期刊文献+

计算机陶瓷元件的介电性能研究

Study on dielectric properties of ceramic components of computer
在线阅读 下载PDF
导出
摘要 采用传统的固相法合成了(1-x)MgTiO_3^-xCaTiO_3复合陶瓷,通过改变CaTiO_3的加入量和烧结温度的方法,采用X射线衍射光谱法(XRD)、扫描电子显微镜法(SEM)、能量散射光谱(EDS)等多种分析测试手段,研究了陶瓷的相组成和微观结构等对材料介电性能的影响,并探索介电性能的演变规律。结果表明,0.97MgTiO_3-0.03CaTiO_3复合陶瓷在1 300℃下具有较好的微波介电性能:介电常数ε_r=18.21,品质因数Q×f=76 640 GHz,谐振频率温度系数τ_f=-34.79×10^(-6)/℃。 (1 -x)MgTiO3-xCaTiO3 composite ceramics were synthesized by traditional solid-phase method and through the change of adding content of CaTiO3 and sintering temperature. With XRD, SEM, EDS and other analytical methods, the effect of the ceramic phase composition and microstructure on the dielectric properties was studied, and the evolution of the dielectric properties was explored. The results show that 0.97MgTiO3-0.03CaTiO3 composite ceramic has good dielectric properties at 1 300 ℃ : dielectric constant ~=18.21, quality factor Q×f=76 640 GHz, temperature coefficient of resonant frequency τf=-34.79×10^-6/℃.
出处 《电源技术》 CAS CSCD 北大核心 2016年第7期1487-1490,共4页 Chinese Journal of Power Sources
基金 河南省重点科技攻关项目(142102310255)
关键词 计算机 介电常数 物相 微观组织 computer dielectric constant phase microstructure
  • 相关文献

参考文献9

  • 1何茗.H_3BO_3掺杂的Ba_5Nb_4O_(15)陶瓷的烧结及介电性能[J].电子元件与材料,2013,32(8):42-44. 被引量:3
  • 2韩亚楠,翟学良,吴江,申玉双.掺锶对钛酸铅薄膜结晶性能的影响[J].无机盐工业,2009,41(8):24-26. 被引量:3
  • 3LEE J K,HONG.K S,JANG J W. Roles of Ba/Ti ratios in the di- electric properties of BaTiO3 ceramics[J].J Am Ceram Soc,2001, 84(9): 2001-2006.
  • 4LI L T, ZHAO J Q, GUI Z L. Modulation effect of Mn2+on dielec- tric properties of BaTiO3-based X7R[J]. Materials Letters, 2000,44 (1): 1-5.
  • 5WU Y J,LI J,TANAKA H,et al. Preparation of nano-structuredBaTiO3 thin film by electrophoretic deposition and its characteriza- tion[J]. Journal of the European Ceramic Society, 2005,25:2041- 2044.
  • 6莫兴婵,韦小圆,韦成峰,郑少英,覃远东,刘来君.Cu掺杂CaCu_3Ti_4O_(12)陶瓷的介电性能和晶界特征[J].电子元件与材料,2013,32(3):33-36. 被引量:3
  • 7LEE J K,HONG.K S,JANG J W. Roles of Ba/Ti ratios in the di- electric properties of BaTiO3 ceramics [J].J Am Ceram Soc, 2001, 84(9): 2001-2006.
  • 8LUAN W L, GAO L, KAWAOKA H. Fabrication and characteris- tics of free-grained BaTiO3 ceramics by spark plasma sintering[J]. Ceramics International, 2004,30(3 ): 405-408.
  • 9WU Y J, LI J, TANAKA H, et al. Preparation of nano-structured BaTiO3 thin film by electrophoretic deposition and its characteriza- tion [J]. Journal of the European Ceramic Society, 2005,25: 2041-2044.

二级参考文献35

  • 1Wang C M,Huang Y T,Chen Y C,et al.Characterization of cal-cium-modified lead titanate thin films derived from a diol-based sol-gel processs[J].Jpn.J.Appl.Phys.,1998,39(6A):3579-3583.
  • 2Calzda M L,Mmrtin M J,Ramos P,et al.Effect of composition and annealing conditions on the properties of sol-gel prepared calcium-modified lead titanate thin films[J].J.Phys.Chem.Solids,1997,58(7):1033-1039.
  • 3Chewastn S,Milne S J.Sol-gel synthesis and electrical characteri-zation of (Pb,Ca)TiO3 thin fims[J].J.Mater.Sci.,1997,32(3):575-582.
  • 4Ntu K,Mayer J W,Feldman L C.Electric thin film sciences:for electrical engineers & material scientists[M].London:Prentice Hall PTR,1992.
  • 5刘鹏,贺颖,李俊,朱刚强,边小兵.添加Nb对CaCu_3Ti_4O_(12)陶瓷介电性能的影响[J].物理学报,2007,56(9):5489-5493. 被引量:14
  • 6KAMBA S, PETZELT J, BUIXADERAS E, et al. High frequency dielectric properties of AsB4OI microwave ceramics [J]. J Appl Phys, 2001, 89(7): 3900-3906.
  • 7JAWAHAR I N, MOHANAN P, SEBASTIAN M T. AsB4OIs(A=Ba, Sr, Mg, Ca, Zn; B=Nb, Ta) microwave dielectric ceramics [J]. Mater Lett, 2003, 57: 4043-4048.
  • 8JAWAHAR I N, SEBASTIAN M T, MOHANAN P. Microwave dielectric properties of Ba(s.SrxTa4OIs, BasNhTa(4.)Ol and SrsNbxTa{,x)O ceramics [J]. Mater Sci Eng, 2004, B 106:207-212.
  • 9HUANG Q W, WANG P L, CHENG Y B, et al. XRD analysis of formation of strontium barium niobate phase [J]. Mater Lett, 2002, 56(6): 915-920.
  • 10ROTH R S, WARING J L. Phase equilibrium relations in the binary system barium oxide-niobium pentoxide [J]. J Res Natl Bur Stand, 1961, 65(3): 37-44.

共引文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部