摘要
通过国产六面顶设备高压高温腔体组装结构研究，提出了大腔体烧结ＰＤＣ材料存在的问题及有关对策．不同腔体组装结构对比实验结果表明，改进后的Ⅲ号腔体组装结构烧结ＰＤＣ材料的平均磨耗比 Ｑ为 １２．３×１０４，其中心点相对边缘点耐磨性降幅仅为 １９．２％，可实现φ２５ｍｍ ＰＤＣ材料的均匀烧结。
By the study of the assembly structure of HP/HT cell of the Cubic Press, some sintering technical problems and the solutions in the use of the enlarged HP/HT cell were proposed. The test results of the samples sintered at different HP/HT cells show that the 25mm-diameter PDC sintered with the improved large HP/HT cell No3 possesses wear-resistance (Q) over bar 12.3x10(4) with only 19.2% decrease from the peripheral point to the central point, therefore the even sintering of 25mm-diameter PDC material can be realized.
出处
《无机材料学报》
SCIE
EI
CAS
CSCD
北大核心
2001年第4期757-762,共6页
Journal of Inorganic Materials
基金
原冶金工业部九五重点攻关项目(课题号9435A)
湖南省自然科学基金(OOJJY2044)
