The physical model of a ten-strand billet caster tundish was established to study the effects of various flow control devices on the melt flow. Before and after the optimization of the melt flow, the inclusion removal...The physical model of a ten-strand billet caster tundish was established to study the effects of various flow control devices on the melt flow. Before and after the optimization of the melt flow, the inclusion removal in the tundish was evaluated by plant trials. The physical modeling results show that when combined with a baffle, the turbulence inhibitor, instead of the impact pad, can significantly improve the melt flow. A turbulence inhibitor with a longer length of inner cavity and without an extending lip at the top of the sidewall seems to be efficient in the improvement of the melt flow. Various types and designs of baffles all influence the flow characteristics significantly. The "V" type baffles are better than the straight baffles for flow control. The "V" type baffle with four inclined holes at the sidewall away from the stopper rods is better in melt flow control than the one with one inclined hole at each sidewall. The combination of a well-designed turbulence inhibitor and an appropriate baffle shows high efficiency on improving the melt flow and an optimal proposal was presented. Plant trials indicate that, compared with the original tundish configuration in prototype, the inclusions reduce by 42% and the inclusion distribution of individual strands is more similar with the optimal one. The optimal tundish configuration effectively improves the melt flow in the ten-strand billet caster tundish.展开更多
A comprehensive 3D turbulent CFD study has been carried out to simulate a Low-Head(LH)vertical Direct Chill(DC)rolling ingot caster for the common magnesium alloy AZ31.The model used in this study takes into account t...A comprehensive 3D turbulent CFD study has been carried out to simulate a Low-Head(LH)vertical Direct Chill(DC)rolling ingot caster for the common magnesium alloy AZ31.The model used in this study takes into account the coupled laminar/turbulent melt flow and solidification aspects of the process and is based on the control-volume finite-difference approach.Following the aluminum/magnesium DC casting industrial practices,the LH mold is taken as 30 mm with a hot top of 60 mm.The previously verified in-house code has been modified to model the present casting process.Important quantitative results are obtained for four casting speeds,for three inlet melt pouring temperatures(superheats)and for three metal-mold contact heat transfer coefficients for the steady state operational phase of the caster.The variable cooling water temperatures reported by the industry are considered for the primary and secondary cooling zones during the simulations.Specifically,the temperature and velocity fields,sump depth and sump profiles,mushy region thickness,solid shell thickness at the exit of the mold and axial temperature profiles at the center and at three strategic locations at the surface of the slab are presented and discussed.展开更多
The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stir...The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.展开更多
During strip casting,the thickness deviation of casting strip directly affects the quality of the hot-rolled sheet because the casting strip needs to be rolled only once.To accurately control the gap between casting r...During strip casting,the thickness deviation of casting strip directly affects the quality of the hot-rolled sheet because the casting strip needs to be rolled only once.To accurately control the gap between casting rolls and reduce the thickness deviation of the casting strip,a conceptual design of a prestressed twin-roll caster is proposed herein;this caster involves the setting of a constant pressure balancing cylinder between the chocks of two casting rolls.The balancing cylinder hydraulic system adopts a three-way servo valve that controls the hydraulic cylinder.The parameters of the hydraulic power components are determined using the principle of optimal power matching,and the hydraulic system model of the balancing cylinder is thus established.The dynamic analysis and simulation of the hydraulic system are performed using finite element model to obtain relevant evaluation indexes.Finally,the hydraulic system is corrected using proportional-integral-derivative (PID) correction to achieve a well-controlled effect.Thus,the engineering requirements of the strip casting process can be met.展开更多
The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure....The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure. Traditional SEN can not decrease the surface turbulence and penetration depth at the same time, especially at high casting speed. In order to improve the fluid flow in the mould, a new structure SEN-Dissipation SEN have been invented. The water modeling experiments proved that the dissipation SEN could satisfy, the needs of fluid flow condition in the mould at high casting speed.展开更多
On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company...On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company of ThyssenKrupp Stainless group. The new caster is designed for a total capacity of approx.900.000 tpy of stainless steel slabs covering the complete range of stainless grades,including AISI 300 and 400 families(austenitic,ferritic and martensitic grades).This state of the art caster for the production of 215 mm thick slabs replaced an existing thin slab caster. This paper resumes the reasons of the installation of the new plant designed,manufactured erected and commissioned by Danieli and describes the technological solution,main features as well as the excellent results of this state of the art caster.展开更多
The present study relates to preparation corrosion inhibiter from caster oil for carbon steel pipeline by two steps;the first step includes sulfonation of caster oil and the second step includes amination the sulfonic...The present study relates to preparation corrosion inhibiter from caster oil for carbon steel pipeline by two steps;the first step includes sulfonation of caster oil and the second step includes amination the sulfonic caster oil with ammonia solution the final product characterized by FTIR. The effectiveness of the synthesized compounds is studied as corrosion inhibitors for carbon steel;in formation, water was investigated by electrochemical techniques using Tafel plot methods. The synthesized compounds showed enhancement in inhibition efficiencies, and then studied the effect of temperatures on inhibition efficiency.展开更多
This paper presents the improvements on equipment and process technologies of Baosteel EAF Bloom Caster Production Line.By using the new VOD equipment,super low carbon super 13Cr was successfully made;By applying and ...This paper presents the improvements on equipment and process technologies of Baosteel EAF Bloom Caster Production Line.By using the new VOD equipment,super low carbon super 13Cr was successfully made;By applying and developing the Soft Reduction technology,very good results were achieved on high quality steel grades such as tire cord steel,bear steel,hi-alloy steel;the ladle Anti-Slag Detector is normally applied,based on the detail analysis during the performance test period,the Detector gives out slag entrapment alarms 7-9 s average before slag flows into tundish.By optimizing production control points of each key process,great achievements are realized on high quality steel grades such as tire cord steel,bear steel,hi-alloy steel and hi-S/Al steel,etc.Some achievements and technical indices are presented,too.展开更多
基金supported by the National Natural Science Foundation of China(No.51474059,No.51204042)the Program for Liaoning Excellent Talents in University(No.LJQ2014031)the Fundamental Research Funds for the Central Universities(No.N140205003)
文摘The physical model of a ten-strand billet caster tundish was established to study the effects of various flow control devices on the melt flow. Before and after the optimization of the melt flow, the inclusion removal in the tundish was evaluated by plant trials. The physical modeling results show that when combined with a baffle, the turbulence inhibitor, instead of the impact pad, can significantly improve the melt flow. A turbulence inhibitor with a longer length of inner cavity and without an extending lip at the top of the sidewall seems to be efficient in the improvement of the melt flow. Various types and designs of baffles all influence the flow characteristics significantly. The "V" type baffles are better than the straight baffles for flow control. The "V" type baffle with four inclined holes at the sidewall away from the stopper rods is better in melt flow control than the one with one inclined hole at each sidewall. The combination of a well-designed turbulence inhibitor and an appropriate baffle shows high efficiency on improving the melt flow and an optimal proposal was presented. Plant trials indicate that, compared with the original tundish configuration in prototype, the inclusions reduce by 42% and the inclusion distribution of individual strands is more similar with the optimal one. The optimal tundish configuration effectively improves the melt flow in the ten-strand billet caster tundish.
文摘A comprehensive 3D turbulent CFD study has been carried out to simulate a Low-Head(LH)vertical Direct Chill(DC)rolling ingot caster for the common magnesium alloy AZ31.The model used in this study takes into account the coupled laminar/turbulent melt flow and solidification aspects of the process and is based on the control-volume finite-difference approach.Following the aluminum/magnesium DC casting industrial practices,the LH mold is taken as 30 mm with a hot top of 60 mm.The previously verified in-house code has been modified to model the present casting process.Important quantitative results are obtained for four casting speeds,for three inlet melt pouring temperatures(superheats)and for three metal-mold contact heat transfer coefficients for the steady state operational phase of the caster.The variable cooling water temperatures reported by the industry are considered for the primary and secondary cooling zones during the simulations.Specifically,the temperature and velocity fields,sump depth and sump profiles,mushy region thickness,solid shell thickness at the exit of the mold and axial temperature profiles at the center and at three strategic locations at the surface of the slab are presented and discussed.
文摘The electromagnetic field and flow analysis model were developed to simulate the electromagnetic field and the flow pattern in a vertical curved continuous slab caster with the in-roll type strand electromagnetic stirring. The transient electromagnetic field distribution and the induced electromagnetic force were numerically described. The effects of stirring current, stirring frequency, and different stirrer configurations on the electromagnetically driven flow field in the strand were investigated and the optimization of the stirring parameters was discussed by performing a relative comparison of numerical results. Results show that the in-roller type strand electromagnetic stirrer （S- EMS） pair generates the fluctuating magnetic fields, penetrating through the cast slab and periodically parallel shift- ing along the slab wide face w!th time evolution. The transient induced electromagnetic forces travels toward the magnetic flux shifting direction, Different stirring parameters （i. e. current and frequency） and stirrer configurations affect the stirring strength and the flow rbcirculation pattern in the strand, which are closely related to metallurgical performances of the stirrers. There is an optimum frequency to obtain the maximum stirring. The present model pro vides a relatively theoretical insight into the in-roll type strand electromagnetic stirring system for best operating.
文摘During strip casting,the thickness deviation of casting strip directly affects the quality of the hot-rolled sheet because the casting strip needs to be rolled only once.To accurately control the gap between casting rolls and reduce the thickness deviation of the casting strip,a conceptual design of a prestressed twin-roll caster is proposed herein;this caster involves the setting of a constant pressure balancing cylinder between the chocks of two casting rolls.The balancing cylinder hydraulic system adopts a three-way servo valve that controls the hydraulic cylinder.The parameters of the hydraulic power components are determined using the principle of optimal power matching,and the hydraulic system model of the balancing cylinder is thus established.The dynamic analysis and simulation of the hydraulic system are performed using finite element model to obtain relevant evaluation indexes.Finally,the hydraulic system is corrected using proportional-integral-derivative (PID) correction to achieve a well-controlled effect.Thus,the engineering requirements of the strip casting process can be met.
文摘The fluid flow in the mould of the thin slab continuous caster has a large intluence on the quality of slabs and its productivity.The fluid flow pattern can be controlled by the SEN (Submerged Entry Nozzle) structure. Traditional SEN can not decrease the surface turbulence and penetration depth at the same time, especially at high casting speed. In order to improve the fluid flow in the mould, a new structure SEN-Dissipation SEN have been invented. The water modeling experiments proved that the dissipation SEN could satisfy, the needs of fluid flow condition in the mould at high casting speed.
文摘On April 23,2009,a new single strand slab caster at ThyssenKrupp Acciai Speciali Terni(TKAST) was successfully started up with the first cast of AISI 304 grade in Terni plant,central Italy.TKAST is the Italian company of ThyssenKrupp Stainless group. The new caster is designed for a total capacity of approx.900.000 tpy of stainless steel slabs covering the complete range of stainless grades,including AISI 300 and 400 families(austenitic,ferritic and martensitic grades).This state of the art caster for the production of 215 mm thick slabs replaced an existing thin slab caster. This paper resumes the reasons of the installation of the new plant designed,manufactured erected and commissioned by Danieli and describes the technological solution,main features as well as the excellent results of this state of the art caster.
文摘The present study relates to preparation corrosion inhibiter from caster oil for carbon steel pipeline by two steps;the first step includes sulfonation of caster oil and the second step includes amination the sulfonic caster oil with ammonia solution the final product characterized by FTIR. The effectiveness of the synthesized compounds is studied as corrosion inhibitors for carbon steel;in formation, water was investigated by electrochemical techniques using Tafel plot methods. The synthesized compounds showed enhancement in inhibition efficiencies, and then studied the effect of temperatures on inhibition efficiency.
文摘This paper presents the improvements on equipment and process technologies of Baosteel EAF Bloom Caster Production Line.By using the new VOD equipment,super low carbon super 13Cr was successfully made;By applying and developing the Soft Reduction technology,very good results were achieved on high quality steel grades such as tire cord steel,bear steel,hi-alloy steel;the ladle Anti-Slag Detector is normally applied,based on the detail analysis during the performance test period,the Detector gives out slag entrapment alarms 7-9 s average before slag flows into tundish.By optimizing production control points of each key process,great achievements are realized on high quality steel grades such as tire cord steel,bear steel,hi-alloy steel and hi-S/Al steel,etc.Some achievements and technical indices are presented,too.
