摘要
采用φ(Ar)97%+φ(CO_(2))3%和φ(Ar)97.5%+φ(CO_(2))2.5%两种保护气体对厚12 mm的20Mn23AlV无磁钢板进行焊接,对比不同保护气体下20Mn23AlV无磁钢焊接接头的显微组织及力学性能。结果表明:采用φ(Ar)97.5%+φ(CO_(2))2.5%保护气体焊接的试板焊缝表面成形更优,焊缝内部气孔少;两种保护气体下的焊接接头都具有良好的塑性、韧性及抗拉强度,φ(Ar)97.5%+φ(CO_(2))2.5%保护气体下的接头的抗拉强度略大,焊缝组织为白色的奥氏体基体+δ铁素体。综合来看,采用φ(Ar)97.5%+φ(CO_(2))2.5%保护气体更为合理,满足无磁钢焊接生产要求。
The microstructure and mechanical properties of 20Mn23AlV non-magnetic steel plate with thickness of 12 mm are compared by welding with different shielding gases.The results show that the appearance of weld surface of the test plate welded with 97.5%Ar+2.5%CO_(2)shielding gas is better,and there are few pores in the weld.The welded joints with two kinds of shielding gases have good plasticity,toughness and tensile strength.The microstructure of the weld is white austenite matrix+δferrite.Using 97.5%Ar+2.5%CO_(2)shielding gas is reasonable and can meet the non-magnetic steel welding production requirements.
作者
陈丽园
郭瑞青
郝晓卫
侯金柱
孙逸凡
CHEN Liyuan;GUO Ruiqing;HAO Xiaowei;HOU Jinzhu;SUN Yifan(CRRC Tangshan Co.,Ltd.,Tangshan 063035,China;Dalian Jiaotong University,Dalian 116028,China)
出处
《电焊机》
2021年第4期86-89,I0007,共5页
Electric Welding Machine
