期刊文献+

锂离子电池LiMn2O4/石墨电极放电过程中扩散极化的仿真 被引量:12

Simulation of diffusion polarization in LiMn_2O_4/graphite Li-ion battery during discharge process
在线阅读 下载PDF
导出
摘要 针对扩散极化及其影响因素,以LiMn2O4/石墨锂离子电池为研究对象,基于一维电化学模型开展了其放电过程中扩散极化的数值仿真研究。结果表明:在放电过程中,正负电极均存在固、液相扩散极化,且随着放电过程的深入,固、液相扩散极化均在增大。电极活性物质颗粒粒径对固相扩散过程影响显著,减小活性物质颗粒粒径能有效地降低固相扩散极化。当正、负极活性物质颗粒粒径分别由10和12μm减小到5和6μm,在1C放电1 800 s时,颗粒表面和中心的锂离子浓度差分别降低至原来的25.35%和25.07%;当正、负极活性物质颗粒分别由10和12μm增加至20和24μm时,颗粒表面和中心的锂离子浓度差分别增加至原来的391.66%和266.96%。电极厚度是影响液相扩散极化的一个主要因素,厚度的减小能够缩短液相扩散的路径,从而减小电极的液相扩散极化。当正、负极电极厚度分别由90和60μm增加至112.5和75μm,在1C放电1 800 s时,厚度方向的最大锂离子浓度差与平均浓度的比值相应地由14.05%和1.71%增加至19.54%和2.61%;当正、负极厚度分别由90和60μm减小至67.5和45μm时,厚度方向的最大锂离子浓度差与平均浓度的比值分别由14.05%和1.71%减小至8.72%和0.98%。 Taking a LiMn2O4/graphite battery as the research object, the diffusion polarization and its influencing factors of the battery were studied by numerical simulation method based on the one-dimensional electrochemical model. The results show that both liquid phase and solid phase diffusion polarizations exist in the positive and negative electrodes, and diffusion polarization increase with the conducting of the discharge process. The particle size of active materials has a distinct impact on the solid phase diffusion polarization, reducing the active material particle sizes can reduce the solid phase diffusion polarization effectively. As the particle radius of active materials in positive and negative electrodes decrease from 10 and 12μm to 5 and 6μm, respectively, the lithium ion concentration differences at surface and center will drop by 25.35%and 25.07%, respectively, when it discharges at 1C for 1 800 s. When the particle radius of active materials in positive and negative electrodes increase from 10 and 12μm to 20 and 24μm, respectively, the lithium ion concentration differences at surface and center in positive and negative electrode rise by 391.66% and 266.96%,respectively. The electrode thickness is a major influence factor of the liquid phase diffusion polarization, decreasing it can decrease the liquid diffusion path and the liquid phase diffusion polarization. As the thicknesses of positive and negative electrode increase from 90 and 60 μm to 112.5 and 75 μm, respectively, the ratios of the largest lithium ion concentration difference and the average lithium ion concentration along the positive and negative thickness direction increase from 14.05%and 1.71%to 19.54%and 2.61%, respectively. And when the thicknesses of positive and negative electrode decrease from 90 and 60 μm to 67.5 and 45 μm, respectively, the ratios between the largest lithium ion concentration difference and the average lithium ion concentration along the positive and negative thickness direction decrease from 14.05%and 1.71%to 8.72%and 0.98%, respectively.
出处 《中国有色金属学报》 EI CAS CSCD 北大核心 2013年第8期2235-2242,共8页 The Chinese Journal of Nonferrous Metals
基金 国家自然科学基金资助项目(51204211) 中国博士后科学基金资助项目(2012M521543) 高等学校博士学科点专项科研基金资助(20120162120089)
关键词 数值仿真 电化学模型 固相扩散 液相扩散 锂离子电池 numerical simulation method electrochemical model solid phase diffusion liquid phase diffusion Li-ionbattery
  • 相关文献

参考文献21

  • 1汤小辉,李国希,高桂红,胡金丰,梁国标.锂离子电池正极材料LiCoO_2-LiFePO_4的性能[J].中国有色金属学报,2012,22(1):139-143. 被引量:7
  • 2SCOSATI B, GARCHE J. Lithium batteries: Status, prospectsand future[J]. Journal of Power Sources, 2010, 195: 2419-2430.
  • 3王大为,李东江,李军,杨勇.锂离子电池电化学反应模型研究进展浅析[J].电化学,2011,17(4):355-362. 被引量:8
  • 4NYMAN A, ZAVALIS T G, ELGER R, BEHM M, LINDBERGH G. Analysis of the polarization in a Li-ion battery cell by numerical simulations[J]. Journal of the Electrochemical Society, 2010, 157(11): 1236-1246.
  • 5DOYLE M, FULLER T F, NEWMAN J. Modeling of galvanostatic charge and discharge of the lithium/polymer/ insertion cell[J]. Journal of the Electrochemical Society, 1993, 140(6): 1526-1533.
  • 6DOYLE M, NEWMAN J,GOZDZ A S, SCHMUTZ C N, TARASCON J M. Comparison of modeling predictions with experimental from plastic lithium ion cells[J]. Journal of the Electrochemical Society, 1996, 143(6): 1890-1903.
  • 7DOYLE M, NEWMAN J. The use of mathematical modeling in the design of lithium/polymer battery systems[J]. Electrochima Acta, 1995, 40(13): 2191-2196.
  • 8ALBERTUS P,CHRISTENSEN J,NEWMAN J. Experiments on and modeling of positive electrodes with multiple active materials for lithium-ion batteries[J]. Journal of the Electrochemical Society, 2009, 156(7): A606-A608.
  • 9STEWART S, ALBERTUS P, SRINIVASAN V, PLITZ I, PEREIRA N, AMATUCCI G, NEWMAN J. Optimizing the performance of lithium titanate spinel paired with activated carbon or iron phosphate[J]. Journal of the Electrochemical Society, 2008, 155(3): 253-261.
  • 10KUMARESAN K, SIKHA G, WHITE R E. Thermal model for a li-ion cell[J]. Journal of the Electrochemical Society, 2008, 155(2): 164-171.

二级参考文献52

  • 1刘云建,胡启阳,李新海,王志兴,郭华军,彭文杰.钴酸锂的再生及其电化学性能[J].中国有色金属学报,2007,17(6):984-989. 被引量:10
  • 2黄可龙.锂离子电池原理与关键技术[M].北京:化学工业出版社,2009.
  • 3Doyle M, Fuller T F, Newman J. Modeling of galvanosta- tie charge and discharge of the lithium/polymer/ inser- tion cell [ J ]. Journal of the Electrochemical Society, 1993,140(6) :1526-1533.
  • 4Basu S, Worrell W L. Fast ion transport in solids [ C ]. Amsterdam: North-Holland Publishing Co., 1979: 149- 152.
  • 5Sequeira C A C, Hopper A. The study of lithium elec- trode reversibility against (PEO) xLiF3CSO3 polymeric electrolytes [ J ]. Solid State Ionics, 1983,2 ( 9/10 ) : 1131-1138.
  • 6Fuller T F, Doyle M, Newman J. Simulation and optimi- zation of the dual lithium ion insertion cell [ J ]. Journal of the Electrochemical Society, 1994,141 ( 1 ) : 1-10.
  • 7Pollard R, Newman J. Transient behaviour of porous e- lectrodes with high exchange current densities [ J ]. Electrochimica. Acta, 1980,25 (3) :315-321.
  • 8Feng Y(冯毅).Study of mathematical model for lithi- urn-ion battery [ D ]. Shanghai: Graduate University of Chinese Academy of Sciences( 中国科学院研究生院博士论文),2008.
  • 9Albertus P, Christensen J, Newman J. Experimentals on and modeling of positive electrodes with multiple active materials for lithium-ion batteries [ J ]. Journal of the Electrochemical Society,2009,156(7) :A606-A618.
  • 10Ramadass P, Haran B, Gomadam P M, et al. Develop- ment of first principles capacity fade model for. Li-ion cells [J]. Journal of the Electrochemical Society,2004, 151 (2) :A196-A203.

共引文献18

同被引文献73

  • 1何向明,蒲薇华,蔡砚,姜长印,万春荣,夏定国.基于控制结晶法制备的锂离子电池正极材料球形锰酸锂[J].中国有色金属学报,2005,15(9):1390-1395. 被引量:22
  • 2赵铭姝,汪飞,宋晓平.锂离子电池正极材料锰钴酸锂的表征与分解动力学[J].中国有色金属学报,2005,15(9):1396-1402. 被引量:5
  • 3陈则韶,葛新石,顾毓沁.量热技术和热物性测量[M].合肥:中国科学技术大学出版社,1990.
  • 4RAMADASS P,HARAN B,WHITE,R,POPOV B N.Capacity fade of Sony 18650 cells cycled at elevated temperatures Part Ⅰ.Cycling performance[J].Journal of Power Sources,2002,112(2):606-613.
  • 5RAMADASS P,HARAN B,WHITE R,POPOV B N.Capacity fade of Sony 18650 cells cycled at elevated temperatures Part Ⅱ.Capacity fade analysis[J].Journal of Power Sources,2002,112(2):614-620.
  • 6KHATEE S A,FARID M M,SELMAN J R,AL-HALLAJ S.Design and simulation of a lithium-ion battery with a phase change material thermal management system for an electric scooter[J].Journal of Power Sources,2004,128(2):292-307.
  • 7GUO G,LONG B,CHENG B,ZHOU S,XU P,CAO B.Three-dimensional thermal finite element modeling of lithium-ion battery in thermal abuse application[J].Journal of Power Sources,2010,195(8):2393-2398.
  • 8SATO N,YAGI K.Thermal behavior analysis of nickel metal hydride batteries for electric vehicles[J].JSAE Review,2000,21(2):205-211.
  • 9KIZILEL R,SABBAH R,SELMAN J R,AL-HALLAJ S.An alternative cooling system to enhance the safety of Li-ion battery packs[J].Journal of Power Sources,2009,194(2):1105-1112.
  • 10LI Jie,CHEN Yun,JIA Ming,TANG Yi-wei,LIN Yue,ZHANG Zhi-an,LIU Ye-xiang.An electrochemical-thermal model based on dynamic responses for with Li iron phosphate battery[J].Journal of Power Sources,2014,255:130-143.

引证文献12

二级引证文献67

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部