In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibration...In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.展开更多
This study introduced at first the background of numerous highway widening projects that have been developed in recent years in China.Using a large ground settlement simulator and a fiber Bragg grating (FBG) strain se...This study introduced at first the background of numerous highway widening projects that have been developed in recent years in China.Using a large ground settlement simulator and a fiber Bragg grating (FBG) strain sensor network system,a large-scale model test,with a similarity ratio of 1:2,was performed to analyze the influence of differential settlement between new and old subgrades on pavement structure under loading condition.The result shows that excessive differential settlement can cause considerable tensile strain in the pavement structure of a widened road,for which a maximum value (S) of 6 cm is recommended.Under the repetitive load,the top layers of pavement structure are subjected to the alternate action of tensile and compressive strains,which would eventually lead to a fatigue failure of the pavement.However,application of geogrid to the splice between the new and the old roads can reduce differential settlement to a limited extent.The new subgrade of a widened road is vulnerable to the influence of dynamic load transferred from the above pavement structures.While for the old subgrade,due to its comparatively high stiffness,it can well spread the load on the pavement statically or dynamically.The test also shows that application of geogrid can effectively prevent or defer the failure of pavement structure.With geogrid,the modulus of resilience of the subgrade is increased and inhomogeneous deformation can be reduced;therefore,the stress/strain distribution in pavement structure under loading condition becomes uniform.The results obtained in this context are expected to provide a helpful reference for structural design and maintenance strategy for future highway widening projects.展开更多
This paper gives theoretical analysis of visibility of fringes, which is influenced by distances, temporal and spatial coherence of source, in hard x-ray differential phase-contrast imaging with microfocus x-ray sourc...This paper gives theoretical analysis of visibility of fringes, which is influenced by distances, temporal and spatial coherence of source, in hard x-ray differential phase-contrast imaging with microfocus x-ray source. According to the character of longitudinal periodicity of the interferogram, the setup is insensitive to mechanical drift and vibrations. The effect of temporal coherence of x-ray source is investigated and its related bandwidth is derived. Based on the theory of partially coherent light, it shows that the requirement for the spatial coherence of x-ray source is not strict and can be met by the general microfocus x-ray tube for x-ray differential phase-contrast imaging.展开更多
The authors give the solution to the problem of one-dimensional conso l idation of double-layered ground with the use of the differential quadrature me t hod. Case studies showed that the computational results for por...The authors give the solution to the problem of one-dimensional conso l idation of double-layered ground with the use of the differential quadrature me t hod. Case studies showed that the computational results for pore-water pressure in soil layer agreed with those of analytical solution; and that in the computat ional results for the interface of soil layer also agreed with those of the anal ytical solution except for the small discrepancies during shortly after the star t of computation. The advantages of the solution presented in this paper are tha t compared with the analytical solution, it avoids the cumbersome work in solvin g the transcendental equation for eigenvalues, and in the case of the Laplace transform s olution, it can resolve the precision problem in the numerical solution of long time inverse Laplace transform. Because of the matrix form of the solution in th is paper, it is convenient for formulating computational program for engineering practice. The formulas for calculating double-layered ground consolidation may be easily extended to the case of multi-layered soils.展开更多
A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This me...A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.展开更多
Two-photon polymerization lithography is a technique that provides hundreds of nanometer resolution and full geometric freedom.Several X-ray polymer refractive lenses created by this technique were characterized using...Two-photon polymerization lithography is a technique that provides hundreds of nanometer resolution and full geometric freedom.Several X-ray polymer refractive lenses created by this technique were characterized using differential phase contrast imaging(DPCI)with a microfocus X-ray grating interferometer.The beam deflection angle and wavefront phase shift of the X-ray beam through the lens were obtained.Comparative tests using synchrotron radiation sources showed that the system could measure the surface shape of X-ray refractive lenses with an accuracy of 0.4μm.This study is important for improving the fabrication process and focusing performance of X-ray refractive lenses.展开更多
基金the Biomedical Science and Technology Support Special Project of Shanghai Science and Technology Committee(No.20S31908300)。
文摘In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.
文摘This study introduced at first the background of numerous highway widening projects that have been developed in recent years in China.Using a large ground settlement simulator and a fiber Bragg grating (FBG) strain sensor network system,a large-scale model test,with a similarity ratio of 1:2,was performed to analyze the influence of differential settlement between new and old subgrades on pavement structure under loading condition.The result shows that excessive differential settlement can cause considerable tensile strain in the pavement structure of a widened road,for which a maximum value (S) of 6 cm is recommended.Under the repetitive load,the top layers of pavement structure are subjected to the alternate action of tensile and compressive strains,which would eventually lead to a fatigue failure of the pavement.However,application of geogrid to the splice between the new and the old roads can reduce differential settlement to a limited extent.The new subgrade of a widened road is vulnerable to the influence of dynamic load transferred from the above pavement structures.While for the old subgrade,due to its comparatively high stiffness,it can well spread the load on the pavement statically or dynamically.The test also shows that application of geogrid can effectively prevent or defer the failure of pavement structure.With geogrid,the modulus of resilience of the subgrade is increased and inhomogeneous deformation can be reduced;therefore,the stress/strain distribution in pavement structure under loading condition becomes uniform.The results obtained in this context are expected to provide a helpful reference for structural design and maintenance strategy for future highway widening projects.
文摘This paper gives theoretical analysis of visibility of fringes, which is influenced by distances, temporal and spatial coherence of source, in hard x-ray differential phase-contrast imaging with microfocus x-ray source. According to the character of longitudinal periodicity of the interferogram, the setup is insensitive to mechanical drift and vibrations. The effect of temporal coherence of x-ray source is investigated and its related bandwidth is derived. Based on the theory of partially coherent light, it shows that the requirement for the spatial coherence of x-ray source is not strict and can be met by the general microfocus x-ray tube for x-ray differential phase-contrast imaging.
文摘The authors give the solution to the problem of one-dimensional conso l idation of double-layered ground with the use of the differential quadrature me t hod. Case studies showed that the computational results for pore-water pressure in soil layer agreed with those of analytical solution; and that in the computat ional results for the interface of soil layer also agreed with those of the anal ytical solution except for the small discrepancies during shortly after the star t of computation. The advantages of the solution presented in this paper are tha t compared with the analytical solution, it avoids the cumbersome work in solvin g the transcendental equation for eigenvalues, and in the case of the Laplace transform s olution, it can resolve the precision problem in the numerical solution of long time inverse Laplace transform. Because of the matrix form of the solution in th is paper, it is convenient for formulating computational program for engineering practice. The formulas for calculating double-layered ground consolidation may be easily extended to the case of multi-layered soils.
基金supported by the National Natural Science Foundation of China(6112010600461225005)
文摘A grating lobes suppression method for chirp-subpulse stepped frequency（CSSF） signals is proposed, which is applied to deformation monitoring using the ground based synthetic aperture radar（GB-SAR） system. This method is based on accurate estimation and correction of the phase and amplitude error along two dimensions（range and azimuth）, i.e., the error estimation inside the subpulse（in-subpulse error） and across the stepped frequency subpulses（cross-subpulse error） of transmitted CSSF signals. Validated both with simulated data and experimental data recorded in the deformation monitoring campaign, it can be seen that the method as well as the relative conclusions can be fully and effectively applied to most of the stepped frequency systems.
基金supported by the National Key Research and Development Program of China(No.2023YFA1608602)the joint Funding from the National Synchrotron Radiation Laboratory(No.KY2090000080)+1 种基金the China Postdoctoral Science Foundation(No.2024M753120)the Fundamental Research Funds for the Central Universities(No.WK2310000126)。
文摘Two-photon polymerization lithography is a technique that provides hundreds of nanometer resolution and full geometric freedom.Several X-ray polymer refractive lenses created by this technique were characterized using differential phase contrast imaging(DPCI)with a microfocus X-ray grating interferometer.The beam deflection angle and wavefront phase shift of the X-ray beam through the lens were obtained.Comparative tests using synchrotron radiation sources showed that the system could measure the surface shape of X-ray refractive lenses with an accuracy of 0.4μm.This study is important for improving the fabrication process and focusing performance of X-ray refractive lenses.
