期刊文献+

一种双斜切双压缩面进气道性能的数值模拟 被引量:6

Numerical simulation of a dual-swept/dual-ramp inlet
在线阅读 下载PDF
导出
摘要 采用LU SGS隐式推进方法及ROE的通量差分分裂格式 ,结合带非线性限量因子的MUSCL插值方法编写了雷诺平均的三维N S方程的数值求解程序 ,并借助该流场计算程序研究了一种双斜切双压缩面进气道在未经流场控制情况下的流动结构和气动性能(M =1.9,H =11Km)。计算结果表明 :所编制的流场计算程序能够准确快速地求解三维粘性流场 ,并对流场间断具有较高的分辨率 ;所研究的进气道即使在未经流场控制的情况下也具有较高的总压恢复系数 ,这体现了双斜切双压缩面进气道总压恢复系数高的优点 ,但由于流场中存在分离流动 ,应采取抽吸附面层等流场控制措施。 Combined with the LU SGS implicit scheme and MUSCL interpolation method, Roe's approximate Riemann scheme is applied to develop a code for 3 Dimensional compressible Navier Stokes equations. With this code the flow field structure and aerodynamic performance of a dual swept/dual ramp inlet without flow field control is investigated at M =1.9, H =11Km. The calculated results show that: (a) the code developed in this paper is reliable to solve 3 Dimensional compressible flow field, it also possesses the quality of high resolution and sharp converge curve; (b) even without any effort of flow field control, the inlet under investigation does embody the advantage of high total pressure recovery of common dual swept/dual ramp inlet, but further effort has to be exerted to refrain the local separation for higher performance.
出处 《空气动力学学报》 CSCD 北大核心 2001年第3期338-343,共6页 Acta Aerodynamica Sinica
关键词 双斜切双压缩面进气道 分离流动 总压恢复系数 数值方法 战斗机 流动控制 流场计算程序 dual swept/dual ramp inlet separated flow total pressure recovery distortion numerical method
  • 相关文献

参考文献6

  • 1郭荣伟 梁德旺 等.隐身式进气道机理与应用研究(四、五).南京航空航天大学课题研究报告[M].,1994..
  • 2刘西鹏.双斜切S弯进气道地面工作状态涡流控制实验研究.南京航空航天大学硕士学位论文[M].,1996..
  • 3何志强,郭荣伟.双斜切双压缩面进气道进口波系结构的数值研究[J].航空学报,1999,20(4):339-342. 被引量:5
  • 4刘西鹏,硕士学位论文,1996年
  • 5郭荣伟,南京航空航天大学课题研究报告,1994年
  • 6Yoon S,AIAA 89-1964 cp,1989年

二级参考文献4

  • 1郭荣伟 梁德旺 等.隐身式进气道机理与应用研究(四、五)[M].南京:南京航空学院,1994..
  • 2刘西鹏.双斜切S弯进气道地面工作状态涡流控制实验研究[M].南京:南京航空航天大学,1996..
  • 3刘西鹏,学位论文,1996年
  • 4郭荣伟,隐身式进气道机理与应用研究,1994年

共引文献4

同被引文献36

  • 1钟易成,余少志,陈晓.涡破碎片控制尖脊进气道总压畸变的试验研究[J].推进技术,2005,26(1):34-37. 被引量:1
  • 2施岳定,李素循.底部边界排气的减阻效应[J].空气动力学学报,1994,12(3):326-331. 被引量:2
  • 3王明鉴.整体式固体火箭冲压发动机的应用性能探讨[J].固体火箭技术,1995,18(1):10-16. 被引量:7
  • 4钟易成,余少志,陈晓.带尖脊进气口的大S弯扩压器流动特性研究[J].航空动力学报,1996,11(4):385-388. 被引量:6
  • 5刘西鹏.双斜切S弯进气道地面工作状态涡流控制实验研究[M].南京:南京航空航天大学,1996..
  • 6Hall G R, Hurwitz W M, Tiebens G S, et al. Development of the F/A- 18 E/F air induction system[R]. AIAA 93-2152, 1993.
  • 7Philhower J S,Robinson D E,Brown R J.Development of a highly offset induction system for a supersonic STOVL fighter[R].AIAA98—3417.1998.
  • 8Jameson A, Schmidt W, Turkel E. Numerical solution of the Euler equations by finite volume methods using Runge-Kutta time-stepping schemes[R]. AIAA 81-1259, 1981.
  • 9Barth T J, Jespersen D. The design and application of upwind schemes on unstructured meshes[R]. AIAA 89-0366, 1989.
  • 10Jones W P, Launder B E. The prediction of laminarization with a two equation model of turbulence[J] . International Journal of Heat and Mass Transfer, 1972, 15:301 - 314.

引证文献6

二级引证文献23

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部