摘要
金刚石组合绳锯传统压胶条方式采用敲击方式,不仅人工消耗大,工作效率低,同时也会对设备轮体结构造成不可逆的伤害。为解决传统压胶条方式存在的问题,文章设计一种半自动压胶条装置,采用气缸对胶条进行压紧以及电机带动组合绳锯机工作轮转动的形式。通过两者对比,结果显示,金刚石组合绳锯半自动压胶条装置的使用可以使胶条安装效率提高50%以上。金刚石组合绳锯半自动压胶条装置能够进一步保证压胶质量,且大大提高工作效率,减少工人的劳动强度,从而较大程度降低使用成本及该项工作的操作难度与危险性,同时也奠定了该款产品的可行性。
The traditional rubber strip pressing method of diamond composite wire saw adopts knocking method,which not only consumes a lot of labor and has low working efficiency,but also causes irreversible damage to the wheel structure of the equipment.In order to solve the problem existing in the traditional adhesive tape pressing method,this paper designs a semi-automatic adhesive tape pressing device,which uses air cylinder to press the adhesive tape and motor to drive the working wheel of the combined wire saw machine to rotate.By comparing them,the result shows that the semi-automatic tape pressing device of diamond combination wire saw reduces the tape installation time by more than 50%.The semi-automatic rubber pressing device of diamond wire saw can further ensure the rubber pressing quality,greatly improve the working efficiency and reduce the labor intensity of workers,thus greatly reducing the use cost and the difficulty and danger of this work,and at the same time laying the foundation for the feasibility of this product.
作者
刘海洋
LIU Haiyang(Guilin Tebon Superhard Material Co.,Ltd.,Guilin 541004,China;Guangxi Key Laboratory of Superhard Materials,China Nonferrous Metals(Guilin)Geology and Mining Co.,Ltd.,Guilin 541004,China;National Engineering Technology Research Center for Special Mineral Materials,China Nonferrous Metals(Guilin)Geology and Mining Co.,Ltd.,Guilin 541004,China)
出处
《超硬材料工程》
CAS
2022年第5期32-36,共5页
Superhard Material Engineering
基金
金刚石绳锯串珠低压能耗高效烧结技术开发(桂林市重点研发计划2020010314)。
关键词
半自动压胶条装置
金刚石组合绳锯
气动压紧
电机传动
semi-automatic adhesive tape pressing device
diamond combination wire saw
pneumatic compaction
motor drive
