期刊文献+

FCC油浆的芳烃富集及COPNA树脂的合成 被引量:19

SEPARATION OF RICH AROMATIC COMPONENTS FCC SLURRIES WITH EXTRACTION AND SYSTHESIS OF COPNA RESIN
在线阅读 下载PDF
导出
摘要 以糠醛为溶剂对FCC油浆进行了萃取分离。考察了温度、剂油比对两种FCC油浆中富含芳烃组分 (糠醛抽出油 )组成和性质的影响。确定出油浆中芳烃富集的最佳萃取条件 :温度为 50℃ ,剂油比为 2。对比了不同油浆富含芳烃组分合成COPNA树脂的可行性。实验结果表明 ,环烷基油浆的糠醛抽出油的芳烃含量高于石蜡基油浆 。 Furfural was taken as an extracting solvent and used to separate aromatics from two kinds of fluid catalytic cracking slurries (FCC slurry). The properties and composition of the extracted components at different temperatures and ratios of solvent to slurries were investigated. The optimum conditions for the extractions of aromatics were determined, and the performances of enriched aromatic components extracted from two kinds of slurries were compared with each other. The experimental results show that the aromatic enriched components extracted from first kind of slurry is more favorable for the synthesis of COPNA resin than that of second kind of slurry.
出处 《石油大学学报(自然科学版)》 CSCD 北大核心 2002年第4期80-83,共4页 Journal of the University of Petroleum,China(Edition of Natural Science)
基金 中国石油化工集团公司资助项目 ( 9910 0 6 )
关键词 COPNA树脂 合成 FCC油浆 芳烃富集 糠醛 抽提 分离 合成 催化裂化 fluid catalytic cracking slurry aromatic enrichment furfural extraction separation synthesis resin
  • 相关文献

参考文献5

二级参考文献28

  • 1李书杰.催化裂化油浆制取二元族烃型橡胶增塑剂[J].石油炼制与化工,1994,25(1):19-25. 被引量:5
  • 2赵茜俊.重质芳烃油的利用途径[J].石油炼制与化工,1994,25(4):20-25. 被引量:12
  • 3王赣父,程国柱.催化裂化-芳烃抽提联合工艺的研究与工业试验[J].石油炼制与化工,1995,26(6):1-8. 被引量:19
  • 4郭天民.液-液萃取过程的模拟计算[J].化学工程,1982,10(5):1-11.
  • 5王纯 等.精馏塔的模拟计算[J].计算机与化工,1987,(4):12-12.
  • 6朱慎林 等.用NRTL方程计算芒烃抽提体系的液液平衡[J].石油化工,1985,(7):5-5.
  • 7唐勇.芳烃装置分离系统模拟分析软件APSS开发:硕士学位论文[M].青岛:青岛化工学院,1998..
  • 8刘奎武.强化大庆油蒸馏提高减压装置总拔出率研究.94国际石油与石油化工科技研讨会[M].北京,1994..
  • 9盛建业.-[J].石油炼制,1987,28(11):44-44.
  • 10刘奎武,94’国际石油与石油化工科技研讨会,1994年

共引文献66

同被引文献107

引证文献19

二级引证文献69

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部