of 0.51, and lower mean daily relative humidity （MRH） of 79.7% from June to October. The results suggest that 3.0 plants m^-2 would be the optimal plant density because it provides a better canopy micro environment.
