摘要
探讨亚麻/棉55/45 164 tex竹节纱的纺纱工艺。针对亚麻纤维和棉纤维的性能特点,对亚麻纤维进行纺前预处理;亚麻纤维与棉纤维采用包混,并选用开清棉机组进行两次开松及混和;加大亚麻纤维的投料比例;合理配置各工序工艺参数,最终成功纺制出亚麻/棉55/45 164 tex竹节纱,其质量满足了使用要求。
Spinning processing of flax/cotton 55/45 164 tex slub yarn was discussed. According to characteristics of flax fiber and cotton fiber, flax fiber was pre-treated before spinning. The two kinds fiber were blended by bales, open- ing and picking machine were adopted twice. Blending ratio of flax fiber should be increased. Parameter in each process should be selected properly. Through implementing the above measures ,finally flax/cotton 55/45 164 tex slub yarn can be spun successfully.the aualitv can reach use demands.
出处
《棉纺织技术》
CAS
北大核心
2013年第3期41-42,共2页
Cotton Textile Technology
关键词
亚麻纤维
棉纤维
竹节纱
预处理
混纺比
罗拉隔距
Flax Fiber, Cotton Fiber, Slub Yarn, Pre-treatment, Blending Ratio, Roller Gauge
