A new linear yield criterion expressed by the geometric midline of error triangle between Tresca and Twin shear stress yield loci on the π-plane in Haigh-Westergaard space was introduced. The criterion was written in...A new linear yield criterion expressed by the geometric midline of error triangle between Tresca and Twin shear stress yield loci on the π-plane in Haigh-Westergaard space was introduced. The criterion was written in terms of the values of principal stress deviator and called GM yield criterion for short. Together with a Cartesian coordinate velocity field instead of the Avitzur＇s, the GM criterion was used to obtain an analytical solution for strip drawing. With a working example of the strip drawing through wedge-shaped die, the results of relative drawing stress calculated by the GM criterion were compared with those calculated by Mises＇ criterion from Avitzur formula. It indicated that the calculated results according to analytical solution were in good agreement with the numerical solution obtained from Avitzur formula.展开更多
Soil erosion induced by inappropriate tillage remains a serious problem on many agricultural fields in the humid tropics. Studies were conducted between 2004 and 2006, on an Alfisol in Ogbomoso in the Southern Guinea ...Soil erosion induced by inappropriate tillage remains a serious problem on many agricultural fields in the humid tropics. Studies were conducted between 2004 and 2006, on an Alfisol in Ogbomoso in the Southern Guinea Savanna of Nigeria to evaluate the effectiveness of Vetiver Grass(Vetiveria nigritana) Strips(VGS) under different tillage systems. The experiment was split-plot laid out in a randomized complete block design with two replications on 6% slope with 18 runoff plots. Main plot treatments were tillage systems; Manual Clearing(MC), Ploughing(P) and Ploughing plus Harrowing(PH). Subplot treatments were VGS spaced at intervals of 5 m(eight strips) and 10 m(four strips) with the control(no-vetiver). Runoffs and soil losses were collected after each major storm. Chemical analyses of eroded sediments and runoff were determined. Data were analyzed using ANOVA at p<0.05. The results showed that tillage had no significant reduction in runoffs and soil losses, but they were reduced with MC compared with P and PH. Mean total runoff on 5 and 10 m VGS plots were significantly(p<0.05) lower than that of the control by 74.4% and 45.0%, respectively. Corresponding soils loss on 5 and 10 m VGS plots were 27.1% and 53.5%, respectively. Mean NO3-N levels in runoff water were lower under PH plots than those under MC plots by 79.0% and 66.5%, respectively in 2004 and 2006 growing seasons. VGS spaced at 5 m significantly(p<0.05) reduced NO3-N loss than the control by 108.8% in 2004. Nutrients loads of eroded sediments were consistently higher for the control(no-vetiver) plots and least for 5 m VGS plot. Carbon, nitrogen and phosphorus contents of eroded sediments were 90%-92.4%, 83%-83.6% and 97%-97.8%, respectively, and were lower on 5 m than other treatments. Maize grain yield was significantly(p<0.05) affected by both tillage and VGS spacing only in 2005 growing season. P plot produced higher grain yield than MC and PH by 79.9% and 99.1%, respectively. Also, grain yield on VGS plot was significantly(p<0.05) higher on 5 and 10 m VGS plots than the control by 82.2% and 85.4%, respectively. The significant beneficial effect of PH in producing higher yields was dwarfed by the potential danger of soil erosion in the absence of a soil erosion control measure. The results showed that a balance needed to be struck between mechanical clearance and protective measure against soil erosion.展开更多
为探究稻茬小麦深施肥“一基一追”机艺融合技术的增产增效减排机制,2021—2024年在长江下游南通稻茬麦区开展大田试验。试验采用缓释掺混肥料(SRF,N∶P_(2)O_(5)∶K_(2)O=26∶12∶12)和普通尿素(U,46%N),结合自主研发的2BFGK-12(6)260...为探究稻茬小麦深施肥“一基一追”机艺融合技术的增产增效减排机制,2021—2024年在长江下游南通稻茬麦区开展大田试验。试验采用缓释掺混肥料(SRF,N∶P_(2)O_(5)∶K_(2)O=26∶12∶12)和普通尿素(U,46%N),结合自主研发的2BFGK-12(6)260全秸秆茬地洁区旋耕智能施肥播种机和3ZF-4(200)中耕追肥机,设置7种施肥模式(30 cm+15 cm宽窄行种植):以尿素4次分施(N 240 kg hm^(-2),基肥∶分蘖肥∶拔节肥∶孕穗肥=5∶1∶2∶2,窄行基施,追肥全田撒施)为对照(CK);减氮15%(N 204 kg hm^(-2))条件下设置6种处理:M_(1)(100%SRF窄行基施);M_(2)(60%SRF窄行基施+40%U拔节期窄行撒施);M_(3)(60%SRF窄行基施+40%U返青期宽行条施);M_(4)(60%SRF窄行基施+40%SRF返青期窄行撒施);M_(5)(60%SRF窄行基施+40%SRF返青期宽行条施);M_(4+5)(60%SRF窄行基施+20%SRF返青期宽行条施+20%SRF返青期窄行撒施)。研究比较不同施肥模式对小麦产量效益、根系形态生理、氮素利用效率及N_(2)O排放的影响。结果表明,与CK相比,M_(2)~M_(5)处理提高了小麦产量(4.0%~19.0%)和经济效益(13.7%~35.7%),其中M_(4)和M_(5)处理表现最优,分别增产14.1%和19.0%,经济效益提升34.5%和35.7%。这些处理明显改善了根系特性(根干重密度增加9.7%~111.8%,根系活力和氧化力分别提高6.8%~52.0%和4.2%~44.2%),降低N_(2)O累积排放量22.6%~34.5%,提高0~20 cm土层硝态氮含量11.2%~40.0%。在氮素利用方面,M_(2)~M_(5)处理均提高了籽粒氮素积累量、花后氮素积累量及其对籽粒氮素的贡献率,氮肥利用效率指标(包括偏生产力、农学效率和表观利用率)分别显著提升了22.4%~40.0%、29.7%~74.3%和9.41~18.77个百分点。值得注意的是,M_(4)和M_(5)处理表现出最优的综合效益:N_(2)O累积排放量降幅最大(分别达27.0%和34.5%),氮肥表观利用率2季均维持在43.0%以上(均值分别为43.5%和46.8%),同时在生育后期保持较高的根系活性和耕层无机氮含量。相比之下,M_(1)处理虽然实现了最大的N_(2)O减排效果(降幅35.9%),但导致减产10.4%和经济效益下降10.8%,且氮肥利用效率呈现不稳定的年际变化特征。而优化处理M_(4+5)进一步改善了根系形态生理特性,并提高氮肥表观利用率和籽粒氮素积累量。综上,减氮15%条件下(N 204 kg hm^(-2)),缓混肥2次施用处理(M_(4)和M_(5))能实现产量、经济效益、氮肥利用效率和N_(2)O减排的协同提高,并以追肥深施处理(M_(5))效应更强。本研究为稻茬小麦缓释肥减氮优化高效应用提供重要理论依据。展开更多
The Steckel mill,a long established solution for the economical production of relatively small volumes of hot rolled strip,has been rejuvenated in recent years by a range of new applications,boosted by the need of imp...The Steckel mill,a long established solution for the economical production of relatively small volumes of hot rolled strip,has been rejuvenated in recent years by a range of new applications,boosted by the need of improving the energetic efficiency of the rolling process.The traditional advantages of the Steckel mill in terms of flexibility and reduced capital and operational costs are now enhanced by technological developments that have significantly expanded its application range into the combined production of strip and plate and improved the product quality.The increased awareness of the necessity of a sustainable growth in the steel industry has stimulated the development of process solutions with an improved efficiency in the use of natural resources,lower carbon emissions and increased yield.Modern Steckel mills are an adequate response to the trend towards low energy strip and plate production,in particular in their plate-Steckel mill variant.Siemens VAI have played a key role in the innovation and transformation of the Steckel mill concept,with a number of recent installations,presented in this paper from the point of view of their contribution to the development of greener steel rolling technologies.展开更多
The weighted velocity field was simplified for analysis of hot strip rolling. Using the field and GM （geometric midline） yield criterion, the deformation power, friction power and shear power were obtained respectiv...The weighted velocity field was simplified for analysis of hot strip rolling. Using the field and GM （geometric midline） yield criterion, the deformation power, friction power and shear power were obtained respectively. Summing the partial power contributions, the total deformation power for strip rolling was presented. Then, by minimizing the power function, the rolling force was obtained; meanwhile, considering the effect of roll elastic flattening, iterative calculation of the roll radius was carried out until the radius was convergent. On line data were corn pared with the calculated results to verify the model accuracy. It was indicated that the calculated rolling forces were basically in agreement with the measured ones since the maximum error was less than 10.0%. Moreover, the effects of various rolling conditions such as thickness reduction, friction factor and shape factor, upon separating force, location of neutral angle, and stress state coefficient were discussed systematically.展开更多
基金Item Sponsored by National Natural Science Foundation of China(50474015)
文摘A new linear yield criterion expressed by the geometric midline of error triangle between Tresca and Twin shear stress yield loci on the π-plane in Haigh-Westergaard space was introduced. The criterion was written in terms of the values of principal stress deviator and called GM yield criterion for short. Together with a Cartesian coordinate velocity field instead of the Avitzur＇s, the GM criterion was used to obtain an analytical solution for strip drawing. With a working example of the strip drawing through wedge-shaped die, the results of relative drawing stress calculated by the GM criterion were compared with those calculated by Mises＇ criterion from Avitzur formula. It indicated that the calculated results according to analytical solution were in good agreement with the numerical solution obtained from Avitzur formula.
文摘Soil erosion induced by inappropriate tillage remains a serious problem on many agricultural fields in the humid tropics. Studies were conducted between 2004 and 2006, on an Alfisol in Ogbomoso in the Southern Guinea Savanna of Nigeria to evaluate the effectiveness of Vetiver Grass(Vetiveria nigritana) Strips(VGS) under different tillage systems. The experiment was split-plot laid out in a randomized complete block design with two replications on 6% slope with 18 runoff plots. Main plot treatments were tillage systems; Manual Clearing(MC), Ploughing(P) and Ploughing plus Harrowing(PH). Subplot treatments were VGS spaced at intervals of 5 m(eight strips) and 10 m(four strips) with the control(no-vetiver). Runoffs and soil losses were collected after each major storm. Chemical analyses of eroded sediments and runoff were determined. Data were analyzed using ANOVA at p<0.05. The results showed that tillage had no significant reduction in runoffs and soil losses, but they were reduced with MC compared with P and PH. Mean total runoff on 5 and 10 m VGS plots were significantly(p<0.05) lower than that of the control by 74.4% and 45.0%, respectively. Corresponding soils loss on 5 and 10 m VGS plots were 27.1% and 53.5%, respectively. Mean NO3-N levels in runoff water were lower under PH plots than those under MC plots by 79.0% and 66.5%, respectively in 2004 and 2006 growing seasons. VGS spaced at 5 m significantly(p<0.05) reduced NO3-N loss than the control by 108.8% in 2004. Nutrients loads of eroded sediments were consistently higher for the control(no-vetiver) plots and least for 5 m VGS plot. Carbon, nitrogen and phosphorus contents of eroded sediments were 90%-92.4%, 83%-83.6% and 97%-97.8%, respectively, and were lower on 5 m than other treatments. Maize grain yield was significantly(p<0.05) affected by both tillage and VGS spacing only in 2005 growing season. P plot produced higher grain yield than MC and PH by 79.9% and 99.1%, respectively. Also, grain yield on VGS plot was significantly(p<0.05) higher on 5 and 10 m VGS plots than the control by 82.2% and 85.4%, respectively. The significant beneficial effect of PH in producing higher yields was dwarfed by the potential danger of soil erosion in the absence of a soil erosion control measure. The results showed that a balance needed to be struck between mechanical clearance and protective measure against soil erosion.
文摘为探究稻茬小麦深施肥“一基一追”机艺融合技术的增产增效减排机制,2021—2024年在长江下游南通稻茬麦区开展大田试验。试验采用缓释掺混肥料(SRF,N∶P_(2)O_(5)∶K_(2)O=26∶12∶12)和普通尿素(U,46%N),结合自主研发的2BFGK-12(6)260全秸秆茬地洁区旋耕智能施肥播种机和3ZF-4(200)中耕追肥机,设置7种施肥模式(30 cm+15 cm宽窄行种植):以尿素4次分施(N 240 kg hm^(-2),基肥∶分蘖肥∶拔节肥∶孕穗肥=5∶1∶2∶2,窄行基施,追肥全田撒施)为对照(CK);减氮15%(N 204 kg hm^(-2))条件下设置6种处理:M_(1)(100%SRF窄行基施);M_(2)(60%SRF窄行基施+40%U拔节期窄行撒施);M_(3)(60%SRF窄行基施+40%U返青期宽行条施);M_(4)(60%SRF窄行基施+40%SRF返青期窄行撒施);M_(5)(60%SRF窄行基施+40%SRF返青期宽行条施);M_(4+5)(60%SRF窄行基施+20%SRF返青期宽行条施+20%SRF返青期窄行撒施)。研究比较不同施肥模式对小麦产量效益、根系形态生理、氮素利用效率及N_(2)O排放的影响。结果表明,与CK相比,M_(2)~M_(5)处理提高了小麦产量(4.0%~19.0%)和经济效益(13.7%~35.7%),其中M_(4)和M_(5)处理表现最优,分别增产14.1%和19.0%,经济效益提升34.5%和35.7%。这些处理明显改善了根系特性(根干重密度增加9.7%~111.8%,根系活力和氧化力分别提高6.8%~52.0%和4.2%~44.2%),降低N_(2)O累积排放量22.6%~34.5%,提高0~20 cm土层硝态氮含量11.2%~40.0%。在氮素利用方面,M_(2)~M_(5)处理均提高了籽粒氮素积累量、花后氮素积累量及其对籽粒氮素的贡献率,氮肥利用效率指标(包括偏生产力、农学效率和表观利用率)分别显著提升了22.4%~40.0%、29.7%~74.3%和9.41~18.77个百分点。值得注意的是,M_(4)和M_(5)处理表现出最优的综合效益:N_(2)O累积排放量降幅最大(分别达27.0%和34.5%),氮肥表观利用率2季均维持在43.0%以上(均值分别为43.5%和46.8%),同时在生育后期保持较高的根系活性和耕层无机氮含量。相比之下,M_(1)处理虽然实现了最大的N_(2)O减排效果(降幅35.9%),但导致减产10.4%和经济效益下降10.8%,且氮肥利用效率呈现不稳定的年际变化特征。而优化处理M_(4+5)进一步改善了根系形态生理特性,并提高氮肥表观利用率和籽粒氮素积累量。综上,减氮15%条件下(N 204 kg hm^(-2)),缓混肥2次施用处理(M_(4)和M_(5))能实现产量、经济效益、氮肥利用效率和N_(2)O减排的协同提高,并以追肥深施处理(M_(5))效应更强。本研究为稻茬小麦缓释肥减氮优化高效应用提供重要理论依据。
文摘The Steckel mill,a long established solution for the economical production of relatively small volumes of hot rolled strip,has been rejuvenated in recent years by a range of new applications,boosted by the need of improving the energetic efficiency of the rolling process.The traditional advantages of the Steckel mill in terms of flexibility and reduced capital and operational costs are now enhanced by technological developments that have significantly expanded its application range into the combined production of strip and plate and improved the product quality.The increased awareness of the necessity of a sustainable growth in the steel industry has stimulated the development of process solutions with an improved efficiency in the use of natural resources,lower carbon emissions and increased yield.Modern Steckel mills are an adequate response to the trend towards low energy strip and plate production,in particular in their plate-Steckel mill variant.Siemens VAI have played a key role in the innovation and transformation of the Steckel mill concept,with a number of recent installations,presented in this paper from the point of view of their contribution to the development of greener steel rolling technologies.
基金Item Sponsored by National Natural Science Foundation of China(51074052,50734002)
文摘The weighted velocity field was simplified for analysis of hot strip rolling. Using the field and GM （geometric midline） yield criterion, the deformation power, friction power and shear power were obtained respectively. Summing the partial power contributions, the total deformation power for strip rolling was presented. Then, by minimizing the power function, the rolling force was obtained; meanwhile, considering the effect of roll elastic flattening, iterative calculation of the roll radius was carried out until the radius was convergent. On line data were corn pared with the calculated results to verify the model accuracy. It was indicated that the calculated rolling forces were basically in agreement with the measured ones since the maximum error was less than 10.0%. Moreover, the effects of various rolling conditions such as thickness reduction, friction factor and shape factor, upon separating force, location of neutral angle, and stress state coefficient were discussed systematically.
