期刊文献+

基于离散单元法球形颗粒碰撞破碎行为的数值模拟 被引量:10

Numerical Simulation on Breaking Behavior of Spheroidal Particles Impact Based on Discrete Element Method
在线阅读 下载PDF
导出
摘要 采用离散单元法,基于Hertz-Mindlin粘结接触模型,对2个球形颗粒在水平方向上的对心碰撞破碎过程进行数值模拟研究,分析相对速度及粒径比k为1.2、1.4、1.6对颗粒破碎行为的影响。结果表明:撞击速度较小时,颗粒碰撞后未破碎,但是内部出现局部粘结键的断裂,宏观表现为裂纹;随着撞击速度的增大,颗粒出现破裂或完全破碎;不同粒径比的2个颗粒碰撞时,小颗粒比大颗粒破碎严重,粒径比为1.6时,粒径较小的颗粒碰撞后获得的动量最大,粒径比为1.4时次之,粒径比为1.2时最小。 Using the discrete element method, the breaking process of central collision in horizontal direction between two spherical particles was simulated based on Hertz-Mindlin contact model. The effect of relative velocity and different diameter ratios of 1.2, 1.4 and 1.6 on particles breaking behavior were studied. The results show that at low impact velocity, the entire particles are not broken, but their interior bondings begin to fracture, which cause crack at the macro level With the impact velocity increasing, the particles begin to fracture or be broken completely. When two particles with distinct diameter ratios impact each other, the smaller particle is broken more seriously than the larger one. When the diameter ratio is 1.6, the smaller one acquires the greatest momentum, the momentum with the diameter ratio of 1.4 takes the second place, and the momentum with the diameter ratio of 1.2 is the least.
出处 《中国粉体技术》 CAS 北大核心 2014年第3期60-63,共4页 China Powder Science and Technology
关键词 颗粒碰撞 破碎 离散单元法 数值模拟 particle impact breakage discrete element method numericalsimulation
  • 相关文献

参考文献9

  • 1CHEONG Y, SALMAN A, HOUNSLOW M. Effect of impact angle and velocity on the fragment size distribution of glass spheres[J]. Powder Technology, 2003, 138 (2): 189-200.
  • 2康杰,杨云川.滑石冲击破碎三维数值模拟[J].中国粉体技术,2010,16(2):68-71. 被引量:2
  • 3BAGHERZADEH K, MIRGHASEMI A, MOHAMMADI S. Numerical simulation of particle breakage of angular particles using combined DEM and FEM[J]. Powder Technology, 2011,205 (1/2/3): 15-29.
  • 4YILDIRIM B, MUFTU S, GOULDSTONE A. Modeling of high velocity impact of spherical particles[J]. Wear, 2011,270 (9/10): 703- 713.
  • 5SALMAN A, GORHAM D. The fracture of glass spheres[J]. Powder Technology, 2000, 107 (1): 179-185.
  • 6CHAUDHRI M. Impact breakage of semi-brittle spheres[J]. Powder Technology, 2004, 143/144: 31-40.
  • 7牟赛杰,周香林,巫湘坤,王建国,张济山.非晶合金颗粒高速撞击过程及破碎行为的模拟[J].材料热处理学报,2011,32(2):146-150. 被引量:2
  • 8徐佩华,黄润秋,邓辉.颗粒离散元法的颗粒碎裂研究进展[J].工程地质学报,2012,20(3):410-418. 被引量:21
  • 9POTYONDY D, CUNDALL P. A bonded-particle model for rock[J]. International Journal of Rock Mechanics and Mining Sciences, 2004, 41 (8): 1329-250.

二级参考文献20

  • 1周香林,张济山,樊建中,樊自栓,孙冬柏.球磨纳米NiCr/WC复合粉的微观组织[J].材料热处理学报,2006,27(6):21-24. 被引量:3
  • 2郑水林.非金属矿加工与应用[M].北京:化学工业出版社,2004:80.
  • 3Wang W H, Dong C, Shek C H. Bulk metallic glasses[ J]. Materials Science and Engineering R, 2004, 44(2 -3) : 45 -89.
  • 4Sanghoon Yoon, Hyung Jun Kim, Changhee Lee. Deposition behavior of bulk amorphous NiTiZrSiSn according to the kinetic and thermal energy levels in the kinetic spraying process[ J ]. Surface and Coatings Technology, 2006,200: 6022 -6029.
  • 5Yoo Y H, Lee S H, Kim J G. Effect of heat treatment on the corrosion resistance of Ni-based and Cu-based amorphous alloy coatings [ J ]. Alloys and Compounds, 2008, 461 : 304 - 311.
  • 6杨云川,李国康.气流磨粉碎机理分析.中国粉体技术,2002,.
  • 7Cronin D S, Khahn B, Christian K, et al. Implementation and validation of the Johnson-holmquist ceramic material model in LS-Dyna [ A ]. Proceedings of the 4th European LS-Dyna Users Conference[ C ]//Ulm, Germany, 2003 : D-I 47 -60.
  • 8B~rvik T, Hopperstad O S, Berstad T, et al. A computational model of viscoplasticity and ductile damage for impact and penetration [ J ]. European Journal of Mechanics-A/Solids, 2001, 20:685 - 712.
  • 9Hamid Assadi, Frank Gartner, Thorsten Stohenhoff, et al. Bonding mechanism in cold gas spraying[ J]. Acta Materialia, 2003,51: 4379 -4394.
  • 10余同希,卢国兴.材料与结构的能量吸收[M].北京:化学工业出版社,2005.

共引文献21

同被引文献103

引证文献10

二级引证文献48

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部