期刊文献+

用于二乙醇胺脱氢的Cu/ZnO/Al_2O_3/ZrO_2催化剂的制备与表征 被引量:1

Preparation and Characterization of Cu/ZnO/Al_2O_3/ZrO_2 Catalyst Used in Diethanolamine Dehydrogenation
原文传递
导出
摘要 以氢氧化钠为沉淀剂,硝酸铜、硝酸锌、硝酸铝和硝酸氧锆为原料,采用共沉淀法制备出了用于二乙醇胺脱氢制亚氨基二乙酸的Cu/ZnO/Al2O3/ZrO2催化剂,并用物理吸附(BET)和X射线衍射(XRD)对不同种类的铜基催化剂进行了表征,探讨了ZnO和Al2O3的不同比例对催化剂性能的影响。结果表明,同时加入ZnO和Al2O3的Cu/ZnO/Al2O3/ZrO2催化剂具有大的比表面积,Cu/ZnO/Al2O3/ZrO2催化剂具有非晶态结构。该催化剂适宜的反应条件为:w(NaOH)=30%、反应温度160℃、压力1.0 MPa,二乙醇胺转化率可达100%,亚氨基二乙酸收率可达95.61%。 Cu/ZnO/Al2O3/ZrO2 catalyst used in diethanolamine dehydrogenation was synthesized via a coprecipitation process with copper nitrate, zinc nitrate, aluminum nitrate and zirconium oxynitrate as reactants, using sodium hydroxide as precipitation agent, and various kinds of copper-based catalyst were characterized by means of physical adsorption (BET) and X-ray diffraction ( XRD ), and the influence of different ratio of ZnO to Al2O3 in the catalyst was discussed. The results show that Cu/ ZnO/Al2O3/ZrO2 catalyst into which ZnO and Al2O3 were simultaneously added has a big specific surface area and an amorphous structure. The conversion of diethanolamine was up to 100%, and the yield of iminodiacetic acid was 95.61% under the suitable catalyst conditions of 30% sodium hydroxide,temperature 160 ℃,and pressure 1.0 MPa.
出处 《精细化工》 EI CAS CSCD 北大核心 2013年第9期1036-1040,1051,共6页 Fine Chemicals
基金 湖南省科技厅一般项目(2011GK3199)~~
关键词 二乙醇胺 亚氨基二乙酸 催化脱氢 Cu ZnO AL2O3 ZRO2催化剂 表征 diethanolamine iminodiacetic acid catalytic dehydrogenation Cu/ZnO/Al2O3/ZrO2 catalyst characterization
  • 相关文献

参考文献19

二级参考文献121

共引文献80

同被引文献28

引证文献1

二级引证文献10

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部