期刊文献+

碳钢在管流体系中的流动腐蚀动力学模型 被引量:9

FLOW-INDUCED CORROSION KINETICS MODEL OF CARBON STEEL IN FLOW LOOP SYSTEM
在线阅读 下载PDF
导出
摘要 针对管流体系 ,根据动量、能量和质量守恒原理 ,应用壁函数、k -ε湍流运动模型确立了管流体系中的计算流体力学模型和质量传递模型 ;结合必要的实验分析碳钢流动腐蚀过程中的主要控制因素及其影响程度 ,建立了碳钢在流动的 3.5 %NaCl溶液中的流动腐蚀动力学模型 .同时 ,采用数值计算方法计算了流动腐蚀速度 ,并与实验结果进行了验证 . Wall function, k-ε turbulence model are used in the present study.The numerical hydrodynamics models and mass transfer models in flow loop system are defined in accordance with the basic theory of hydrodynamics and conservation of mass,momentum or energy.Flow-induced corrosion kinetics model of carbon steel in flowing 3.5% NaCl solution is set up on the basis of determining main controlling factors and analyzing their degree of influence in flow-induced corrosion by some electrochemical experiments. The numerical method used in this study is based on the control volume approach for discretization of partial differential equations that express the characteristics of fluid flow and mass transfer.The power law scheme is also used in discretization of convection-diffusion equations.In this manner,the resulting discretization equations express the conservation principle for mass,momentum and energy over the finite control volume,just as the differential equations express the same principle for the infinitesimal volume.In this way,the formulation is straightforward.The user program is compiled.In accordance with flow-induced corrosion kinetics models,flow-induced corrosion rates are numerically calculated with SIMPLE algorithm.The flow-induced corrosion rates calculated by numerical method are compared with the ones measured by weight loss.The numerically computed flow-induced corrosion rates are mostly equal to the ones measured by weight loss experiments.If proves that the flow-induced corrosion kinetics models are correct and accurate,and that the user program is reasonable.The models are founded on the basis of some electrochemical experiments and reasonable hypothesis.Corrosion electrochemical factor plays a dominant role in flow-induced corrosion of carbon steel in flowing 3.5% NaCl solution.
出处 《化工学报》 EI CAS CSCD 北大核心 2002年第7期680-684,共5页 CIESC Journal
基金 国家自然科学基金资助项目 (No .5 0 10 10 0 2 )~~
关键词 碳钢 流动氯化物 管流体系 壁函数 κ-ε湍流模型 流动腐蚀 动力学模型 电化学 流体动力学 质量传递模型 carbon steel,flowing 3.5% NaCl solution,flow loop system,wall function, k-ε turbulence model,flow-induced corrosion kinetics model,electrochemical factor
  • 相关文献

参考文献5

二级参考文献28

  • 1张天成,姜晓霞,李诗卓,师昌绪.不锈钢在H_3PO_4+NaCl溶液中腐蚀磨损的交互作用[J].金属学报,1993,29(5). 被引量:11
  • 2林玉珍,雍兴跃,徐瑞芬.动态腐蚀模拟实验装置的研制[J].全面腐蚀控制,1995,9(2):7-10. 被引量:7
  • 3陶文铨.数值传热学[M].西安:西安交通大学出版社,1995..
  • 4曹楚南.腐蚀电化学[M].北京:化学工业出版社,1994.133-133.
  • 5姜世振 吴玖.双相不锈钢论文集[M].冶金部钢铁研究总院,1992.241.
  • 6林玉珍 雍兴跃 等.-[J].全面腐蚀控制,1995,9(2):7-7.
  • 7魏宝明.金属腐蚀理论及其应用[M].北京:化学工业出版社,1995.126.
  • 8林玉珍 等.“94秋季中国材料研讨会[M].化学工业出版社,1995,3(2).271.
  • 9林玉珍 雍兴跃 等.第一届磨损腐蚀学术会论文集[M].,1996.60.
  • 10林玉珍 王贤铭.-[J].腐蚀科学与防护技术,1992,4(2):3-3.

共引文献107

同被引文献81

引证文献9

二级引证文献35

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部