期刊文献+

Simulation Study on a Heat Pump System Using R744/R290 as Refrigerant 被引量:3

Simulation Study on a Heat Pump System Using R744/R290 as Refrigerant
在线阅读 下载PDF
导出
摘要 Based on the Chinese National Standards involving heat pump water heater and space heating system, performances of the R744/R290 subcritical heat pump system have been discussed and compared with those of the R22 system, which is widely used in heat pump systems in China nowadays. It can be indicated that R744/R290 mixture can work efficiently as a refrigerant for heat pumps with a large heat-sink temperature rise. When mass fraction of R290 is increased, discharge pressure is reduced. Under the nominal working condition, there is an optimum mixture mass fraction of 20/80 for R744/R290 under conventional condensation pressure. Both the heating COPhs (coefficient of performance) and volumetric heating capacity are increased by about 12.62% and 34.24% respectively compared with those of R22 based system. But for the heat sink with a small temperature rise, R744/R290 system has poorer performances than R22 system. When heat transfer pinch point in evaporator and condensation processes is considered, the degree of superheat has a negative influence upon system performances under the given conditions.
出处 《Journal of Civil Engineering and Architecture》 2013年第2期220-226,共7页 土木工程与建筑(英文版)
关键词 Carbon dioxide PROPANE subcritical heat pump pinch point COP. 热泵系统 制冷剂 中国国家标准 仿真 加热系统 质量分数 性能系数 热泵热水器
  • 相关文献

参考文献13

  • 1J.H. Kim, J.M. Cho, M.S. Kim, Cooling performance of several CO2/propane mixtures and glide matching with secondary heat transfer fluid, Int. J. Refrig. 31 (5) (2008) 800-806.
  • 2S.G. Kim, M.S. Kim, Experiment and simulation on the performance of an autocascade refrigeration system using carbon dioxide as a refrigerant, Int. J. Refrig. 25 (8) (2002) 1093-110 1.
  • 3B.L. Niu, Y.F. Zhang, Experimental study of the refrigeration cycle performance for the R7441R290 mixtures, Int. I. Refrig. 30 (1) (2007) 37-42.
  • 4J.H. Kim, I.M. Cho, I.H. Lee, I.S. Lee, M.S. Kim, Circulation concentration of CO2/propane mixtures and the effect of their charge on the cooling performance in an air-conditioning system, Int. I. Refrig. 30 (1) (2007) 43-49.
  • 5I.M. Cho, Y.I. Kim, M.S. Kim, Experimental studies on the characteristics of evaporative heat transfer and pressure drop of CO2/propane mixtures in horizontal and vertical smooth and micro-fin tubes, Int. J. Refrig. 33 (1) (2010) 170-179.
  • 61. Sarkar, S. Bhattacharyya, Assessment of blends of CO2 with butane and isobutane as working fluids for heat pump applications, Int. J. Therm. Sci. 48 (7) (2009) 1460-1465.
  • 7X.P. Zhang, X.W. Fan, F.K. Wang, H.G. Shen, Theoretical and experimental studies on optimum heat rejection pressure for a CO2 heat pump system, Appl. Therm. Eng. 30 (16) (2010) 2537-2544.
  • 8P.G. Zhao, L. Zhao, G.L. Ding, c.t, Zhang, Temperature matching method of selecting working fluids for geothermal heat pumps, Appl. Therm. Eng. 23 (2) (2003) 179-195.
  • 9S.A. Klein, Engineering Equation Solver, Academic Commercial Version 8.889, Wisconsin Madison, 2011.
  • 10EES_REFPROP Inerface, NIST (National Institute of Standards and Technology), USA, 2010.

同被引文献28

引证文献3

二级引证文献8

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部