期刊文献+

一种二阶补偿带隙基准设计 被引量:1

Design of a second-order compensated bandgap reference
在线阅读 下载PDF
导出
摘要 基于分段补偿原理和MOS管的漏极电流是过驱动电压的平方关系函数,提出了一种新颖的二阶补偿结构,仅引入一股与温度成平方关系的电流,既补偿了低温阶段的基准电压,又补偿了高温阶段的基准电压,大大提高了基准电压源随温度变化的稳定性。采用0.5μm BCD工艺对电路进行仿真,结果表明,输出电压为1.24 V,温度范围在-35℃~135℃时,温度系数为2.82 ppm/℃;在低频时,电源抑制比达到了75.6 dB。 Based on sectional compensation principle and that the drain current of the MOS transistor is squared relationship function of the overdrive vohage, the design proposes a novel second-order compensation structure.Just introducing a current which is a square relation with temperature, both compensates the reference voltage for the low temperature stage and the high temperature stage, greatly improving the stability of the reference voltage source varying with temperature. By using 0.5 μm BCD process to simulate circuit ,the results show that the output voltage is 1.24 V, and when the temperature range from -35μ to 135 ℃,the temperature coefficient is 2.82 ppm/℃. And at low frequencies, power supply rejection ratio is 75.6 dB.
出处 《电子技术应用》 北大核心 2013年第7期41-43,46,共4页 Application of Electronic Technique
关键词 基准电压 二阶补偿 分段补偿 曲率校正 电源抑制比 bandgap reference second-order compensation sectional compensation curvature correction PSRR
  • 相关文献

参考文献5

  • 1MEIJER G C M,SCHMALE P C , ZALINGE K V.A newcurvature conrrected bandgap reference [J]. IEEE J. SolidState Circuit, 1982 , SC-17(11) : 1139-1143.
  • 2SONG B S , GRAY P R. A precision curvature - compensatedCMOS bandgap reference [ J]. IEEE J. Solid State Circuit,1983 , 18(6):634-643.
  • 3LEUNG C Y , LEUNG K N.Design of a 1.5 V high ordercurvature compensated COMS bandgap reference circuits andsystems [C]. ISCA' 04 , Proceeding of the 2004 InternationlSymposium , 2004.
  • 4LEE I Y , KIM G D , KIM W C. Exponential curvature com -pensated BiCMOS bandgap references[J].IEEE J.Solid StateCircuit, 1994,29(11): 1396-1403.
  • 5张春茗,邵志标.高精度分段曲率校正CMOS带隙基准的设计[J].电子学报,2007,35(11):2193-2197. 被引量:7

二级参考文献11

  • 1Robert H Walden.Analog-to-digital converter survey and analysis[J]. IEEE J Selected Areas in Communications, 1999, 17 (4) :539-550.
  • 2Arie Van Staveren, Chris J M Verhoeven, Althur H MVan Roermund. The design of low-noise bandgap reference [ J ]. Transactions on Circuits and Systems, 1996, 43( 4):290-300.
  • 3Gabriel A Rincon-Mora, Phillip E Allen. A 1. 1v current-mode and piecewise-linear couvature-Corrected bandgap reference [J]. IEEE J Solid State Circuit, 1998,33(10):1551-1554.
  • 4Yannis P Tsividis. Accurate analysis of temperature effects in Ic-VBE characteristics with application to bandgap reference Sources[ J ]. IEEE J, Solid State Circuit, 1980, SC- 15 (6) : 1076-1084.
  • 5K M Tham, K Nagaraj. A low supply voltage high PSRR voltage reference in CMOS process [ J], IEEE J Solid State Circuit, 1995,30(5) :586-590.
  • 6Germano Niconini, Daniel Senderowicz. A CMOS bandgap reference for differential signal processing [ J ]. IEEE J Solid State Circuit, 1991,26(1) :41-50.
  • 7E A Vittoz, O Neyroud. A low-voltage CMOS bandgap reference[J]. IEEE J Solid State Circuit, 1979, SC-14(8) : 573-577.
  • 8C R Palmer, R C Dobkin. A curvature-corrected micropower voltage reference [ A ]. Solid-State Circuits Conference. Digest of Technical Paper[ C] .New York, 1981,2:58-59.
  • 9G C M Meijer,P C Schmale, K van Zalinge. A new curvaturecorrected bandgap reference[ J]. IEEE J Solid State Circuit, 1982, SC-17(11) : 1139-1143.
  • 10H J Oguey,B Gerber. MOS voltage reference based on polysilicon gate work function difference[ J ]. IEEE J Solid State Circuit, 1980, SC-15 (6) :264-268.

共引文献6

同被引文献9

  • 1池保勇.模拟集成电路设计[M].北京:清华大学出版社,2009.
  • 2Shu Jun,Cai Min.A low supply dependence fully-MOSFET voltage reference for low voltage and low power[C].Pro- ceeding of IEEE Asia Pacific Conference on Circuits and Systems, Guangzhou, 2008 : 442-445.
  • 3Zhou Zekun,Zhu Peisheng, Shi Yue, et al.A CMOS voltage reference based on mutual compensation of Vtn and Vtp[J]IEEE Trans.-Cir.Syst. 11 : ExPress Briefs, 2012,59(16) : 341-345.
  • 4Zhou Zekun,Zhu Peisheng A resistorless CMOS voltage reference based on mutual vompensation of VT and VTH[J].IEEE Trans .Cine,Syst Ⅱ:EExpress Briefs, 2013 , 60(9) : 582- 586.
  • 5ANVESHA A,BAGHINI M S.A.sub-Ⅳ 32hA processohage and temperature[C],2013 26th International Confer- ence on VLSI Design :Concurrently vith the 12lh lnlerna- tional Conference on Embedded Svslenls Design, Pune, India 2013: 136-141.
  • 6魏延存,陈莹梅,胡正飞.模拟CMOS集成电路设计[M].北京:清华大学出版社,2010.
  • 7孙宇,肖立伊.一种新型的CMOS亚阈值低功耗基准电压源[J].微电子学与计算机,2012,29(6):51-56. 被引量:4
  • 8朱龙飞,莫太山,叶甜春.高电源抑制比低温漂带隙基准源设计[J].电子技术应用,2013,39(5):35-37. 被引量:3
  • 9宋文青,于奇,冯纯益,张军,朱波,郑杰.一种全MOS低温漂电压基准源的研究[J].微电子学,2013,43(2):210-212. 被引量:1

引证文献1

二级引证文献3

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部