期刊文献+

多机器人协作系统轨迹约束关系分析及示教方法 被引量:21

Path Constraint Relation and Trajectory Teaching Method for Multi-Robot Cooperation System
原文传递
导出
摘要 针对多机器人协作中末端位姿的相对运动,分析了其轨迹约束关系并据此提出了一种可行的示教方法.该方法首先分析了协作机器人之间的运动学约束关系,根据协作机器人之间末端位姿的相对运动,将多机器人协作系统的运动模式分为耦合运动以及叠加运动2类.然后给出了这2种运动形式下,主从机器人末端位姿在笛卡儿坐标系内的运动学约束方程并据此提出一种用于多机器人协作系统的轨迹示教方法,最后在搭建的双机器人协作焊接系统上,验证了本文提出的约束关系及示教方法. Based on the relative motion between the pose of cooperated multi-robot end-effectors, the trajectory constraint relation of the cooperative robots is analyzed and a practicable teaching method is proposed. Firstly the method analyzes the kinematic constraint relation between the cooperative robots. According to relative motions between cooperative robot end-effectors, cooperative motion can be divided into two types, coupled motion and superposed motion. Then, the kinematic constraint relation equation of the pose of master-slave robot end-effectors in the Cartesian coordinate system is given in the two motion types. Based on the constraint equation, a trajectory teaching method for multi-robot cooperation system is proposed. Finally, two-robot cooperation system for welding is set up, using which the constraint relation is testified and the teaching method proposed is validated.
出处 《机器人》 EI CSCD 北大核心 2012年第5期546-552,565,共8页 Robot
基金 国家自然科学基金资助项目(61175113) 国家863计划资助项目(2009AA043903-1-1 2007AA041703) 江苏省科技成果转化项目(BA2007058) 江苏省普通高校研究生科研创新计划项目(CX10B 076Z)
关键词 多机器人协作 轨迹约束 示教 协作焊接 multi-robot cooperation trajectory constraint teaching cooperative welding
  • 相关文献

参考文献14

  • 1高为炳.多机器人系统的动力学与协调控制[J].控制与决策,1992,7(3):161-168. 被引量:9
  • 2Kosuge K, Ishikawa J, Furuta K, et al. Control of single-master multi-slave manipulator system using VIM[C]//IEEE International Conference on Robotics and Automation. Piscataway, NJ, USA: IEEE, 1990: 1172-1177.
  • 3Zhu W H. On adaptive synchronization control of coordinated multirobots with flexible/rigid constraints[J]. IEEE Transactions on Robotics, 2005, 21(3): 520-525.
  • 4Tavasoli A, Eghtesad M, Jafarian H. Two-time scale control and observer design for trajectory tracking of two cooperating robot manipulators moving a flexible beam[J]. Robotics and Autonomous Systems, 2009, 57(2): 212-221.
  • 5Cook G E, Andersen K, Zein-Sabattou S, et al. Multiple-robot programming for coordinated motion, end-effector calibration, and part localization[C]//Conference Record of the IEEE Industry Applications Society Annual Meeting. Piscataway, NJ, USA: IEEE, 1989: 1669-1674.
  • 6Agapakis J E, Katz J M, Pieper D L. Programming and control of multiple robotic devices in coordinated motion[C]//IEEE International Conference on Robotics and Automation. Piscataway, NJ, USA: IEEE, 1990: 362-367.
  • 7Jouaneh M K, Wang Z, Dornfeld D A. Trajectory planning for coordinated motion of a robot and a positioning table. I. Path specification[J]. IEEE Transactions on Robotics and Automation, 1990, 6(6): 735-745.
  • 8Ahmad S, Luo S. Coordinated motion control of multi- ple robotic devices for welding and redundancy coordination through constrained optimization in Cartesian space[J]. IEEE Transactions on Robotics and Automation, 1989, 5(4): 409-417.
  • 9Pashkevich A E Dolgui A B, Semkin K I. Kinematic aspects of a robot-positioner system in an arc welding application[J]. Control Engineering Practice, 2003, 11(6): 633-647.
  • 10Gan Y H, Dai x z. Base frame calibration for coordinated industrial robots[J]. Robotics and Autonomous Systems, 2011, 59(7/8): 563-570.

共引文献8

同被引文献110

引证文献21

二级引证文献89

相关作者

内容加载中请稍等...

相关机构

内容加载中请稍等...

相关主题

内容加载中请稍等...

浏览历史

内容加载中请稍等...
;
使用帮助 返回顶部