期刊文献+

锆、铝脱氧对钢中硫化物生成行为的影响 被引量:8

Effects of Zr,Al deoxidation on formation behavior of sulfides in steel
原文传递
导出
摘要 通过真空感应炉试验研究了锆、铝脱氧对含硫易切削非调质钢中硫化物生成行为的影响,研究结果表明,在铝脱氧钢中硫化物大多呈沿晶群聚状分布(大多呈扇形或链状分布),是典型的Ⅱ类硫化物,单位面积硫化物的数量较多,尺寸较小,小于2.5μm的数量较多,大颗粒夹杂数量较少;在锆脱氧钢中硫化物主要也是沿晶的Ⅱ类硫化物,同时也有一些晶内分布的Ⅲ类硫化物,其分布与铝脱氧钢相比有较大改善,单位面积硫化物的数量减少,尺寸增大,大于5μm的数量增多;根据非均质形核理论,(001)Mn S//(001)Zr O_2的点阵错配度为3.0,而(111)Mn S//(0001)Al_2O_3的点阵错配度为26.9,凝固过程中Zr O_2作为硫化物形核核心的效率明显要高于Al_2O_3,向钢中加入锆,非均质形核的Mn S数量增多,使得一部分Mn S在较高的温度下分离析出,硫化物的总数减少、尺寸增大、分布从扇形向链形转变,改善了硫化物分布。 The effect of Zr and Al acting as deoxidizer on the formation behavior of sulfides in micro-alloyed steel was studied by vacuum induction furnace experiment. The experimental results showed that sulfides appear mostly intergranular cluster- like distribution which were typically the type Ⅱ sulfides(most showed fan or chain- like distribution) in Al deoxidized steel. Lots of sulfide particles in Al deoxidized steel existed per unit,and most of them were smaller than 2.5 μm,a few were bigger. The sulfides in Zr deoxidized steel mainly appeared intergranular distribution which belonged to the typeⅡsulfides;Some precipitated in interdendritic regions,which fitted into the type III sulfides. Compared to the sulfides in Al deoxidized steel,the distribution of sulfides in Zr deoxidized steel had been much improved,mostly of them were chainlike distributed. And the number of sulfides per unit area was reduced,the size increased,and the number of sulfides whose size was bigger than 5 μm increased;According to the nonhomogeneous nucleation theory,the lattice disregistry between(001)Mn S and(001)Zr O2 was 3.0,and the lattice disregistry between(111)Mn S and(0001)Al2O3was 26.9. Due to the low lattice disregistry between the Mn S and Zr O2,a part of Mn S precipitated on Zr O2 nuclei in advance,and grown into big inclusions(as type Ⅲ),which made the precipitation amount of type Ⅱ Mn S at the end of solidification reduces,the distribution of sulfides changed from fan-like to chainlike distribution,and the distribution of sulfides improved.
出处 《钢铁》 CAS CSCD 北大核心 2016年第2期38-43,61,共7页 Iron and Steel
基金 国家自然科学基金资助项目(51304002) 国家自然科学基金委员会-宝钢集团有限公司钢铁联合研究基金资助项目(U1560109) 安徽省教育厅重点资助项目(KJ2013A057)
关键词 硫化物 生成行为 错配度 非均匀形核 sulfides formation behavior lattice disregistry nonhomogeneous nucleation
  • 相关文献

参考文献14

  • 1Sims C E, Dahle F B. The Effect of aluminum on the properties of medium carbon cast steel[J]. Trans AFS, 1938,46: 65.
  • 2Sims C E. Quality control of electric furnace melting[J]. Proc Elec Furnace Steel, AIME, 1959, 17: 104.
  • 3Oikawa K, Ohtanio H, Ishida K, et al. The control of the mor- phology of MnS inclusions in steel during solidification[J]. ISIJ International, 1995,35(4): 402.
  • 4Oikawa K, Ishida K , Nishizawa T. Effect of titanium addition on the formation and distribution of MnS inclusions in steel dur- ing solidification[J]. ISIJ International, 1997,37(4): 332.
  • 5Carl B, Gilles L E, Hoang L H, et al. Development of an inte- grated method for fully characterizing multiphase inclusions and its application to calcium-treated steels[J]. Materials Character- ization, 1997,38(1): 25.
  • 6Larsson A, Ruppi R. Structure and composition of build-up lay- ers on coated tools during turning of Ca-treated steel[J]. Materi- als Science and Engineering:A, 2001,313: 160.
  • 7Leon L, John R B, Alex M, et al. Sulfide shape control in high strength low alloy steels[J]. Etallurgical Transactions, 1970, 1 (12)1334l.
  • 8肖国华,董瀚,王毛球,惠卫军.钙处理对齿轮钢中硫化物形貌的影响[J].钢铁研究学报,2010,22(7):33-37. 被引量:2
  • 9Takamura J I, Mizoguhci S. Roles of oxide in steels[C]//Metal- lurgy of Oxides in Steels, Proceedings of the Six International Iron and Steel Congress. Nagoya: ISIJ, 1990: 591.
  • 10Ogibayashi S. Advances in technology of oxides metallurgy[J]. Nippon Steel Technical Report, 1994, 61(4): 70.

二级参考文献20

  • 1LIU Zhilin1, LIN Cheng1 & GUO Yanchang2 1. Department of Materials and Chemical Engineering, Liaoning Institute of Technology, Jinzhou 121001, China,2. The Technical Center of Benxi Iron and Steel Group Corporation, Benxi 117000, China.Theoretical calculation of the impact work in the alloying non-quenched and tempered steel[J].Science China(Technological Sciences),2006,49(3):257-273. 被引量:11
  • 2李勇,邵刚勤,段兴龙,王天国.固体氧化物燃料电池电解质材料的研究进展[J].硅酸盐通报,2006,25(1):42-45. 被引量:14
  • 3路新瀛,梁开明,顾守仁,方鸿生,郑燕康,刘鹏.氧空位对氧化锆相结构稳定性及相变过程的影响[J].硅酸盐学报,1996,24(6):670-674. 被引量:20
  • 4Davis J R. Gear Materials, Properties and Manufacture [M]. Materials Park, Ohio: ASM International,2005.
  • 5Apple C A. The Relationship Between Inclusions and the Ma chinability of Steel [c]//31st Mechanical Working and Steel Processing Proceedings. Chicago: Iron and Steel Society USA 1989:415.
  • 6狩野隆,羽生田智纪.Ca処理をした硫化物系快削鋼における介在物の被削性改善機能向上[J].電気製鋼,2004,75(1):27.
  • 7家口浩,土田武広,新堂陽介ほか.介在物形態制御夕イブ鉛フリ一快削鋼[J].神户製鋼技報,2002,52(3):62.
  • 8松井直樹,渡里宏二.Ca添加機械構造用鋼の切削にぉける超硬工具摩耗抑制効果[J].鉄と鋼,2005,91(8):639.
  • 9狩野隆 次井塵介 中村貞行.Ca+S系介在物形態制御型快削鋼.電気製鋼,2000,71(1):89-89.
  • 10Wouter Tiekink, Begona Sandllana, Rob Boom. Calcium: Toy, Tool or Trouble[J]. AIST Transactions ,2008,5(4): 185.

共引文献5

同被引文献88

引证文献8

二级引证文献133

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部