This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-preci...This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-precision laser interferometric displacement measurement.A stable power supply module is designed to provide low-noise voltage to the entire circuit.An analog circuit system is constructed,including key circuits such as photoelectric sensors,I-V amplification,zero adjustment,fully differential amplification,and amplitude modulation filtering.To acquire and process signals,the PMAC Acc24E3 data acquisition card is selected,which realizes phase demodulation through reversible square wave counting,inverts displacement information,and a visual interface for the host computer is designed.Experimental verification shows that the designed system achieves micrometer-level measurement accuracy within a range of 0-10mm,with a maximum measurement error of less than 1.2μm,a maximum measurement speed of 6m/s,and a resolution better than 0.158μm.展开更多
In this work we discuss SDSPbMM, an integrated Strategy for Data Stream Processing based on Measurement Metadata, applied to an outpatient monitoring scenario. The measures associated to the attributes of the patient ...In this work we discuss SDSPbMM, an integrated Strategy for Data Stream Processing based on Measurement Metadata, applied to an outpatient monitoring scenario. The measures associated to the attributes of the patient (entity) under monitoring, come from heterogeneous data sources as data streams, together with metadata associated with the formal definition of a measurement and evaluation project. Such metadata supports the patient analysis and monitoring in a more consistent way, facilitating for instance: i) The early detection of problems typical of data such as missing values, outliers, among others;and ii) The risk anticipation by means of on-line classification models adapted to the patient. We also performed a simulation using a prototype developed for outpatient monitoring, in order to analyze empirically processing times and variable scalability, which shed light on the feasibility of applying the prototype to real situations. In addition, we analyze statistically the results of the simulation, in order to detect the components which incorporate more variability to the system.展开更多
Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is di...Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is difficult to use the traditional probability theory to process the samples and assess the degree of uncertainty. Using the grey relational theory and the norm theory, the grey distance information approach, which is based on the grey distance information quantity of a sample and the average grey distance information quantity of the samples, is proposed in this article. The definitions of the grey distance information quantity of a sample and the average grey distance information quantity of the samples, with their characteristics and algorithms, are introduced. The correlative problems, including the algorithm of estimated value, the standard deviation, and the acceptance and rejection criteria of the samples and estimated results, are also proposed. Moreover, the information whitening ratio is introduced to select the weight algorithm and to compare the different samples. Several examples are given to demonstrate the application of the proposed approach. The examples show that the proposed approach, which has no demand for the probability distribution of small samples, is feasible and effective.展开更多
A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferr...A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferred in this Paper is described. By calculation and test, it is indicated that the error resulting from this method is about 0. 5% of the full scale and less than TSl's. By using this method we can set up the calibration curve according to the measurement range and the diameter of the hot wire at a certain accuracy.展开更多
Precision Livestock Farming studies are based on data that was measured from animals via technical devices. In the means of automation, it is usually not accounted for the animals’ reaction towards the devices or ind...Precision Livestock Farming studies are based on data that was measured from animals via technical devices. In the means of automation, it is usually not accounted for the animals’ reaction towards the devices or individual animal behaviour during the gathering of sensor data. In this study, 14 Holstein-Friesian cows were recorded with a 2D video camera while walking through a scanning passage comprising six Microsoft Kinect 3D cameras. Elementary behavioural traits like how long the cows avoided the passage, the time they needed to walk through or the number of times they stopped walking were assessed from the video footage and analysed with respect to the target variable “udder depth” that was calculated from the recorded 3D data using an automated procedure. Ten repeated passages were recorded of each cow. During the repetitions, the cows adjusted individually (p < 0.001) to the recording situations. The averaged total time to complete a passage (p = 0.05) and the averaged number of stops (p = 0.07) depended on the lactation numbers of the cows. The measurement precision of target variable “udder depth” was affected by the time the cows avoided the recording (p = 0.06) and by the time it took them to walk through the scanning passage (p = 0.03). Effects of animal behaviour during the collection of sensor data can alter the results and should, thus, be considered in the development of sensor based devices.展开更多
The velocities of tectonic plates derived from GNSS time series are regularly used as input data for geophysical models. However, as shown by numerous researches, the coordinates time series contain residual errors of...The velocities of tectonic plates derived from GNSS time series are regularly used as input data for geophysical models. However, as shown by numerous researches, the coordinates time series contain residual errors of a systematic nature, which can significantly affect the reliability of the obtained velocity estimates. This research shows that using non-classical error theory of measurement(NETM)for processing GNSS time series allows detecting the presence of weak, not removed from GNSS processing, sources of systematic errors. Based on the coordinate time series of selected permanent GNSS stations in Europe, we checked the empirical distributions of errors by the NETM on G. Jeffries’ recommendations and on the principles of the theory of hypothesis tests according to Pearson’s criterion. It is established that the obtained coordinates time series of GNSS-stations only partially confirm the hypothesis of their conformity to the normal Gaussian distribution law, and this may be the main reason for their unrepresentative classification. In the future, it is necessary to identify and take into account the causes of residual errors that distort the real distribution of the results of the GNSS time series.展开更多
在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分...在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分析的重要手段。通过系统总体方案设计,确认了系统参数及指标;分析了四桥臂DC/DC拓扑,并基于高端电流采样和隔离采样技术实现了系统电压、电流、功率和频率的采集,设计了功率驱动及单片机控制电路;探讨了适合单片机的MPPT爬坡搜索法软件;给出了基于LabVIEW的上位机操控系统的软件设计实现;搭建了测控系统,进行了MPPT和两种拓扑测控结果对比实验。实验结果表明测控系统达到了设计目标。展开更多
同步相量测量单元(phasor measurement unit, PMU)为电网运行监测提供了精准数据,然而通信中断、设备故障等原因导致数据质量问题愈发显著。某工程现场PMU上送主站数据出现功率振荡异常现象,分析发现直接原因是母线电压选取错误,工程现...同步相量测量单元(phasor measurement unit, PMU)为电网运行监测提供了精准数据,然而通信中断、设备故障等原因导致数据质量问题愈发显著。某工程现场PMU上送主站数据出现功率振荡异常现象,分析发现直接原因是母线电压选取错误,工程现场复杂的电网配置使得电压选取面临挑战。基于层次分析法对各电压选取方案的决策效果进行量化评估,综合考虑方案的优劣及适应性,最终推荐在特定场景下使用电压切换装置选取母线电压。该装置通过接入一次设备的刀闸,从而自动选择最佳电压源以保障母线电压随一次设备的运行方式同步切换,保障了PMU数据采集的准确性和一致性,进而提升了PMU数据质量。研究结果为涉及母线电压选取的实际应用场景提供了科学的决策支持,结合当地电网运行状况,为提升数据质量和优化电网监控提供有效方案。展开更多
文摘This thesis addresses the issues existing in traditional laser tracking displacement measurement technology in the field of ultraprecision metrology by designing a differential signal processing circuit for high-precision laser interferometric displacement measurement.A stable power supply module is designed to provide low-noise voltage to the entire circuit.An analog circuit system is constructed,including key circuits such as photoelectric sensors,I-V amplification,zero adjustment,fully differential amplification,and amplitude modulation filtering.To acquire and process signals,the PMAC Acc24E3 data acquisition card is selected,which realizes phase demodulation through reversible square wave counting,inverts displacement information,and a visual interface for the host computer is designed.Experimental verification shows that the designed system achieves micrometer-level measurement accuracy within a range of 0-10mm,with a maximum measurement error of less than 1.2μm,a maximum measurement speed of 6m/s,and a resolution better than 0.158μm.
文摘In this work we discuss SDSPbMM, an integrated Strategy for Data Stream Processing based on Measurement Metadata, applied to an outpatient monitoring scenario. The measures associated to the attributes of the patient (entity) under monitoring, come from heterogeneous data sources as data streams, together with metadata associated with the formal definition of a measurement and evaluation project. Such metadata supports the patient analysis and monitoring in a more consistent way, facilitating for instance: i) The early detection of problems typical of data such as missing values, outliers, among others;and ii) The risk anticipation by means of on-line classification models adapted to the patient. We also performed a simulation using a prototype developed for outpatient monitoring, in order to analyze empirically processing times and variable scalability, which shed light on the feasibility of applying the prototype to real situations. In addition, we analyze statistically the results of the simulation, in order to detect the components which incorporate more variability to the system.
文摘Data processing of small samples is an important and valuable research problem in the electronic equipment test. Because it is difficult and complex to determine the probability distribution of small samples, it is difficult to use the traditional probability theory to process the samples and assess the degree of uncertainty. Using the grey relational theory and the norm theory, the grey distance information approach, which is based on the grey distance information quantity of a sample and the average grey distance information quantity of the samples, is proposed in this article. The definitions of the grey distance information quantity of a sample and the average grey distance information quantity of the samples, with their characteristics and algorithms, are introduced. The correlative problems, including the algorithm of estimated value, the standard deviation, and the acceptance and rejection criteria of the samples and estimated results, are also proposed. Moreover, the information whitening ratio is introduced to select the weight algorithm and to compare the different samples. Several examples are given to demonstrate the application of the proposed approach. The examples show that the proposed approach, which has no demand for the probability distribution of small samples, is feasible and effective.
文摘A method of data processing to determine the coefficients of linearization equations for 1050 anemometer (produced by Thermo-Systems Inc. -TSI, USA) with the sensors made of domestic hot wire using the program preferred in this Paper is described. By calculation and test, it is indicated that the error resulting from this method is about 0. 5% of the full scale and less than TSl's. By using this method we can set up the calibration curve according to the measurement range and the diameter of the hot wire at a certain accuracy.
文摘Precision Livestock Farming studies are based on data that was measured from animals via technical devices. In the means of automation, it is usually not accounted for the animals’ reaction towards the devices or individual animal behaviour during the gathering of sensor data. In this study, 14 Holstein-Friesian cows were recorded with a 2D video camera while walking through a scanning passage comprising six Microsoft Kinect 3D cameras. Elementary behavioural traits like how long the cows avoided the passage, the time they needed to walk through or the number of times they stopped walking were assessed from the video footage and analysed with respect to the target variable “udder depth” that was calculated from the recorded 3D data using an automated procedure. Ten repeated passages were recorded of each cow. During the repetitions, the cows adjusted individually (p < 0.001) to the recording situations. The averaged total time to complete a passage (p = 0.05) and the averaged number of stops (p = 0.07) depended on the lactation numbers of the cows. The measurement precision of target variable “udder depth” was affected by the time the cows avoided the recording (p = 0.06) and by the time it took them to walk through the scanning passage (p = 0.03). Effects of animal behaviour during the collection of sensor data can alter the results and should, thus, be considered in the development of sensor based devices.
文摘The velocities of tectonic plates derived from GNSS time series are regularly used as input data for geophysical models. However, as shown by numerous researches, the coordinates time series contain residual errors of a systematic nature, which can significantly affect the reliability of the obtained velocity estimates. This research shows that using non-classical error theory of measurement(NETM)for processing GNSS time series allows detecting the presence of weak, not removed from GNSS processing, sources of systematic errors. Based on the coordinate time series of selected permanent GNSS stations in Europe, we checked the empirical distributions of errors by the NETM on G. Jeffries’ recommendations and on the principles of the theory of hypothesis tests according to Pearson’s criterion. It is established that the obtained coordinates time series of GNSS-stations only partially confirm the hypothesis of their conformity to the normal Gaussian distribution law, and this may be the main reason for their unrepresentative classification. In the future, it is necessary to identify and take into account the causes of residual errors that distort the real distribution of the results of the GNSS time series.
文摘在中小型永磁同步风力发电机中,桥式整流+DC/DC变换器拓扑具有结构简单的优点,其中DC/DC电路有Boost和Buck两种拓扑,探究两者的最大功率点跟踪(Maximum Power Point Tracking,MPPT)控制性能区别是对其优化设计的关键,测控系统是性能分析的重要手段。通过系统总体方案设计,确认了系统参数及指标;分析了四桥臂DC/DC拓扑,并基于高端电流采样和隔离采样技术实现了系统电压、电流、功率和频率的采集,设计了功率驱动及单片机控制电路;探讨了适合单片机的MPPT爬坡搜索法软件;给出了基于LabVIEW的上位机操控系统的软件设计实现;搭建了测控系统,进行了MPPT和两种拓扑测控结果对比实验。实验结果表明测控系统达到了设计目标。
文摘同步相量测量单元(phasor measurement unit, PMU)为电网运行监测提供了精准数据,然而通信中断、设备故障等原因导致数据质量问题愈发显著。某工程现场PMU上送主站数据出现功率振荡异常现象,分析发现直接原因是母线电压选取错误,工程现场复杂的电网配置使得电压选取面临挑战。基于层次分析法对各电压选取方案的决策效果进行量化评估,综合考虑方案的优劣及适应性,最终推荐在特定场景下使用电压切换装置选取母线电压。该装置通过接入一次设备的刀闸,从而自动选择最佳电压源以保障母线电压随一次设备的运行方式同步切换,保障了PMU数据采集的准确性和一致性,进而提升了PMU数据质量。研究结果为涉及母线电压选取的实际应用场景提供了科学的决策支持,结合当地电网运行状况,为提升数据质量和优化电网监控提供有效方案。
