期刊文献+

基于氮化钛的全固态碱性pH电极的研制 被引量:5

A Novel pH Electrode Based on Titanium Nitride
在线阅读 下载PDF
导出
摘要 Titanium nitride was recommended as pH-sensitive materials to fabricate pH sensors. The TiN electrode studied in this paper showed a linear response in the pH range of 11-14 with a response slope of -60 mV/pH. The correlation coefficient was 0.998. The response time of the electrode was about 1 min. It exhibits some advantages over the glass pH electrode in more rigid structure and better selectivity toward cations of alkali metals, effectively overcoming the interference of Na + in high pH solution. No interferences from commonly accompanying cations and anions were observed. The electrode also showed a high stability and a good reproducibility. The potential drift was less than 2 mV as measured in pH 13.5 and 14 solution for 2 h. When the electrode was alternately measured in the solution of pH 13.5 and 14 solution, the relative standard deviation estimated for six measurements were about 0.27% and 0.29%, respectively. In addition, the electrode was performed excellently in corrosion medium containing F -. The lifetime of the electrode was over 3 months. Titanium nitride was recommended as pH-sensitive materials to fabricate pH sensors. The TiN electrode studied in this paper showed a linear response in the pH range of 11-14 with a response slope of -60 mV/pH. The correlation coefficient was 0.998. The response time of the electrode was about 1 min. It exhibits some advantages over the glass pH electrode in more rigid structure and better selectivity toward cations of alkali metals, effectively overcoming the interference of Na + in high pH solution. No interferences from commonly accompanying cations and anions were observed. The electrode also showed a high stability and a good reproducibility. The potential drift was less than 2 mV as measured in pH 13.5 and 14 solution for 2 h. When the electrode was alternately measured in the solution of pH 13.5 and 14 solution, the relative standard deviation estimated for six measurements were about 0.27% and 0.29%, respectively. In addition, the electrode was performed excellently in corrosion medium containing F -. The lifetime of the electrode was over 3 months.
出处 《高等学校化学学报》 SCIE EI CAS CSCD 北大核心 2003年第8期1400-1402,共3页 Chemical Journal of Chinese Universities
关键词 氮化钛 全固态碱性pH电极 研制 PH值 化学传感器 制备 pH electrode Titanium nitride pH measurement
  • 相关文献

参考文献1

二级参考文献2

共引文献3

同被引文献73

引证文献5

二级引证文献13

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部