期刊文献+

固化程度对氰酸酯-酚醛环氧树脂共混物热/湿热性能的影响 被引量:2

Effects of curing degree on thermal/ hot-wet properties of dicyanate-epoxy novolac resin blends
在线阅读 下载PDF
导出
摘要 论文研究了具有不同固化程度的双酚 A二氰酸酯 -酚醛环氧树脂共混物的 Tg转变和后固化过程中 Tg 转变的变化以及共混物的吸湿规律和湿热老化对共混物结构的影响。结果表明 ,固化程度可显著影响固化物的 Tg 和后固化过程中剩余反应的温度。表观转化率提高 ,则吸湿性降低 ;固化程度越大 ,湿热老化对化学结构影响越小 ,但当固化转化率不高时 (例如小于 90 % ) 。 The dicyanate epoxy novolac resin blends with controlled curing edegree were prepared.The results revealed by modulated DSC shows that the curing degree has drastic effect on glass transition temperature and its evolution during the post cure process.The water take up decreases with the cure extent of the blend. Long time hygrothermal ageing may have significant effects on the structure of the blend when the cure extent is not sufficiently high.
出处 《绝缘材料》 CAS 北大核心 2003年第2期41-43,47,共4页 Insulating Materials
基金 广东省自然科学基金项目 (0 0 0 5 11)
关键词 氰酸酯-酚醛环氧树脂共混物 固化程度 热/湿热性能 绝缘材料 dicyanate novolac epoxy resin curing degree hot wet property
  • 相关文献

参考文献1

二级参考文献21

  • 1[1]Hamerton I. Chemistry and Technology of Cyanate Ester Resins [M]. Glasgow: Chapman and Hall, 1994.
  • 2[2]Fang T, Shimp D A. Polycyanate esters: Science and applications [J]. Prog Polym Sci, 1995, 20, 61-118.
  • 3[3]Hamerton I. In: Dyson R W, ed. Specialty Polymers (Second edition) [M]. Glasgow: Blackie Academic and Professional, 1998.
  • 4[4]Hamerton I, Hay J H. Recent technological developments in cyanate ester resins [J]. High Perform Polym, 1998, 10: 163-174.
  • 5[5]Hamerton I, Hay J H. Recent developments in the chemistry cyanate ester resins [J]. Polym Int, 1998, 47: 465-473.
  • 6[6]Bauer M, Tanzer W, Much H, et al. Reactions of polyfunctional cyanuric acid esters with polyfunctional glycidylether I: Identification [J]. Acta Polym, 1989, 40(5): 335-340.
  • 7[7]Bauer M, Bauer J, Ruhaman R, et al. Reactions of polyfunctional cyanuric acid esters with polyfunctional glycidylether II: Reaction model [J]. Acta Polym, 1989, 40(6): 395-401.
  • 8[8]Bauer M, Bauer J. Networks from cyanic acid esters and glycidyl ethers [J]. Makromol Chem, Macromol Symp, 1989, 30: 1-11.
  • 9[9]Shimp D A, Wentworth J H. Cyanate Ester-Cured Epoxy Resin Structural Composites [J]. 37th Int SAMPE Symp, 1992, 37: 293-305.
  • 10[10]Grenier-Loustalot M F, Lartigau C. Influence of the stoichiometry of epoxy-cyanate systems (Non-catalyzed and catalyzed) on melten state reactivity [J]. J Polym Sci: Polym Chem Ed,1997, 35: 3101-3115.

共引文献24

同被引文献16

  • 1李英建,金子明,李华,吴春芝,钟蔚华.玄武岩纤维增强乙烯基酯树脂的抗弹性能研究[J].工程塑料应用,2006,34(9):5-7. 被引量:12
  • 2嵇培军,杨明,白树成,等.环氧树脂/双马树脂/氰酸酯共聚物复合材料性能研究[C].第十五届全国复合材料学术会议论文集,哈尔滨,2008:234-236.
  • 3嵇培军,欧秋仁,武玲,等.G814/9518改性氰酸酯复合材料性能的研究[C].2009年航天工艺信息网学术交流会议论文集,2009:179-182.
  • 4王志强,王婧婧,刘艳明,等.氰酸酯改性及复合材料性能[C].第十三届全国复合材料学术会议论文集.北京:航空工业出版社,2004:477-482.
  • 5Grenier Loustalot M F,Lartigan C.A study of the mechanisms and kinetics of the molten state reaction of non-catalyzed cyanate and epoxy-cyanate systems[J].Eur Polym J,1995,31(11):1139-1153.
  • 6Gerjon O,Galy J,Pascault J P.Isothermal curing of an uncatalyzed dicyanate ester monomer kinetics and modeling[J].J Appl Polym Sci,1993(49):1441-1452.
  • 7钟样屿,包建文,李晔.5528氰酸酯树脂及复合材料性能研究[C].第十五届全国复合材料学术会议论文集,哈尔滨,2008:237-240.
  • 8Sheng Hua Lu,Zhi Wei Zhou,Li Fang,et al.Preparation and properties of cyanate ester modified by epoxy resin and phenolic resin[J].Journal of Applied Polymer Science,2007,103(5):3150-3156.
  • 9曹海琳,郎海军,孟松鹤.连续玄武岩纤维结构与性能试验研究[J].高科技纤维与应用,2007,32(5):8-13. 被引量:55
  • 10郑劲东,张兴刚,杨勇.连续玄武岩纤维及其复合材料研究[J].玻璃钢/复合材料,2009(1):31-33. 被引量:25

引证文献2

二级引证文献7

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部