摘要
针对辽河冷一联老化油,研制出低温高效的聚醚类破乳剂WL-146,最佳合成条件为:丙烯酸、马来酸酐摩尔比2:1,混合酸(以羧基计)、破乳剂单体(以羟基计)摩尔比1.3:1,引发剂BPO用量为混合酸质量的10%,聚合反应温度80℃,聚合时间2 h,酯化反应温度140℃,酯化时间6 h。用红外光谱法对所得改性破乳剂的结构进行了表征,并考察了其对辽河冷一联老化油的破乳脱水性能。结果表明,反应得到目标共聚物,反应较完全。WL-146破乳剂在70℃、加量400 mg/kg的条件下,对冷一联老化油的脱水率达78.54%,老化油三相分离明显,界面清晰,而标样SP-169对老化油的脱水率仅为20.40%。WL-146、SP-169破乳脱出水的电导率分别为325.00、248.00μs/cm2。WL-146破乳脱水效果好于SP-169。
Aimed at Lengyilian aged oil in Liaohe oilfield, a low temperature and efficient polyether demulsifier WL-146 was developed. The optimum synthesis condition was obtained as follows ： a combination of acrylic acid and maleic anhydride in molar ratio 2：1, acid mixture （carboxyl） and demulsifier （hydroxyl） in molar ratio 1.3：1, 10% initiator benzoyl peroxide （BPO） dosage for mixed acid in quality, 80℃ polymerization temperature, 2 h aggregate time, 140℃ esterification reaction temperature, and 6 h esterification time. The structure of WL-146 was characterized by Fr-IR and the dehydration effect on aged oil was studied. The results showed that objective copolymer was obtained through the reaction. The dehydration rate of aged oil treated by demulsifier WL-146 at 70℃ and 400 mg/kg dosage was up to 78.54%, and three-phase separation was visible with clear interface, while that by SP-169 was only 20.40%. Dehydration water conductivity of WL-146 and SP-169 was of 325 and 248 μs/cm^2, respectively. The dehydration effect of WL-146 was better than that of SP-169.
出处
《油田化学》
CAS
CSCD
北大核心
2012年第4期478-481,共4页
Oilfield Chemistry
基金
中国石油资助项目“辽河油田稠油老化油物性分析及脱水技术研究”(项目编号20100100489)
关键词
聚醚类
破乳剂
改性
老化油
脱水率
辽河油田
polyethers
demulsifier
modified
aged oil
dehydration rate
Liaohe oil fields
