A novel process which can purify the organic solvents from their azeotropes with water is proposed. In this process,water can be drained off both from bottom and overhead of tower at the same time,and the organic solv...A novel process which can purify the organic solvents from their azeotropes with water is proposed. In this process,water can be drained off both from bottom and overhead of tower at the same time,and the organic solvent is concentrated in the tower and accumulated in the middle vessel at last. So the progress is time-shortened and energy-saving. The product purity is 99. 8% and the product yield is more than 99.5%. Simulation of liquid-liquid equilibrium (LLE) and the equipment operation data agree well with the experiment.展开更多
[Objective] This study aimed to explore an effective method for rapid salt- extraction of high-quality genomic DNA from dried seeds of plants. [Method] Seeds of seven varieties of crops were ground into powder. A hund...[Objective] This study aimed to explore an effective method for rapid salt- extraction of high-quality genomic DNA from dried seeds of plants. [Method] Seeds of seven varieties of crops were ground into powder. A hundred milligrams of seed powder was added to extracting solution for high salt-extraction of genomic DNA. The yield and quality of extracted DNA were determined by using ultramicro UV/Vis spectrophotometer detection method, PCR and restriction enzyme digestion. [Result] About 619.67-1 811.21 ng of genomic DNA was extracted from per 100 mg of dried seed powder of seven varieties of conventional crops. A260/A280 ratios of the obtained DNA solution all ranged from 1.87 to 2.07, the purity and quality of PCR were suitable for PCR and restriction enzyme digestion. Clear target bands of specific endogenous gene fragments of seven varieties of crops were amplified by PCR, and the obtained DNA could be fully digested with EcoRV and Hindlll.[Conclusion] This method could be used for rapid extraction of high-quality genomic DNA from dried seeds.展开更多
The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,re...The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,reaction temperature and time were investigated, respectively. In addition, the optimum condition for this method was determined by a series of condition experiments. What was more, the K-feldspar ore and the leach residue after reaction based on the above optimum condition were analyzed by XRD, SEM and EDS,separately. The results of which indicated that the mechanism of extraction of potassium for this method was according to the ion exchange reaction between sodium ion and potassium ion, and the extraction ratio of potassium had an obvious improvement than that of traditional methods, which could reach up to 96.25%.Therefore, this method can be a feasible solution to extract potassium from K-feldspar ore for its low energy consumption and high efficiency.展开更多
Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines gi...Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.展开更多
1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fie...1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in展开更多
Potassium and phosphate were extracted at low temperature by acid hydrolysis process to decompose a new type of associated phosphorus and potassium ore. The main factors affecting the dissolution rate were investigate...Potassium and phosphate were extracted at low temperature by acid hydrolysis process to decompose a new type of associated phosphorus and potassium ore. The main factors affecting the dissolution rate were investigated, such as grinding fineness, the amount of sulfuric acid and fluoride salt, reaction time and temperature, etc. Meanwhile, the effects of various factors on the formation of soluble potassium and phosphate were also discussed. The reaction products and residues were determined by X-ray diffraction（XRD）, scanning electron microscopic（SEM） analysis and other means. The results showed that the dissolution rates of potassium and phosphorus were 70wt% and 93.7wt%, respectively, under the conditions of a grain size of 95.64wt% lessthan 0.074 mm, 9.78 g·g^（-1） sulfuric acid, 0.5 g·g^（-1） ammonium fluoride, 160 ℃ and a reaction time of 2h. The thermodynamic and chemical reaction mechanism was revealed that the primary reaction could be completed spontaneously in a temperature range of 298-433 K. The increase of reaction temperature had an important influence on ion exchange reaction, which was more conducive to the spontaneous process. The research will open up a new way for efficient use of potassium ore resources.展开更多
In light of the burgeoning energy technology sector and the ever-growing demand for lithium across diverse industrial domains,conventional lithium extraction methods have been proven inadequate due to their limited pr...In light of the burgeoning energy technology sector and the ever-growing demand for lithium across diverse industrial domains,conventional lithium extraction methods have been proven inadequate due to their limited production capacity and high operational costs.This work introduces a novel approach to the manganese-titanium based composite HMTO(Mn:Ti=1:4)lithium ion-sieve(LIS)nanospheres,employing lithium acetate dihydrate,manganese carbonate and titanium dioxide P25 as the primary materials.These nanospheres exhibit relatively uniform spherical morphology,narrow size distribution,small average particle size(ca.55 nm),large specific surface area(43.58 m^(2)g^(-1))and high surface O_(2)-content(59.01%).When utilized as the adsorbents for Li^(+)ions,the HMTO(Mn:Ti=1:4)LIS demonstrates a fast adsorption rate,approaching equilibrium within 6.0 h with an equilibrium adsorption capacity(qe)of 79.5 mg g^(-1)and a maximum adsorption capacity(qm)of 87.26 mg g^(-1)(initial concentration CO:1.8 g L^(-1)).In addition,the HMTO(Mn:Ti=1:4)also delivers a high lithium extraction from the simulated high magnesium-lithium molar ratio salt lake brine(Mg:Li=103),achieving a qeof 33.85 mg g^(-1)along with a remarkable selectivity(α_(Mg)^(Li)=2192.76).Particularly,the HMTO(Mn:Ti=1:4)LIS showcases a satisfactory recycling adsorption performance.The adsorption capacity remains at a high level,even that determined after the 5th cycle(55.45 mg g^(-1))surpasses that of the most recently reported adsorbents.Ultimately,the fantastic synergistic lithium adsorption mechanism is deliberately uncovered by leveraging the ion exchange principles and molecular dynamics(MD)simulations.展开更多
文摘A novel process which can purify the organic solvents from their azeotropes with water is proposed. In this process,water can be drained off both from bottom and overhead of tower at the same time,and the organic solvent is concentrated in the tower and accumulated in the middle vessel at last. So the progress is time-shortened and energy-saving. The product purity is 99. 8% and the product yield is more than 99.5%. Simulation of liquid-liquid equilibrium (LLE) and the equipment operation data agree well with the experiment.
基金Supported by Project of Common Safety Assessment Technology for Genetically Modified Organisms of the Ministry of Agriculture of PRC (2011ZX08011-006)~~
文摘[Objective] This study aimed to explore an effective method for rapid salt- extraction of high-quality genomic DNA from dried seeds of plants. [Method] Seeds of seven varieties of crops were ground into powder. A hundred milligrams of seed powder was added to extracting solution for high salt-extraction of genomic DNA. The yield and quality of extracted DNA were determined by using ultramicro UV/Vis spectrophotometer detection method, PCR and restriction enzyme digestion. [Result] About 619.67-1 811.21 ng of genomic DNA was extracted from per 100 mg of dried seed powder of seven varieties of conventional crops. A260/A280 ratios of the obtained DNA solution all ranged from 1.87 to 2.07, the purity and quality of PCR were suitable for PCR and restriction enzyme digestion. Clear target bands of specific endogenous gene fragments of seven varieties of crops were amplified by PCR, and the obtained DNA could be fully digested with EcoRV and Hindlll.[Conclusion] This method could be used for rapid extraction of high-quality genomic DNA from dried seeds.
基金Supported by the National Natural Science Foundation of China(21373252)Fundamental Research Project of Qing Hai Science&Technology Department(2016-ZJ-749)Qinghai Innovation Fund for Technology Based Firms(2014-GX-Q19)
文摘The low temperature molten salt method was used to extract potassium from K-feldspar ore, and some related factors including mass ratio between NaNO_3, NaOH, H_2O and K-feldspar ore, particle size of K-feldspar ore,reaction temperature and time were investigated, respectively. In addition, the optimum condition for this method was determined by a series of condition experiments. What was more, the K-feldspar ore and the leach residue after reaction based on the above optimum condition were analyzed by XRD, SEM and EDS,separately. The results of which indicated that the mechanism of extraction of potassium for this method was according to the ion exchange reaction between sodium ion and potassium ion, and the extraction ratio of potassium had an obvious improvement than that of traditional methods, which could reach up to 96.25%.Therefore, this method can be a feasible solution to extract potassium from K-feldspar ore for its low energy consumption and high efficiency.
基金financially supported by the National Natural Science Foundation of China(No.52072322)the Department of Science and Technology of Sichuan Province,China(Nos.23GJHZ0147,23ZDYF0262,2022YFG0294,and 2019-GH02-00052-HZ)。
文摘Electrochemical lithium extraction from salt lakes is an effective strategy for obtaining lithium at a low cost.Nevertheless,the elevated Mg:Li ratio and the presence of numerous coexisting ions in salt lake brines give rise to challenges,such as prolonged lithium extraction periods,diminished lithium extraction efficiency,and considerable environmental pollution.In this work,Li FePO4(LFP)served as the electrode material for electrochemical lithium extraction.The conductive network in the LFP electrode was optimized by adjusting the type of conductive agent.This approach resulted in high lithium extraction efficiency and extended cycle life.When the single conductive agent of acetylene black(AB)or multiwalled carbon nanotubes(MWCNTs)was replaced with the mixed conductive agent of AB/MWCNTs,the average diffusion coefficient of Li+in the electrode increased from 2.35×10^(-9)or 1.77×10^(-9)to 4.21×10^(-9)cm^(2)·s^(-1).At the current density of 20 mA·g^(-1),the average lithium extraction capacity per gram of LFP electrode increased from 30.36 mg with the single conductive agent(AB)to 35.62 mg with the mixed conductive agent(AB/MWCNTs).When the mixed conductive agent was used,the capacity retention of the electrode after 30 cycles reached 82.9%,which was considerably higher than the capacity retention of 65.8%obtained when the single AB was utilized.Meanwhile,the electrode with mixed conductive agent of AB/MWCNTs provided good cycling performance.When the conductive agent content decreased or the loading capacity increased,the electrode containing the mixed conductive agent continued to show excellent electrochemical performance.Furthermore,a self-designed,highly efficient,continuous lithium extraction device was constructed.The electrode utilizing the AB/MWCNT mixed conductive agent maintained excellent adsorption capacity and cycling performance in this device.This work provides a new perspective for the electrochemical extraction of lithium using LFP electrodes.
基金Financial support from the National Natural Science Foundation of China (21276194)the Specialized Research Fund for the Doctoral Program of Chinese Higher Education (20101208110003)the Key Pillar Program of Tianjin Municipal Science and Technology (11ZCKGX02800)
文摘1 Introduction As the lightest metal with the unique properties of energy production and storage,lithium is regarded as the new century energy metal.Lithium and its compounds were widely used in various industrial fields,especially in
基金Funded by the National Natural Science Fundation of China(51274158)the National Twelfth Five-Year Plan for Scientific and Technological Support(2013BAE04B03)the Scientific and Technological Support Project of Hubei Province(2015BCA251)
文摘Potassium and phosphate were extracted at low temperature by acid hydrolysis process to decompose a new type of associated phosphorus and potassium ore. The main factors affecting the dissolution rate were investigated, such as grinding fineness, the amount of sulfuric acid and fluoride salt, reaction time and temperature, etc. Meanwhile, the effects of various factors on the formation of soluble potassium and phosphate were also discussed. The reaction products and residues were determined by X-ray diffraction（XRD）, scanning electron microscopic（SEM） analysis and other means. The results showed that the dissolution rates of potassium and phosphorus were 70wt% and 93.7wt%, respectively, under the conditions of a grain size of 95.64wt% lessthan 0.074 mm, 9.78 g·g^（-1） sulfuric acid, 0.5 g·g^（-1） ammonium fluoride, 160 ℃ and a reaction time of 2h. The thermodynamic and chemical reaction mechanism was revealed that the primary reaction could be completed spontaneously in a temperature range of 298-433 K. The increase of reaction temperature had an important influence on ion exchange reaction, which was more conducive to the spontaneous process. The research will open up a new way for efficient use of potassium ore resources.
基金supported by the National Natural Science Foundation of China(22075304,22378390)Natural Science Foundation of Shandong Province,China(ZR2022MB075)+2 种基金State Key Laboratory of Organic-Inorganic Composites(oic-202401016)State Key Laboratory of Chemical Engineering(SKL-ChE-24A02)Beijing Natural Science Foundation,China(3222050).
文摘In light of the burgeoning energy technology sector and the ever-growing demand for lithium across diverse industrial domains,conventional lithium extraction methods have been proven inadequate due to their limited production capacity and high operational costs.This work introduces a novel approach to the manganese-titanium based composite HMTO(Mn:Ti=1:4)lithium ion-sieve(LIS)nanospheres,employing lithium acetate dihydrate,manganese carbonate and titanium dioxide P25 as the primary materials.These nanospheres exhibit relatively uniform spherical morphology,narrow size distribution,small average particle size(ca.55 nm),large specific surface area(43.58 m^(2)g^(-1))and high surface O_(2)-content(59.01%).When utilized as the adsorbents for Li^(+)ions,the HMTO(Mn:Ti=1:4)LIS demonstrates a fast adsorption rate,approaching equilibrium within 6.0 h with an equilibrium adsorption capacity(qe)of 79.5 mg g^(-1)and a maximum adsorption capacity(qm)of 87.26 mg g^(-1)(initial concentration CO:1.8 g L^(-1)).In addition,the HMTO(Mn:Ti=1:4)also delivers a high lithium extraction from the simulated high magnesium-lithium molar ratio salt lake brine(Mg:Li=103),achieving a qeof 33.85 mg g^(-1)along with a remarkable selectivity(α_(Mg)^(Li)=2192.76).Particularly,the HMTO(Mn:Ti=1:4)LIS showcases a satisfactory recycling adsorption performance.The adsorption capacity remains at a high level,even that determined after the 5th cycle(55.45 mg g^(-1))surpasses that of the most recently reported adsorbents.Ultimately,the fantastic synergistic lithium adsorption mechanism is deliberately uncovered by leveraging the ion exchange principles and molecular dynamics(MD)simulations.
