期刊文献+

氮气泡沫驱用起泡剂优选及起泡性能评价 被引量:7

Optimization of Foaming Agent and Evaluation of Foaming Performance of Nitrogen Foam Flooding
在线阅读 下载PDF
导出
摘要 以综合起泡能力作为评价指标,利用Waring Blender评价方法,在对常用起泡剂进行初选的基础上,对起泡剂的起泡性能及起泡剂加入浓度、稳泡剂加入浓度进行了评价和优选.结果表明:HY-2型起泡剂在模拟油田地层水下具有较好的综合起泡能力,起泡剂加入浓度为0.5%,液相黏度对起泡剂的稳定性影响较大,存在一个最优的液相黏度值,稳泡剂加入浓度不应小于700 mg/L.原油的存在使泡沫的起泡体积和稳定性均呈现下降的趋势.泡沫的这种特性,有利于调整高低渗透层中的流度差异. Having comprehensive foaming ability as evaluation index, using the evaluation methodology of Waring Blender, on the base of the primary selection of the foamers in common use, the foaming performance is evaluated and the concentration of foamer and foam stabilizer are optimized. The results show that the foamer of HY-2 has a better comprehensive foaming ability and the concentration of foamer is 0.5%. The liquid viscosity effect for foaming performance showed that there exists an optimal value of the liquid viscosity, corresponding to the concentration of foam stabilizing agent should not be less than 700 mg/L. The presence of crude oil make the foaming volume and stability of the foam having a downward trend, the character of which is very advantageous to adjust fluidity difference between the layers of high permeable formation and low permeable formation.
出处 《河南科学》 2012年第12期1792-1796,共5页 Henan Science
基金 陕西省教育厅专项科研计划项目(11JK0791) 西安市科技计划项目--技术转移促进工程(CX12184(3))
关键词 泡沫 起泡剂 起泡性能 优选 评价 foam foamer foaming performance optimization evaluation
  • 相关文献

参考文献4

二级参考文献13

  • 1王增林,王其伟.强化泡沫驱油体系性能研究[J].石油大学学报(自然科学版),2004,28(3):49-51. 被引量:67
  • 2张振华.可循环微泡沫钻井液研究及应用[J].石油学报,2004,25(6):92-95. 被引量:43
  • 3李兆敏,孙茂盛,林日亿,李勇,徐永辉.泡沫封堵及选择性分流实验研究[J].石油学报,2007,28(4):115-118. 被引量:96
  • 4Francols Fried,Chen W H and Gaugiitz P A.Experimental and Simulation Study of High-Temperature Foam Displacement in Porous Media[J].SPE 17357.
  • 5Jensen J A,Fried F.Physical and Chemical Effects of an Oil Phase On the Propagation of Foam in Porous Media[J].SPE 16375.
  • 6Khatib Z I,Hirasaki G J,Falls A H.Effects of Capillary Pressure on Coalescence and Phase Mobilities in Foams FLowing Through Porous Media[J].SPE 15442.
  • 7Fisher A W,Fouiser R W S and Goodyear S G etc.Mathematical Modeling of Foam Flooding[J].SPE 20195.
  • 8Daan Veeningen,Pacelli L J,Zitha etc.Understanding Foam Flow Physics:The Role of Permeability[J].SPE 38197.
  • 9Parlar M,Nelson E B,Walton I C,et al.An experimental study on fluid-loss behavior of fracturing fluids and formation damage in high-permeability porous media[R].SPE 30458,1995:22-25.
  • 10Behenna R R.Acid diversion from an undamaged to a damaged core using multiple foam slugs[R].SPE 30121,1995:15-16.

共引文献105

同被引文献26

引证文献7

二级引证文献17

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部