Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis ...Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis model is built in this paper according to this special structure. And then ANSYS finite element analysis software is used to analyze brazing temperature field at different brazing parameters. The calculation results show that the temperature field of simulation has good agreement with that measured by experiment, which proves dependence of the model built in this paper. And also reference parameters could be provided for real brazing process through calculation in this model. Brazed joint of capiUary to plate with good performance is achieved using VEBB technology. The achievement of the study will be applied in aerocrafi in the future.展开更多
Purpose: Acromioclavicular (AC) joint dislocation is commonly treated using a clavicle hook plate (HP). However, previous reports have indicated that acromial fractures may occur after HP fixation. The purpose of this...Purpose: Acromioclavicular (AC) joint dislocation is commonly treated using a clavicle hook plate (HP). However, previous reports have indicated that acromial fractures may occur after HP fixation. The purpose of this study was to identify risk factors for acromial fractures. Methods: A retrospective study was conducted on 39 patients with AC joint dislocation who were treated using clavicle HP fixation in our hospital between 2006 and 2017. Related parameters, including Rockwood classification, hook angle, the degree of reduction, the coverage of the hook under the acromion, and the anteroposterior position of the hook under the acromion, were evaluated to identify risk factors for acromial fractures. Results: The mean age of the participants was 51.7 (range 19 - 81) years;34 were men and 5 were women. Injury occurred on the right side in 18 patients and on the left side in 21. Injuries were categorized as follows: 24 were Rockwood type III, one was type IV, and 14 were type V. Four of the 39 patients (10%) experienced acromial fractures. Statistical analyses indicated that the degree of reduction at the final follow-up was moderately correlated with the Constant score. Posterior positioning of the hook was the only identified risk factor for acromial fractures. Hook angle and the degree of reduction at the time of surgery were not significantly associated with acromial fractures. Conclusions: Postoperative shoulder function was associated with the degree of reduction at the final follow-up, suggesting that anatomical reduction is recommended for AC joint dislocation. Posterior positioning of the hook is a risk factor for acromial fractures;however, clavicle HP fixation provides a positive outcome for AC joint dislocation. Therefore, careful positioning of the hook is required for preventing acromial fractures.展开更多
Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was us...Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was used to weld Baosteel ship clad plates（ 2205 ＋ DH36）,and the performance of the welded joints was tested. The results indicate that the mechanical properties and the corrosion resistance of the welded joints meet the required specifications. The distribution of the main anti-corrosive elements and the phase ratio of the welded joint are analyzed,thereby indicating excellent uniformity and confirming that the welded joint is corrosion resistant.展开更多
This paper studies the effects of fiber orientaion and holes position on stress concentration and the determination of weakened areas in the composite of glass fiber reinforced epoxy resin around the hole for joints b...This paper studies the effects of fiber orientaion and holes position on stress concentration and the determination of weakened areas in the composite of glass fiber reinforced epoxy resin around the hole for joints by using the finite element method.In this study,for the observation of areas affected by stress concentration Tsai-Wu failure criterion is used to determine the failed elements and ANSYS Software is implemented for modeling.In order to compare the effect of geometric parameters on stress concentration around the holes,two types of hole position arrangement along with fibers orientation have been studied.Results show that the stress concentration coefficient is lower in the second type of holes arrangement in comparison with the first type for the same component dimensions.Increasing the distance from hole center to upper or lower edge of the sample and also decreasing the distance between holes,would result in an increase in the stress concentration.展开更多
文摘Some parts with capillary to plate joint have important application in aerocrafi. Vacuum electron beam brazing （VEBB） technology is used to realize this jointing with capillaries. Firstly 3D finite element analysis model is built in this paper according to this special structure. And then ANSYS finite element analysis software is used to analyze brazing temperature field at different brazing parameters. The calculation results show that the temperature field of simulation has good agreement with that measured by experiment, which proves dependence of the model built in this paper. And also reference parameters could be provided for real brazing process through calculation in this model. Brazed joint of capiUary to plate with good performance is achieved using VEBB technology. The achievement of the study will be applied in aerocrafi in the future.
文摘Purpose: Acromioclavicular (AC) joint dislocation is commonly treated using a clavicle hook plate (HP). However, previous reports have indicated that acromial fractures may occur after HP fixation. The purpose of this study was to identify risk factors for acromial fractures. Methods: A retrospective study was conducted on 39 patients with AC joint dislocation who were treated using clavicle HP fixation in our hospital between 2006 and 2017. Related parameters, including Rockwood classification, hook angle, the degree of reduction, the coverage of the hook under the acromion, and the anteroposterior position of the hook under the acromion, were evaluated to identify risk factors for acromial fractures. Results: The mean age of the participants was 51.7 (range 19 - 81) years;34 were men and 5 were women. Injury occurred on the right side in 18 patients and on the left side in 21. Injuries were categorized as follows: 24 were Rockwood type III, one was type IV, and 14 were type V. Four of the 39 patients (10%) experienced acromial fractures. Statistical analyses indicated that the degree of reduction at the final follow-up was moderately correlated with the Constant score. Posterior positioning of the hook was the only identified risk factor for acromial fractures. Hook angle and the degree of reduction at the time of surgery were not significantly associated with acromial fractures. Conclusions: Postoperative shoulder function was associated with the degree of reduction at the final follow-up, suggesting that anatomical reduction is recommended for AC joint dislocation. Posterior positioning of the hook is a risk factor for acromial fractures;however, clavicle HP fixation provides a positive outcome for AC joint dislocation. Therefore, careful positioning of the hook is required for preventing acromial fractures.
文摘Duplex stainless steel clad plate exhibits good performance and is relatively inexpensive,however,some difficulties must be overcome when welding different materials. In this study,submerged arc welding（ SAW） was used to weld Baosteel ship clad plates（ 2205 ＋ DH36）,and the performance of the welded joints was tested. The results indicate that the mechanical properties and the corrosion resistance of the welded joints meet the required specifications. The distribution of the main anti-corrosive elements and the phase ratio of the welded joint are analyzed,thereby indicating excellent uniformity and confirming that the welded joint is corrosion resistant.
文摘This paper studies the effects of fiber orientaion and holes position on stress concentration and the determination of weakened areas in the composite of glass fiber reinforced epoxy resin around the hole for joints by using the finite element method.In this study,for the observation of areas affected by stress concentration Tsai-Wu failure criterion is used to determine the failed elements and ANSYS Software is implemented for modeling.In order to compare the effect of geometric parameters on stress concentration around the holes,two types of hole position arrangement along with fibers orientation have been studied.Results show that the stress concentration coefficient is lower in the second type of holes arrangement in comparison with the first type for the same component dimensions.Increasing the distance from hole center to upper or lower edge of the sample and also decreasing the distance between holes,would result in an increase in the stress concentration.
