期刊文献+

爆炸喷涂NiCrAlY涂层的高温抗氧化行为 被引量:18

HIGH-TEMPERATURE OXIDATION RESISTANCE OF DS NiCrAlY COATING
在线阅读 下载PDF
导出
摘要 利用XRD,SEM和EDS检测了爆炸喷涂NiCrAlY涂层的高温氧化行为.结果表明,涂层1050℃恒温氧化动力学曲线符合抛物线规律,涂层表面生成Al203保护膜.氧化300 h,表面氧化膜基本保持完好,涂层/基体界面无开裂,基体表层出现铝与氮的化合物.与不加涂层的单晶镍基高温合金基体比较,爆炸喷涂的NiCrAlY涂层高温抗氧化能力明显增强. The oxidation behavior of detonation gun sprayed (DS) NiCrAlY coating at 1050 degreesC was evaluated by means of XRD, SEM and EDS. The results show that oxidation kinetic curve of DS NiCrAlY coating obeys the parabolic law. The Al2O3 protective scale is formed at coating surface. After oxidation for 300 h, the surface oxide scale keeps almost intact and no crack is found at the interface of coating and substrate. The oxidation resistance of DS NiCrAlY coating is evidently better than that of the naked substrate, a single crystal Ni-base superalloy. There are Al-N compounds appearing in the undersurface area of substrate.
出处 《金属学报》 SCIE EI CAS CSCD 北大核心 2003年第2期189-192,共4页 Acta Metallurgica Sinica
关键词 爆炸喷涂 NICRALY涂层 抗氧化能力 氧化膜 高温氧化 detonation gun spray NiCrAlY coating oxidation resistance oxide scale
  • 相关文献

参考文献13

  • 1U S Pat, 2714563, 1955
  • 2U K Pat, 742387, 1955
  • 3Wang J, Zhang L, Sun B D, Zhou Y H. Surf Coat Technol,2000; 130:69
  • 4Smith R W. Powder Metall Int, 1991; 23:147
  • 5Kembaiyam K T, Keshavan K. Wear, 1995; 186-187:487
  • 6Parker D W. Adv Mater Proc, 1991; 139:68
  • 7Kharlamov Y A. Thin Solid Films, 1978; 54:271
  • 8张玉娟,孙晓峰,金涛,韩松,段绪海,赵乃仁,管恒荣,胡壮麒.爆炸喷涂NiCrAlTaY涂层的微观组织分析[J].金属学报,2003,39(2):185-188. 被引量:10
  • 9Kear B H, Pettit F S, Fornwalt D E, Lemaire L P. Oxid Met, 1971; 3:557
  • 10Tawancy H M, Sridhar N. Oxid Met, 1992; 37:143

二级参考文献12

  • 1Kadyrov V, Margarita Y, Sen D, Rao D S, Rao K P,Saibara A V. Trans Powder Metall (India), 1993; 20:1
  • 2Zhang A B, Liu R Y. Symp National Int Proseminar on Thermal Spraying Technology, Shenyang, 1998:154(张爱斌,刘若愚.全国热喷涂技术交流研讨会论文集,沈阳,1998: 154)
  • 3Kharlamov Y A. Mater Sci Eng, 1987; 93:1
  • 4vip C J S. Trans IMF, 1986; 64:33
  • 5Kharlamov Y U. Soy Powder Metall Met Ceram, 1974;13:820
  • 6Saravanan P, Selarajan V, Rao D S, Joshi S V, Sundararajan G. Mater Manuf Proc, 2000; 15:139
  • 7Gill B J, Tucker R C Jr. Mater Sci Technol, 1986; 2:207
  • 8Bose S, DeMashi-Marcin J. J Thermal Spray Technol,1997; 6:99
  • 9Rhys-Jones T N. Conf on Mater Develop in Furborechinery Design, The Institute of Metals, Churchill College,Combridge, UK, 1988
  • 10Ramous E, Zambon A, Magrini M, Badan B, Bianco M.Surf Eng, 1997; 13:310

共引文献9

同被引文献171

引证文献18

二级引证文献86

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部