期刊文献+

颈椎前路钢板并轴向螺钉固定治疗屈曲牵张型损伤的解剖学研究

Anterior cervical plating plus axial screw fixation for treating cervical flexion-distraction injury:anatomic study
原文传递
导出
摘要 目的提出一种联合颈椎前路钢板固定治疗屈曲牵张型颈椎损伤的新术式—颈椎轴向螺钉固定术,进行解剖学可行性研究。方法随机调取50例正常成年志愿者的颈椎侧位片。年龄22~48岁,平均28岁。通过JW-PACS图像系统,测量C2~6椎体高度;C2/3~C5/6椎间盘高度以及椎间盘矢径;并模拟轴向螺钉固定,即下位椎体前下缘至上位椎体后上缘的连线,测量轴向螺钉最大长度、头倾角以及植骨块深度等。采用一例防腐成人尸体标本,在C臂X线机透视下,模拟颈椎前路钢板固定并颈椎轴向螺钉固定术。结果轴向螺钉最大长度为(41.18±3.92)mm,轴向螺钉头倾角为(25.21±3.58)°。植骨块合适深度应小于椎间盘矢径(17.09±1.50)mm,且大于(11.69±1.63)mm,即略大于12 mm。尸体模拟手术表明,颈椎前路轴向螺钉固定在C2/3、C3/4、C4/5、C5/6均可以顺利完成,C6/7节段由于胸骨阻挡,无法进行轴向螺钉固定。结论颈椎前路钢板并轴向螺钉固定术治疗屈曲牵张性损伤具有操作可行性。 Objective To study the anatomical flexibility of anterior cervical plating plus axial screw fixation for treating cervical flexion-distraction. Methods Fifty cases of digital lateral X-ray films from adult healthy volunteers aged 24~48 years, with mean 28 years, were measured directly in the JW-PACS picture system. Measuring parameters included vertebral body height, intervertebral disc height and disc depth. The line started from anteroinferior point of the inferior vertebrae to posterosuperior point of the superior vertebrae was drawn to mimic the axial screw fixation in the lateral film. The maximal screw length, screw cephalic inclination angle and the distance between screw and anterior vertebral margin at disc level was recorded. Simulated anterior cervical plating and axial screw fixation was carried out in one preserved human specimen under the guidance of C-arm X-ray fluoroscope. Results The maximal length of anterior cervical axial screw was (41.18±3.92 )mm, and the axial screw inclination angle (25.21±3.58)°. The suitable depth of interbody graft was more than (11.69±1.63)mm, but less than (17.09±1.50)mm of disc depth. Simulated procedure in the preserved specimen demonstrated that axial screw fixation could be successfully completed at C2/3, C3/4, C4/5, and C5/6 levels, but difficult be performed at C6/7 due to obstacle of sternum. Conclusions The flexibility of axial screw fixation plus anterior cervical plating is confirmed from this study for managing of cervical flexion-distraction injuries.
出处 《中国临床解剖学杂志》 CSCD 北大核心 2012年第5期506-508,512,共4页 Chinese Journal of Clinical Anatomy
关键词 颈椎 屈曲牵张型损伤 前路钢板固定 轴向螺钉 解剖 Cervical spine Flexion-distraction injury Anterior cervical plating Anterior axial screw Anatomy
  • 相关文献

参考文献13

  • 1Aebi M. Surgical treatment of upper, middle and lower cervical injuries and non-unions by anterior procedures [J]. Eur Spine J, 2010, 19 (Suppl 1):33-39.
  • 2Paxinos O, Ghanayem AJ, Zindrick MR, et al. Anterior cervical discectomy and fusion with a locked plate and wedged graft effectively stabilizes flexion-distraction stage-3 injury in the lower cervical spine: a biomechanical study[J]. Spine, 2009,34(1):E9-15.
  • 3Johnson MG, Fisher CG, Boyd M, et al. The radiographic failure of single segment anterior cervical plate fixation in traumatic cervical flexion distraction injuries[J]. Spine, 2004,29(24):2815-2820.
  • 4Song KJ, Lee KB. Anterior versus combined anterior and posterior fixation/fusion in the treatment of distraction-flexion injury in the lower cervical spine[J]. J Clin Neurosci, 2008, 15(1):36-42.
  • 5Do Koh Y, Lim TH, Won You J, et al. A biomechanical comparison of modem anterior and posterior plate fixation of the cervical spine [J]. Spine, 2001,26(1): 15 -21.
  • 6瞿东滨,金大地.前路减压合并自行设计的蝶形钢板内固定系统治疗颈椎间盘突出症[J].第一军医大学学报,2003,23(3):254-256. 被引量:3
  • 7Aebi M. Transpedicular-Transdiscal-Transcorporal (TPDC)-Fixation. In: Szpalski M, et al. (eds).Surgery for Low Back Pain [P].Springer-Verlag Berlin Heidelberg,2010.147-154.
  • 8Cragg A, Carl A, Casteneda F, et al. New percutaneous access method for minimally invasive anterior lumbosacral surgery[J].J Spinal Disord Tech, 2004,17(1):21-28.
  • 9Erkan S, Wu C, Mehbod AA, et al. Biomechanical evaluation of a new AxiaLIF technique for two-level lumbar fusion [J]. Eur Spine J, 2009,18 (6):807-814.
  • 10Ledet EH, Tymeson MP, Salerno S, et al. Biomechanical evaluation of a novel lumbosacral axial fixation device[J]. J Biomech Eng, 2005, 127(6): 929-933.

二级参考文献1

共引文献2

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部