期刊文献+

Sc、Zr联合作用对Al-Si合金组织和性能的影响 被引量:5

Combination Effect of Sc/Zr on the Microstructures and Properties of Al-Si Alloys
原文传递
导出
摘要 研究了Sc、Zr联合作用对Al-Si合金组织和性能的影响。结果表明,Sc加入到Al-Si合金中后,不仅能够有效地细化共晶团并析出弥散强化相,同时Sc能够参与到高温AlCuNi相的形成过程中,进而影响其形态及分布。因此,Sc的加入能够有效地改善Al-Si合金的硬度及抗拉强度,特别是其高温抗拉强度。Zr与Sc的添加强化了Sc细化共晶团的作用,减少了含Sc粒子析出所需的Sc含量,从而使Sc参与到更多AlCuNi相的形成过程。 Combination ettects of Sc/Zr on the microstructures and properties of A1-Si alloys were investi- gated. The results show that the Se addition can not only refine the eutectic colony and form the Sc con- taining precipitates in A1-Si alloys, but also take part in the formation of A1CuNi high temperature phase, and then influence its morphology and distribution. As a result, the hardness and strength of A1- Si alloys are improved, especially the high temperature strength. Combination addition of Zr and Sc, can enhance the refinement efficiency of Sc on the eutectic colony and reduce the content of Sc in the Sc con- taining precipitates. Therefore, Se can take part in the formation of much more A1CuNi phase.
出处 《特种铸造及有色合金》 CAS CSCD 北大核心 2012年第12期1171-1174,共4页 Special Casting & Nonferrous Alloys
基金 中央高校基本科研业务费专项资金(11QG67)
关键词 AL-SI合金 SC ZR 联合作用 A1-Si Alloys, Sc, Zr, Combination Effects
  • 相关文献

参考文献15

  • 1葛郢汉.活塞的材料分析[J].现代机械,2006(5):52-53. 被引量:16
  • 2王杰芳,谢敬佩,刘忠侠,李继文,翁永刚,王明星.国内外铝硅活塞合金的研究及应用述评[J].铸造,2005,54(1):24-27. 被引量:65
  • 3HAQUE M M, MALEQUE M A. Effect of process variables on structure and properties of aluminium-silicon piston alloy [J]. Jour- nal of Materials Processing Technology, 1998, 77: 122-128.
  • 4YU L N, LIU X F, DING H Met al. A new nucleation mechanism of primary Si by like-peristaltic coupling of AlP and A14C3 in near eutectic AI-Si alloy[J]. Journal of Alloys and Compounds, 2007, 429: 119-125.
  • 5XIONG B Q, ZHANG Y G, WEI Q,et al. The study of primary Si in spray-forming hypereutectie At-Si alloy [J]. Journal of Materials Processing Technology, 2003.137: 183-186.
  • 6ROBLES HERNANDEZ F C, SOKOLOWSKI J H. Comparison a mong chemical and electromagnetic stirring and vibration melt treatments for A1-Si hypereutectie alloys [J]. Journal of Alloys and Compounds, 2006, 426: 205-212.
  • 7ELMADALI M, ALPAS A T. Progression of wear in the mild wear regime of an Al-18. 5Si (A390) alloy [J].Wear, 2006, 261: 367-381.
  • 8SUN Yingying,SONG Min,HE Yuehui.Effects of Sc content on the mechanical properties of Al-Sc alloys[J].Rare Metals,2010,29(5):451-455. 被引量:7
  • 9戴晓元,喻井萍,寇莉莉.Sc微合金化对Al-Zn-Mg-Cu-Zr合金组织性能的影响[J].材料热处理学报,2010,31(6):89-94. 被引量:16
  • 10NORMAN A F,PRANGNELL P B,MCEWEN R S. The solidifi- cation behavior of dilute aluminium-scandium alloys [J]. Acta Materialia, 1998, 46 (16):5 715-5 732.

二级参考文献101

共引文献124

同被引文献41

引证文献5

二级引证文献6

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部