期刊文献+

磁场热处理对无取向硅钢二次退火过程的影响

Effect of magnetic field heat treatment on secondary annealing process of non-oriented silicon steel
在线阅读 下载PDF
导出
摘要 在无取向硅钢二次退火过程中施加磁场强度为0,0.010,0.015,0.020 T的脉冲磁场,研究脉冲磁场对无取向硅钢二次退火组织及织构的影响.实验结果表明:在二次退火过程中施加脉冲磁场,增加晶粒尺寸和有利织构,减少不利织构,提升磁性能.在频率为20 Hz,占空比为25%,磁场强度为0.010 T条件下效果最佳.试样的平均晶粒尺寸为37.18μm,较未施加磁场时增加15.90%;试样的有利织构{110}<001>强度为1.55,较未施加磁场时提高28.10%;不利织构{111}<112>强度为2.60,较未施加磁场降低17.69%;试样的铁损为5.208 W/kg,较未施加脉冲磁场时降低2.52%. During the secondary annealing of non-oriented silicon steel,a pulsed magnetic field with magnetic field intensity of 0,0.010,0.015 and 0.020 T was applied.The effect of pulsed magnetic field on the microstructure and texture of non-oriented silicon steel after secondary annealing was researched.The experimental result showed that grain size,favorable texture and magnetic properties were increased,and unfavorable texture was decreased during the secondary annealing.The result was the greatest in the pulsed magnetic field with the frequency of 20 Hz,duty cycle of 25%and magnetic field intensity of 0.010 T.The average grain size of the sample was 37.18μm,which was increased by 15.90%compared with that without magnetic field.Meanwhile,the strength of favorable texture{110}<001>of the sample was 1.55,which was increased by 28.10%compared with that without magnetic field;the strength of unfavorable texture{111}<112>was 2.60,which was reduced by 17.69%compared with that without magnetic field.The iron loss of the sample was 5.208 W/kg,which was 2.52%lower than that without the pulsed magnetic field.
作者 杨雪峰 李慧琴 刘宝志 张浩 张航 麻永林 YANG Xuefeng;LI Huiqin;LIU Baozhi;ZHANG Hao;ZHANG Hang;MA Yonglin(Materials and Metallurgy School(Rare Earth School),Inner Mongolia University of Science and Technology,Baotou 014010,China;Baotou Weifeng Rare Earth Electromagnetic Materials Co.,Ltd.,Baotou 014010,China)
出处 《内蒙古科技大学学报》 CAS 2022年第3期210-213,共4页 Journal of Inner Mongolia University of Science and Technology
基金 内蒙古自治区科技计划资助项目(2021GG0047) 内蒙古科技大学培育基金资助项目(2016CXY01).
关键词 无取向硅钢 磁场热处理 显微组织 织构 磁性能 non-oriented silicon steel magnetic field heat treatment microstructure texture magnetic properties
  • 相关文献

参考文献6

二级参考文献58

  • 1刘俊杰.残余应力对软磁材料磁性能的影响[J].航空兵器,2004,11(6):28-31. 被引量:12
  • 2赵宇,何忠治,翁宇庆,吴宝榕.电工钢中的晶界偏聚[J].钢铁研究学报,1995,7(1):66-73. 被引量:16
  • 3张文康,毛卫民,白志浩.退火温度对冷轧无取向硅钢组织结构和磁性能的影响[J].特殊钢,2006,27(1):15-17. 被引量:24
  • 4Molodov D A,Sheikh-Ali A D.Effect of magnetic field on texture evolution in titanium[J].Acta Mater,2004,52:4377-4383.
  • 5Sheikh-Ali A D,Molodov D A,Garmestani H.Magnetically induced texture development in zinc alloy sheet[J].Scripta Mater,2002,46:857-862.
  • 6Harada K,Tsurekawa S,Watanabe T,et al.Enhancement of homogeneity of grain boundary microstructure by magnetic annealing of electrodeposited nanocrystalline nickel[J].Scripta Mater,2003,49:367-372.
  • 7Hutchinson W B.Development of textures in recrystallization[J].Metal Sci J,1974,8:185-196.
  • 8Dillamore I L,Hutchinson W B.The control of grain size and orientation in sheet steel[J].Trans ISIJ,1974,11:877-883.
  • 9Martikainen H O,Lindroos V K.Observations on the effect of magnetic field on the recrystallization in ferrite[J].Scand J Metall,1981,10:3-8.
  • 10Watanabe T,Suzuki Y,Tanii S,et al.The effects of magnetic annealing on recrystallization and grain boundary character distribution (GBCD) in iron-cobalt alloy polycrystals[J].Philos Mag Lett,1990,62:9-17.

共引文献37

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部