期刊文献+

交流磁场下7075铝合金液相线和固相线温度变化 被引量:6

Influences of an Alternate Magnetic Field on the Liquidus and Solidus Temperatures of 7075 Al Alloy
在线阅读 下载PDF
导出
摘要 在7075铝合金凝固过程中施加频率为50Hz的交流磁场,磁场强度的变化范围为0 06T,0 09T,0 12T·运用双电桥法分别测定了上述凝固过程的电阻 温度曲线,确定了合金在不同磁场条件下凝固的液相线和固相线温度·实验结果表明:在交流磁场中凝固的合金,其液相线和固相线温度均明显提高,并且结晶温度间隔变小,磁场强度越大,这种变化越明显·与未加磁场的合金相比,经交变磁场处理后的合金,其液相线温度上升了7 5~12 5℃,固相线温度升高了10~20℃·交流磁场作用改变了固液界面前沿液相中的原子团簇向固相跳动时所需克服的势垒,最终导致合金熔点的改变· ?Solification of 7075 Al alloy was investigated in an alternate magnetic field with frequency being 50?Hz and density being 006?T, 009?T and 012?T,respectively. The ResistanceTemperature curves of the solidifications were measured with the method of double bridges to examine the liquidus and solidus temperatures of the alloy under different conditions. It is found through the experiments that, when the alloy is solidified in an alternate magnetic field, its liquidus and solidus temperatures increase obviously and the solidification interval diminishes. The stronger the magnetic density is, the more evident the effects are. Compared with the alloy solidified without a magnetic field,the liquidus temperature increases 75~125?℃ and the solidus temperature increases 10~20?℃ by the alternate magnetic filed. It is suggested that the barrier potential required by the atom cluster jumping from liquid phase to solid phase at the front of liquidsolid interface is decreased by the alternate magnetic filed.
出处 《东北大学学报(自然科学版)》 EI CAS CSCD 北大核心 2003年第5期482-484,共3页 Journal of Northeastern University(Natural Science)
基金 国家重点基础研究发展规划项目(G199906490501)
关键词 交流磁场 液相线 固相线 原子团簇 铝合金 alternate magnetic field liquidus solidus,atom cluster Al alloy
  • 相关文献

参考文献10

  • 1王广厚.团簇物理的新进展(Ⅰ)[J].物理学进展,1994,14(2):121-172. 被引量:103
  • 2陈洪荪.金属物理性能及测试方法[M].北京:冶金工业出版社,1987.434.
  • 3Vives C. Solidification of Tin in the presence of electric and magnetic field[J]. J Cryst Growth, 1986,76(1): 170 -184.
  • 4Vives C. Electromagnetic refining of aluminum alloys by the CREM process: part I. working principle and metallurgical results[J]. Metall Trans B, 1989, 20B(5) :623 - 629.
  • 5Wu X Q, Zhan Q, Yang Y S, et al. The effect of electromagnetic stirring during solidification of the structure of Al-Si alloys[J ]. J Mater Sci Lett, 1998,17 (8) : 1403 -1405.
  • 6Ahmed S, Bond R, McKarman E. Solidification processing superalloys in an electric field[J ]. Adv Mater Proc, 1991,140(4) :30 - 32.
  • 7Radial A, Miwa K. Effect of intensity and frequency of electromagnetic vibration on the microstructural refinement of hypoeutectic Al-Si alloys[J]. Metall Trans A, 2000,31A(3) :755 - 762.
  • 8Li J M, Li S L, Li J, et al. Modification of solidification structure by pulse electric discharging [ J ]. Scr Metall Mater, 1994,31 (12) ~ 1691 - 1694.
  • 9Bamak J P,Sprecher A F,Conrad H. Colony size reduction in eutectic Pb-Sn casting by electropulsing [ J ]. Scr Metall Mater, 1995,3246) :879 - 884.
  • 10Zi B T, Ba Q X, Cui J Z, et al. Study on axial changes of as-cast structures of Al-alloy sample treated by the novel SPMF technique[J]. Scr Mater, 2000.43(4) :377 - 380.

二级参考文献2

共引文献103

同被引文献59

引证文献6

二级引证文献26

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部