摘要
采用流延–层叠–热压的方法制备了不同石墨界面层的层状ZrB_2-SiC-G超高温陶瓷,研究其在1300℃下氧化0.5~10 h的氧化行为以及氧化时间对室温残余强度的影响,观察了增重量随氧化时间的变化,并对其物相和形貌进行了分析。结果表明,石墨界面层中添加40vol%ZrB_2和10vol%SiC制备的层状ZrB_2-SiC-G超高温陶瓷,室温弯曲强度为670 MPa,断裂韧性为13.7 MPa·m^(1/2),氧化10 h后弯曲强度仍达429MPa,断裂韧性仍达10.25 MPa·m^(1/2),优异的残余强度是由于表面形成了致密的SiO_2玻璃层而阻止了材料内部被氧化。
The laminated ZrB2-SiC-G ultra high temperature ceramic with different graphite interface layers were successfully prepared by tap-casting-stacking-hot press. The oxidation behavior at 1300℃ for 0.5-10 h and the influence of oxidation time on residual strength at room temperature were studied. In addition, the gain weight along with the change of oxidation time was observed, and phase and morphology were analyzed. The results show that the laminated ZrB2-SiC-G ultra high temperature ceramic prepared by adding 40vol%ZrB2 and 10vol% SiC in the graphite interface layer obtains the best mechanical properties with room temperature flexural strength of 670 MPa and the fracture toughness of 13.7 MPa·m1/2. After 10 h oxidation, the flexural strength is still up to 429 MPa, and the fracture toughness is still up to 10.25 MPa·m1/2. The excellent residual strength is attributed to the formation of a dense glass layer of SiO2 on the surface which prevents the internal material from being oxidized.
出处
《无机材料学报》
SCIE
EI
CAS
CSCD
北大核心
2017年第9期961-966,共6页
Journal of Inorganic Materials
基金
山东省自然科学基金(ZR2014JL032)
山东省科技发展计划项目(2014GZX201008
2011SJGZ10)~~
关键词
ZRB2
层状陶瓷
氧化
残余强度
ZrB2 Laminated ceramics oxidation residual strength
