摘要
Anisotropic Pr-Fe-B films with soft-magnetic layer （Fe） and/or antiferromagnetic layer （Mn, FeMn or MnO） were prepared by direct-current （DC） magnetron sputtering on Si （100） substrates heated at 650℃. The influence of four types＇ different structures on the magnetic properties of Pr-Fe-B films was investigated. The phase and magnetic properties were characterized by means of X-ray diffraction （XRD） and superconducting quantum interference device （SQUID）. Addition of anti-ferromagnetic layer enhances both the coercivity and the remanence ratios of Pr-Fe-B films with suitable structures. The interface number increases and the antiferromagnetic-ferromagnetic exchange interaction is likely to become stronger, which affect the improvement of magnetic properties. To further understand the influence of structures with soft-magnetic Fe layer and/or antifer- romagnetic FeMn layer on the magnetic properties of Pr-Fe-B hard-magnetic films, the thickness of Pr-Fe-B layer was designed to decrease from 600 to 50 nm. The improvement of magnetic properties becomes obvious in Mo（50 nm）/Pr-Fe-B（25 nm）Mo（2 nm）FeMn（20 nm）Mo （2 nm）Pr-Fe-B（25 nm）/Mo（50 rim） film.
Anisotropic Pr-Fe-B films with soft-magnetic layer （Fe） and/or antiferromagnetic layer （Mn, FeMn or MnO） were prepared by direct-current （DC） magnetron sputtering on Si （100） substrates heated at 650℃. The influence of four types＇ different structures on the magnetic properties of Pr-Fe-B films was investigated. The phase and magnetic properties were characterized by means of X-ray diffraction （XRD） and superconducting quantum interference device （SQUID）. Addition of anti-ferromagnetic layer enhances both the coercivity and the remanence ratios of Pr-Fe-B films with suitable structures. The interface number increases and the antiferromagnetic-ferromagnetic exchange interaction is likely to become stronger, which affect the improvement of magnetic properties. To further understand the influence of structures with soft-magnetic Fe layer and/or antifer- romagnetic FeMn layer on the magnetic properties of Pr-Fe-B hard-magnetic films, the thickness of Pr-Fe-B layer was designed to decrease from 600 to 50 nm. The improvement of magnetic properties becomes obvious in Mo（50 nm）/Pr-Fe-B（25 nm）Mo（2 nm）FeMn（20 nm）Mo （2 nm）Pr-Fe-B（25 nm）/Mo（50 rim） film.
基金
financially supported by the National Key Basic Research Program of China (No. 2010CB934603)
the National Nature Science Foundation of China (Nos. 50931006 and 50971123)
