在实验室模拟攀钢现场条件 ,研究了提高 Si O2 / Ti O2 比值 (增加富矿粉配比 )和添加萤石、氧化锰、重晶石、硼泥等辅料对钒钛烧结矿软熔滴落性能的影响。结果表明 ,提高 Si O2 / Ti O2 比值和添加萤石、氧化锰、重晶石、硼泥等辅料均...在实验室模拟攀钢现场条件 ,研究了提高 Si O2 / Ti O2 比值 (增加富矿粉配比 )和添加萤石、氧化锰、重晶石、硼泥等辅料对钒钛烧结矿软熔滴落性能的影响。结果表明 ,提高 Si O2 / Ti O2 比值和添加萤石、氧化锰、重晶石、硼泥等辅料均有利于改善钒钛烧结矿软熔滴落性能。展开更多
This study aimed to explore a new degradation method-photocatalysis technology to polish membrane bioreactor(MBR) effluent, using 2,6-di-tert-butylphenol(2,6-DTBP) as a model soluble microbial product(SMP).2,6-DTBP is...This study aimed to explore a new degradation method-photocatalysis technology to polish membrane bioreactor(MBR) effluent, using 2,6-di-tert-butylphenol(2,6-DTBP) as a model soluble microbial product(SMP).2,6-DTBP is one of the predominant SMPs in MBR effluent, which is refractory and difficult to biodegrade.This study developed a novel carboxylated graphene oxide/titanium dioxide/silver(GO-COOH/TiO2/Ag) nanocomposite to photodegrade 2,6-DTBP.GO-COOH/TiO2/Ag was successfully synthesized, using L-cysteine as the linker bonding TiO2/Ag to GO-COOH.The structural, morphological and optical properties of the GO-COOH/TiO2/Ag nanocomposite were characterized using various techniques.Owing to synergistic effects, the GO-COOH/TiO2/Ag nanocomposite exhibited enhanced photocatalytic degradation performance under solar light irradiation when compared to TiO2, Ag and GO-COOH.To remove 25 mg/L 2,6-DTBP, the reaction time for GOCOOH/TiO2/Ag was only 30 min, faster than the 90 min required for pure TiO2 or Ag.In addition, the 200 mg/L GO-COOH/TiO2/Ag nanocomposite aqueous solution showed the best performance under solar light, with 99% removal of 2,6-DTBP.This enhanced capability is likely due to the surface plasmon resonance(SPR) effect contributed by Ag nanoparticles(NPs) doped onto the TiO2.In addition, GO-COOH had a high effective surface area, which assisted in degrading the 2,6-DTBP through improved adsorption.The stability study showed that the photocatalytic activity of the GO-COOH/TiO2/Ag was stable enough for recycling multiple times.The effective degradation performance and excellent stability demonstrates that the GO-COOH/TiO2/Ag nanocomposite can be a promising photocatalyst in the field of effluent SMP photodegradation, which solves the problem of the difficult biodegradation of highly toxic 2,6-DTBP.展开更多
A new anatase/SiO2 nanocomposite was synthesized by sol-gel method at room temperature using titanium tetrachloride and tetraethylorthosilicate as raw materials. Characterization of the product was carried out by mean...A new anatase/SiO2 nanocomposite was synthesized by sol-gel method at room temperature using titanium tetrachloride and tetraethylorthosilicate as raw materials. Characterization of the product was carried out by means of X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) specific surface areas, Thermogravimetry analysis (TGA), Fourier transform infrared (FT-IR), and UV-vis absorption spectroscopy. Thermal phase transformation studies of composite were carried out up to 1100°C which showed the establishment of anatase TiO2 phase. The presence of some tetrahedral coordination of TiO2 species in SiO2 matrix was confirmed by UV-Vis study. The produced TiO2/SiO2 nanocomposite has good photocatalytic properties due to its anatase phase, existence of tetrahedral coordination of TiO2 in the SiO2 matrix and very large surface area. Furthermore, the synthesized anatase/SiO2 shows significant adsorption ability towards Congo Red (CR) azo dye in comparison with the pure commercial TiO2 which is known as Degussa, P25.展开更多
Fe_x(SiC_2 )_(1 - x) nanocomposites prepared by using mechanical alloying method were reported. The mi-crostructure character and magnetic properties of Fex (SiO_2) 1 - x nanocomposite samples with different Fe conten...Fe_x(SiC_2 )_(1 - x) nanocomposites prepared by using mechanical alloying method were reported. The mi-crostructure character and magnetic properties of Fex (SiO_2) 1 - x nanocomposite samples with different Fe content and different ball milling time were studied by using X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbauer spectroscopy, and Faraday magnetic balance in a wide temperature range. The results indicate that the mi-crostructure and magnetic properties are closely related to ball milling time and Fe content. When Fe content is less than 20 wt% , the sample after 80-h ball milling has very complex microstructure. Small α-Fe grains and Fe cluster are implanted in SiO2 matrix. And there are not only isolated α-Fe granular and Fe cluster, but also nanometer scaled sandwich network-like structure. Fex (SiO_2) 1 - x nanocomposite samples display a rich variety of physical and chemical properties as a result of their unique nanostructure, strong interface interaction and inter-osmosis effect in Fe-SiO_2 boundaries, and the grain size effect.展开更多
A lipophilic silica/metatitantic acid（denoted as Si O2/H2 TiO 3） nanocomposite was synthesized by hydrothermal reaction with surface-modified Si O2 as the lipophilic carrier. As-synthesized Si O2/H2 TiO 3nanocomposi...A lipophilic silica/metatitantic acid（denoted as Si O2/H2 TiO 3） nanocomposite was synthesized by hydrothermal reaction with surface-modified Si O2 as the lipophilic carrier. As-synthesized Si O2/H2 TiO 3nanocomposite was used as a catalyst to promote the aquathermolysis reaction of extra-heavy crude oil thereby facilitating the recovering from the deep reservoirs at lowered temperature. The catalytic performance of the as-synthesized Si O2/H2 TiO 3catalyst for the aquathermolysis reaction of the heavy oil at a moderate temperature of 150 °C was evaluated in relation to the structural characterizations by TEM,FTIR,XRD and FESEM as well as the determination of the specific surface area by N2adsorption–desorption method. Findings indicate that as-synthesized Si O2/H2 TiO 3nanocomposite exhibits an average size of about 20 nm as well as good lipophilicity and dispersibility in various organic solvents; and it shows good catalytic performance for the aquathermolysis reaction of the extra-heavy oil extracted from Shengli Oilfield of China. Namely,the assynthesized Si O2/H2 TiO 3catalyst is capable of significantly reducing the viscosity of the tested heavy oil from58,000 c P to 16,000 c P（referring to a viscosity reduction rate of 72.41%） at a mass fraction of 0.5%,a reaction temperature of 150 °C and a reaction time of 36 h,showing potential application in downhole upgrading heavy crude oils.展开更多
基金the financial support received from China Postdoctoral Science Foundation Funded Project(No.2018M641387).
文摘This study aimed to explore a new degradation method-photocatalysis technology to polish membrane bioreactor(MBR) effluent, using 2,6-di-tert-butylphenol(2,6-DTBP) as a model soluble microbial product(SMP).2,6-DTBP is one of the predominant SMPs in MBR effluent, which is refractory and difficult to biodegrade.This study developed a novel carboxylated graphene oxide/titanium dioxide/silver(GO-COOH/TiO2/Ag) nanocomposite to photodegrade 2,6-DTBP.GO-COOH/TiO2/Ag was successfully synthesized, using L-cysteine as the linker bonding TiO2/Ag to GO-COOH.The structural, morphological and optical properties of the GO-COOH/TiO2/Ag nanocomposite were characterized using various techniques.Owing to synergistic effects, the GO-COOH/TiO2/Ag nanocomposite exhibited enhanced photocatalytic degradation performance under solar light irradiation when compared to TiO2, Ag and GO-COOH.To remove 25 mg/L 2,6-DTBP, the reaction time for GOCOOH/TiO2/Ag was only 30 min, faster than the 90 min required for pure TiO2 or Ag.In addition, the 200 mg/L GO-COOH/TiO2/Ag nanocomposite aqueous solution showed the best performance under solar light, with 99% removal of 2,6-DTBP.This enhanced capability is likely due to the surface plasmon resonance(SPR) effect contributed by Ag nanoparticles(NPs) doped onto the TiO2.In addition, GO-COOH had a high effective surface area, which assisted in degrading the 2,6-DTBP through improved adsorption.The stability study showed that the photocatalytic activity of the GO-COOH/TiO2/Ag was stable enough for recycling multiple times.The effective degradation performance and excellent stability demonstrates that the GO-COOH/TiO2/Ag nanocomposite can be a promising photocatalyst in the field of effluent SMP photodegradation, which solves the problem of the difficult biodegradation of highly toxic 2,6-DTBP.
文摘A new anatase/SiO2 nanocomposite was synthesized by sol-gel method at room temperature using titanium tetrachloride and tetraethylorthosilicate as raw materials. Characterization of the product was carried out by means of X-ray diffraction (XRD), X-ray fluorescence spectroscopy (XRF), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET) specific surface areas, Thermogravimetry analysis (TGA), Fourier transform infrared (FT-IR), and UV-vis absorption spectroscopy. Thermal phase transformation studies of composite were carried out up to 1100°C which showed the establishment of anatase TiO2 phase. The presence of some tetrahedral coordination of TiO2 species in SiO2 matrix was confirmed by UV-Vis study. The produced TiO2/SiO2 nanocomposite has good photocatalytic properties due to its anatase phase, existence of tetrahedral coordination of TiO2 in the SiO2 matrix and very large surface area. Furthermore, the synthesized anatase/SiO2 shows significant adsorption ability towards Congo Red (CR) azo dye in comparison with the pure commercial TiO2 which is known as Degussa, P25.
基金Project supported by the Foundation of State ScienceTechnology Commission of China the Natural Science Foundation of Anhui Province
文摘Fe_x(SiC_2 )_(1 - x) nanocomposites prepared by using mechanical alloying method were reported. The mi-crostructure character and magnetic properties of Fex (SiO_2) 1 - x nanocomposite samples with different Fe content and different ball milling time were studied by using X-ray diffraction (XRD), transmission electron microscopy (TEM), Mossbauer spectroscopy, and Faraday magnetic balance in a wide temperature range. The results indicate that the mi-crostructure and magnetic properties are closely related to ball milling time and Fe content. When Fe content is less than 20 wt% , the sample after 80-h ball milling has very complex microstructure. Small α-Fe grains and Fe cluster are implanted in SiO2 matrix. And there are not only isolated α-Fe granular and Fe cluster, but also nanometer scaled sandwich network-like structure. Fex (SiO_2) 1 - x nanocomposite samples display a rich variety of physical and chemical properties as a result of their unique nanostructure, strong interface interaction and inter-osmosis effect in Fe-SiO_2 boundaries, and the grain size effect.
基金supported by the National Natural Science Foundation of China (grant Nos.21371047 and 21471047)
文摘A lipophilic silica/metatitantic acid（denoted as Si O2/H2 TiO 3） nanocomposite was synthesized by hydrothermal reaction with surface-modified Si O2 as the lipophilic carrier. As-synthesized Si O2/H2 TiO 3nanocomposite was used as a catalyst to promote the aquathermolysis reaction of extra-heavy crude oil thereby facilitating the recovering from the deep reservoirs at lowered temperature. The catalytic performance of the as-synthesized Si O2/H2 TiO 3catalyst for the aquathermolysis reaction of the heavy oil at a moderate temperature of 150 °C was evaluated in relation to the structural characterizations by TEM,FTIR,XRD and FESEM as well as the determination of the specific surface area by N2adsorption–desorption method. Findings indicate that as-synthesized Si O2/H2 TiO 3nanocomposite exhibits an average size of about 20 nm as well as good lipophilicity and dispersibility in various organic solvents; and it shows good catalytic performance for the aquathermolysis reaction of the extra-heavy oil extracted from Shengli Oilfield of China. Namely,the assynthesized Si O2/H2 TiO 3catalyst is capable of significantly reducing the viscosity of the tested heavy oil from58,000 c P to 16,000 c P（referring to a viscosity reduction rate of 72.41%） at a mass fraction of 0.5%,a reaction temperature of 150 °C and a reaction time of 36 h,showing potential application in downhole upgrading heavy crude oils.
