期刊文献+

高匹配焊接接头不均匀体低周疲劳损伤研究 被引量:3

STUDY OF LOW CYCLE FATIGUE(LCF) DAMAGE ON THE MECHANICAL HETEROGENEITY MODEL OF OVERMATCHED WELDED JOINTS
在线阅读 下载PDF
导出
摘要 将高匹配的焊接接头抽象为软夹硬力学不均匀体 ,并运用材料应力幅的变化定义一个新的损伤变量 ,运用损伤力学的方法对高匹配的焊接接头力学不均匀体在低周疲劳载荷下的损伤行为进行研究。研究结果发现对于高匹配的焊接接头 ,在低周疲劳的载荷条件下 ,随着中间高强度的焊缝宽度的增加 ,焊接接头在断裂时的循环次数将下降 。 In the practice of engineering, there are many welding structures that fail to work as expected due to damages resulting from the effect of the low cycle fatigue (LCF). The damages accumulate till the structures are fractured.In this paper, the overmatched joint is abstracted as mechanical heterogeneity model with a newly defined continuum damage variable and then an experimental study is made of the welded joint's fatigue damage based on the material stress range. With this definition no additional equipment is needed for the experiment on the strain controlled LCF and it is made very convenient to determine the degrees of damage in the material by measuring the variations in the material's cycle stress range.The analysis is performed for soft hard soft specimens with three different weld widths, namely 3.1?mm, 4?mm and 7?mm respectively. The two soft zones are made of 16Mn steel whereas the hard zone in between is made of 45 steel.The results of the LCF experiments show that along with the increase of the welded width in the overmatched welded joint model, the number of cycling times tends to decrease and the damage develops faster in the welded joint.
出处 《机械强度》 CAS CSCD 北大核心 2002年第4期556-557,574,共3页 Journal of Mechanical Strength
基金 北京市自然科学基金 (2 972 0 0 7) 教育部优秀青年教师基金资助项目~~
关键词 低周疲劳 焊接接头 力学不均匀体 疲劳损伤 Welded joint Mechanical heterogeneity Fatigue damage
  • 相关文献

参考文献2

  • 1Jean Lemaitre, Jacques Dufailly. Damage measurements. Engineering Fracture Mechanics, 1987,28(5/6): 643 ~ 661.
  • 2Xiaohua Yang, Nian Li, Zhihao Jin, Tiejun Wang. A continuous low cycle fatigue damage model and its application in engineering materials. Int. J.Fatigue, 1997,19(10) :687 ~ 692.

同被引文献32

  • 1邹树梁,刘文君,王铁骊,陈甲华,刘兵.我国核电产业现状及其发展的战略思考[J].湖南社会科学,2005(1):104-108. 被引量:23
  • 2程光旭,楼志文,匡震邦.一种基于材料延性耗散模型的疲劳损伤研究方法[J].力学学报,1993,25(4):496-499. 被引量:13
  • 3王卫国,郑雯.12Cr1MoV钢低周疲劳损伤研究[J].材料科学与工艺,2005,13(2):193-195. 被引量:14
  • 4LemaitreJ 路迈西.损伤力学教程[M].北京:科学出版社,1996..
  • 5上海汽轮机厂,清华大学.电站设备大型转子焊接制造技术[M].北京:机械工业出版社,2009.
  • 6LI Changchun,QIAN Zhixiong,LI guangxia.The fatigue damage criterion and evolution equation containing material microparameters [J].Engineering Fracture Mechanics,1989,34(2):435-443.
  • 7CHENG Guangxu,LOU Zhiwen,KUANG Zhengbang.A new damage variable for low-cycle fatigue of metallic materials [J].Engineering Fracture Mechanics,1994,48(2):281 - 287.
  • 8YANG Xiaohua,LI Nian,JIN Zhihao,et al.Continuous low cycle fatigue damage model and its application in engineering materials [J].International Journal of Fatigue,1997,19(10):687 - 692.
  • 9Zaletelj H,Fajdiga G,Nagode M.Low cycle fatigue of welded joints with aging influence[J].Materials Science and Engineering:A,2013,564:478-484.
  • 10Okuya K,Kondo Y.The effect of large strain cycling on the fatigue strength of welded joint[J].Journal of ASTM International,2006,3(4):1-11.

引证文献3

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部