The novel integrated circuit (IC) temperature sensor presented in this paper works similarly as a two terminal Zener, has breakdown voltage directly proportional to Kelvin temperature at 10 mV/℃, with typical error ...The novel integrated circuit (IC) temperature sensor presented in this paper works similarly as a two terminal Zener, has breakdown voltage directly proportional to Kelvin temperature at 10 mV/℃, with typical error of less than ±1.0℃ over a temperature range from -50℃ to +125℃. In addition to all the features that conventional IC temperature sensors have, the new device also has very low static power dissipation ( 0.5 mW ) , low output impedance ( less than 1Ω), excellent stability, high reproducibility, and high precision. The sensor's circuit design and layout are discussed in detail. Applications of the sensor include almost any type of temperature sensing over the range of -50℃-+125℃. The low impedance and linear output of the device make interfacing the readout or control circuitry especially easy. Due to the excellent performance and low cost of this sensor, more applications of the sensor over wide temperature range are expected.展开更多
With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are ...With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.展开更多
Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors...Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors into three categories:metal-based,inorganic semiconductor,and organic semiconductor materials.Metal-based materials are widely used in medical and industrial applications due to their linearity,stability,and reliability.Inorganic semiconductors provide rapid response times and high miniaturization potential,making them promising for biomedical and environmental monitoring.Organic semiconductors offer high sensitivity and ease of processing,enabling the development of flexible and stretchable sensors.This review analyzes recent studies for each material type,covering design principles,performance characteristics,and applications,highlighting key advantages and challenges regarding miniaturization,sensitivity,response time,and biocompatibility.Furthermore,critical performance parameters of implantable temperature sensors based on different material types are summarized,providing valuable references for future sensor design and optimization.The future development of implantable temperature sensors is discussed,focusing on improving biocompatibility,long-term stability,and multifunctional integration.These advancements are expected to expand the application potential of implantable sensors in telemedicine and dynamic physiological monitoring.展开更多
Extreme environments challenge the structural health monitoring of advanced equipment.In-situ dynamic tracking temperature is of particular value due to its enormous impact on material properties.However,the realizati...Extreme environments challenge the structural health monitoring of advanced equipment.In-situ dynamic tracking temperature is of particular value due to its enormous impact on material properties.However,the realization of such integrated temperature sensors typically requires complicated layer-by-layer molding and sintering processes including additional thermal barrier coatings.Herein,we report a laser-induced in-situ conductive passivation strategy for the fabrication of a thin-film based wide-range temperature sensor.The instantaneous thermal effect of laser irradiation creates crystalline conductive traces in response to temperature variations.Synchronously,it also allows the formation of an amorphous antioxidative layer without necessitating extra protective coatings.Such configuration enables precise real-time sensing across-50℃to 950℃following the Steinhart-Hart equation.It also exhibits durable performance with only 1.2%drift over 20 hours during long-term high-temperature,instant thermal shock,frequent wearing,and severe vibration.This in-situ,facile laser manufacturing strategy holds great promise in structural health monitoring and fault diagnosis for advanced equipment working in extreme environments.展开更多
In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature o...In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature of 600℃. The design parameters of the antenna are similar to those of the sensor, which will increase the coupling strength between the sensor and testing antenna. The antenna is fabricated in thick film integrated technology, and the properties of the alumina ceramic and silver ensure the feasibility of the antenna in high-temperature environments. The sensor, coupled with the ceramic antenna, is investigated using a high-temperature pressure testing platform. The experimental measurement results show that the pressure signal in a harsh environment can be detected by the frequency diversity of the sensor.展开更多
Bulky external power supplies largely limit the continuous long-term application and miniaturization development of smart sensing devices.Here,we fabricate a flexible and wearable integrated sensing system on an elect...Bulky external power supplies largely limit the continuous long-term application and miniaturization development of smart sensing devices.Here,we fabricate a flexible and wearable integrated sensing system on an electrospun all-nanofiber platform.The three parts of the sensing system are all obtained by a facile ink-based direct writing method.The resistive pressure sensor is realized by decorating MXene sheets on TPU nanofiber.And,the resistive temperature sensor is prepared by compositing MXene sheets into poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS).The thin-film zinc–air battery(ZAB)includes an interdigital zinc–air electrode that is bonded with a gel polymer electrolyte.It can supply a high open-circuit voltage of 1.39 V and a large areal capacity of 18.2 mAh cm^(-2) for stable and reliable power-supplying sensing parts operation.Thanks to the hydrophobic nature of TPU and open-ended micropores in the TPU nanofiber,the sensing system is waterproof,self-cleaning,and air and moisture permeable.For application,the above-mentioned functional components are seamlessly integrated into an intelligent electronic wristband,which is comfortably worn on a human wrist to monitor pulse and body temperature in real time with continuous operation of up to 4 h.By the novel design and remarkable performance,the proposed integrated all-nanofiber sensing system presents a promising solution for developing advanced multifunctional wearable electronics.展开更多
The scientific monitoring and reliable telecommunications(SMART)initiative,led by a joint task force including ITU,aims to integrate electronic sensors into undersea telecommunications cables for real-time and high-se...The scientific monitoring and reliable telecommunications(SMART)initiative,led by a joint task force including ITU,aims to integrate electronic sensors into undersea telecommunications cables for real-time and high-sensitivity subsea monitoring.The current integrated sensing and communication(ISAC)solution to the SMART application still relies on wavelength band multiplexing of sensing information via Ethernet switches,leading to optical communication bandwidth waste.To achieve the dense and low-interference ISAC for SMART network applications,we demonstrate the co-transmissions of coherent optical digital subcarrier modulation(DSCM)communication signals and temperature sensing information in the SMART system.Besides the co-transmission capability,the special design of the sensing transmission format is made to enable the compatible DSP with DSCM communications,which shares the same wavelength channel.Moreover,due to the different physical locations of the in-line sensing joints to the communication transceivers in the SMART system,it is hard to align the wavelength of the communication laser and the sensing one,which cannot ensure the precise allocation of sensing information into the frequency blanks of DSCM communication signals.To deal with these two issues,the sensing information at inline joints is proposed to be modulated in the manner of optical single-sideband(SSB)modulation and frequency modulation(FM),and then the precise allocation into the frequency blanks of DSCM communication signals can be realized,along with the full compatibility to demodulate the sensed temperature using the traditional frequency offset estimation in coherent DSP.Experiments on a two-span repeatered single-mode fiber link validate the integration of 20 GBaud optical DP-QAM16 transmissions and real-time temperature sensing at a sensing joint.Advanced communications are enabled by implementing space-time coding on DSCM communication signals,with 0.2 dB Q factor improvement.As for the sensing functionality,the temperature sensing resolution at 0.0625°C,which reaches the limitation of the employed electronic thermometer DS18B20,has been obtained by using the communication-compatible DSP.We believe the proposed ISAC scheme along with the corresponding DSP flowchart makes sense for monitoring the subsea via the advanced SMART cables.展开更多
文摘The novel integrated circuit (IC) temperature sensor presented in this paper works similarly as a two terminal Zener, has breakdown voltage directly proportional to Kelvin temperature at 10 mV/℃, with typical error of less than ±1.0℃ over a temperature range from -50℃ to +125℃. In addition to all the features that conventional IC temperature sensors have, the new device also has very low static power dissipation ( 0.5 mW ) , low output impedance ( less than 1Ω), excellent stability, high reproducibility, and high precision. The sensor's circuit design and layout are discussed in detail. Applications of the sensor include almost any type of temperature sensing over the range of -50℃-+125℃. The low impedance and linear output of the device make interfacing the readout or control circuitry especially easy. Due to the excellent performance and low cost of this sensor, more applications of the sensor over wide temperature range are expected.
基金support from Liao Ning Revitalization Talents Program(XLYC1907144)Dalian Youth Science and Technology Star Project Support Program(No.2017RQ104)+6 种基金National Key Research and Development Program of China(No.2020YFB0311600)National Natural Science Foundation of China(Grant Nos.22125903,51872283,22075279)Liaoning BaiQianWan Talents Program(Grant XLYC1807153)Dalian Innovation Support Plan for High Level Talents(2019RT09)Dalian National Laboratory For Clean Energy(DNL),CAS,DNL Cooperation Fund,CAS(DNL201912,DNL201915,DNL202016,DNL202019)DICP(DICP ZZBS201802,DICP I2020032)The Joint Fund of the Yulin University and the Dalian National Laboratory for Clean Energy(YLU-DNL Fund 2021002,2021009).
文摘With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.
基金supported by the National Natural Science Foundation of China(NSFC)(62422501)Beijing Nova Program(20230484254,20240484742)Hebei Natural Science Foundation(F2024105039).
文摘Implantable temperature sensors are revolutionizing physiological monitoring and playing a crucial role in diagnostics,therapeutics,and life sciences research.This review classifies the materials used in these sensors into three categories:metal-based,inorganic semiconductor,and organic semiconductor materials.Metal-based materials are widely used in medical and industrial applications due to their linearity,stability,and reliability.Inorganic semiconductors provide rapid response times and high miniaturization potential,making them promising for biomedical and environmental monitoring.Organic semiconductors offer high sensitivity and ease of processing,enabling the development of flexible and stretchable sensors.This review analyzes recent studies for each material type,covering design principles,performance characteristics,and applications,highlighting key advantages and challenges regarding miniaturization,sensitivity,response time,and biocompatibility.Furthermore,critical performance parameters of implantable temperature sensors based on different material types are summarized,providing valuable references for future sensor design and optimization.The future development of implantable temperature sensors is discussed,focusing on improving biocompatibility,long-term stability,and multifunctional integration.These advancements are expected to expand the application potential of implantable sensors in telemedicine and dynamic physiological monitoring.
基金the financial support from the National Natural Science Foundation of China(52475610,52105593)the Zhejiang Provincial Natural Science Foundation of China(LDQ24E050001)+1 种基金the"Pioneer"and"Leading Goose"R&D Program of Zhejiang(2023C03007,2024C01173)the Fundamental Research Funds for the Central Universities(226-2024-00085)。
文摘Extreme environments challenge the structural health monitoring of advanced equipment.In-situ dynamic tracking temperature is of particular value due to its enormous impact on material properties.However,the realization of such integrated temperature sensors typically requires complicated layer-by-layer molding and sintering processes including additional thermal barrier coatings.Herein,we report a laser-induced in-situ conductive passivation strategy for the fabrication of a thin-film based wide-range temperature sensor.The instantaneous thermal effect of laser irradiation creates crystalline conductive traces in response to temperature variations.Synchronously,it also allows the formation of an amorphous antioxidative layer without necessitating extra protective coatings.Such configuration enables precise real-time sensing across-50℃to 950℃following the Steinhart-Hart equation.It also exhibits durable performance with only 1.2%drift over 20 hours during long-term high-temperature,instant thermal shock,frequent wearing,and severe vibration.This in-situ,facile laser manufacturing strategy holds great promise in structural health monitoring and fault diagnosis for advanced equipment working in extreme environments.
基金Project supported by the National Natural Science Foundation for Distinguished Young Scholars,China(Grant No.51425505)the National Natural Science Foundation of China(Grant No.61471324)+1 种基金the Program for the Outstanding Innovative Teams of Higher Learning Institutions of Shanxi Province,China(Grant No.2013-077)the Graduate Students Outstanding Innovation Project of Shanxi Province,China(Grant No.20143020)
文摘In this paper, a novel antenna is proposed for high-temperature testing, which can make the high-temperature pressure characteristics of a wireless passive ceramic pressure sensor demonstrated at up to a temperature of 600℃. The design parameters of the antenna are similar to those of the sensor, which will increase the coupling strength between the sensor and testing antenna. The antenna is fabricated in thick film integrated technology, and the properties of the alumina ceramic and silver ensure the feasibility of the antenna in high-temperature environments. The sensor, coupled with the ceramic antenna, is investigated using a high-temperature pressure testing platform. The experimental measurement results show that the pressure signal in a harsh environment can be detected by the frequency diversity of the sensor.
基金supported by the National Natural Science Foundation of China under Grant(62174068)the Tianjin Science and Technology Plan Project(22JCZDJC00630)+2 种基金the Higher Education Institution Science and Technology Research Project of Hebei Province(JZX2024024)the China National Key Research and Development Program(2022YFC3601400)the Natural Science Foundation of Shandong Province China,(ZR2020ME120).
文摘Bulky external power supplies largely limit the continuous long-term application and miniaturization development of smart sensing devices.Here,we fabricate a flexible and wearable integrated sensing system on an electrospun all-nanofiber platform.The three parts of the sensing system are all obtained by a facile ink-based direct writing method.The resistive pressure sensor is realized by decorating MXene sheets on TPU nanofiber.And,the resistive temperature sensor is prepared by compositing MXene sheets into poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS).The thin-film zinc–air battery(ZAB)includes an interdigital zinc–air electrode that is bonded with a gel polymer electrolyte.It can supply a high open-circuit voltage of 1.39 V and a large areal capacity of 18.2 mAh cm^(-2) for stable and reliable power-supplying sensing parts operation.Thanks to the hydrophobic nature of TPU and open-ended micropores in the TPU nanofiber,the sensing system is waterproof,self-cleaning,and air and moisture permeable.For application,the above-mentioned functional components are seamlessly integrated into an intelligent electronic wristband,which is comfortably worn on a human wrist to monitor pulse and body temperature in real time with continuous operation of up to 4 h.By the novel design and remarkable performance,the proposed integrated all-nanofiber sensing system presents a promising solution for developing advanced multifunctional wearable electronics.
基金National Natural Science Foundation of China(62475178)Yangtze River Delta Region Integration Project(2024CSJGG2600).
文摘The scientific monitoring and reliable telecommunications(SMART)initiative,led by a joint task force including ITU,aims to integrate electronic sensors into undersea telecommunications cables for real-time and high-sensitivity subsea monitoring.The current integrated sensing and communication(ISAC)solution to the SMART application still relies on wavelength band multiplexing of sensing information via Ethernet switches,leading to optical communication bandwidth waste.To achieve the dense and low-interference ISAC for SMART network applications,we demonstrate the co-transmissions of coherent optical digital subcarrier modulation(DSCM)communication signals and temperature sensing information in the SMART system.Besides the co-transmission capability,the special design of the sensing transmission format is made to enable the compatible DSP with DSCM communications,which shares the same wavelength channel.Moreover,due to the different physical locations of the in-line sensing joints to the communication transceivers in the SMART system,it is hard to align the wavelength of the communication laser and the sensing one,which cannot ensure the precise allocation of sensing information into the frequency blanks of DSCM communication signals.To deal with these two issues,the sensing information at inline joints is proposed to be modulated in the manner of optical single-sideband(SSB)modulation and frequency modulation(FM),and then the precise allocation into the frequency blanks of DSCM communication signals can be realized,along with the full compatibility to demodulate the sensed temperature using the traditional frequency offset estimation in coherent DSP.Experiments on a two-span repeatered single-mode fiber link validate the integration of 20 GBaud optical DP-QAM16 transmissions and real-time temperature sensing at a sensing joint.Advanced communications are enabled by implementing space-time coding on DSCM communication signals,with 0.2 dB Q factor improvement.As for the sensing functionality,the temperature sensing resolution at 0.0625°C,which reaches the limitation of the employed electronic thermometer DS18B20,has been obtained by using the communication-compatible DSP.We believe the proposed ISAC scheme along with the corresponding DSP flowchart makes sense for monitoring the subsea via the advanced SMART cables.
